Mining Incidents

Cam Creek Mine: 95 MSHA citations Coal

Kentucky Energy LLC · Surface
Controlled by Charles W Hyden
Martha, Lawrence County, KY  ·  Abandoned
MSHA Mine ID: 1518829

Cam Creek Mine has $19K in proposed MSHA penalties and $585 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Cam Creek Mine.

Fatalities
0
Total incidents
3
Years on record
2005–2009
Latest incident
Jan 2009
Compliance record
MSHA citations since 2005
95
citations
47
significant & substantial
$18,659
proposed penalties
$18,074
paid to date
97% of proposed penalties paid to date, a $585 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2005
46
inspections on record
1,595
inspection hours
6.0
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
95 citations across 1,595 inspection hours.
Source: MSHA inspections data, updated weekly.

Cam Creek Mine has $19K in proposed MSHA penalties and $585 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$19K
proposed penalties
$19K
current assessed
$18K
paid to date
$585
outstanding
93 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2018-08-02.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
50.5%
significant & substantial
3.2%
high negligence or reckless
50.5%
reasonably likely or greater
26.9%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 1.1% low, 95.7% moderate, 3.2% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.

MSHA sampling at Cam Creek Mine shows 99% of 92 respirable coal dust samples met the 1.5 mg/m3 standard.

Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2018-10-31, 7 years ago
99%
within 1.5 mg/m3
92
samples
2.39
dust max (mg/m3)
1
over MSHA ECV
The excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.
81 samples taken by MSHA inspectors, 11 by the operator.
Most-sampled occupations
  • BULLDOZER OPERATOR36
  • HIGHLIFT OPERATOR/FRONT END LOADER16
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE14

Silica (quartz)

Last sampled: 2018-11-06, 7 years ago
7.0
silica avg (%)
13
samples
40.8
silica max (%)
Most-sampled occupations
  • BULLDOZER OPERATOR12
  • HIGHWALL DRILL OPERATOR1

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2018-10-31, 7 years ago
3%
over PEL
59
samples
Most-sampled occupations
  • BULLDOZER OPERATOR19
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE11
  • HIGHLIFT OPERATOR/FRONT END LOADER9
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Health sampling trend
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Year within 1.5 mg/m3 samples
2018 100% 15
2017 100% 13
2016 100% 2
2015 100% 4
2014 100% 12
2013 100% 5
2009 100% 5
2008 100% 4
2006 100% 14
2005 94% 18
Silica (quartz) by year
Year silica avg (%) samples
2018 3.8 4
2017 1.9 4
2016 1.3 1
2015 6.7 1
2009 40.8 1
2006 8.2 1
2005 11.0 1
Noise by year
Year over PEL samples
2018 0% 8
2017 0% 5
2016 0% 3
2015 0% 4
2014 10% 10
2013 0% 6
2009 0% 8
2008 0% 4
2006 0% 1
2005 10% 10
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Cam Creek Mine recorded 0.00 reportable injury cases per 100 full-time workers in 2018.

Injury rate, 2018
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 3.34 and the all-US-mining average was 2.33 cases per 100 workers.
In Kentucky, coal mining averaged 3.81 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2018 * 0.00 0.00 0.000
2014 * 0.00 0.00 0.000
2009 * 6.38 0.00 0.000
2006 * 4.42 4.42 0.000
2005 * 4.31 4.31 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Locust Grove, Inc. 2005 to 2008
  2. Apostle Fuels Inc 2008 to 2011
  3. Cam Creek Investments, LLC 2011 to 2013
  4. Genesis Mining, LLC 2013 to 2013
  5. Kentucky Energy LLC 2013 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year Employees Coal produced (tons)
2019 0
2018 10 32,404
2017 5 10,486
2016 1
2015 5 4,908
2014 14 56,374
2013 9 14,569
2009 22 82,278
2008 23 35,029
2007 2 354
2006 17 154,779
2005 16 153,882
Source: MSHA quarterly employment and production, updated weekly.

Cam Creek Mine sits in Lawrence County, Kentucky, where the Census mining category is 3.4% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Lawrence County, Kentucky · Population 16,171
3.4%
Mining share of county employment
$45,584
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2019 Q2 0 0 0
2019 Q1 0 0 0
2018 Q4 757 0 0 0.0
2018 Q3 11,919 3 1 251.7
2018 Q2 4,398 6 4 1364.3
2018 Q1 3,128 1 0 319.7
2017 Q4 3,792 2 0 527.4
2017 Q3 1,715 0 0 0.0
Show 32 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2017 Q2 1,078 1 0 927.6
2017 Q1 821 0 0 0.0
2016 Q4 746 3 1 4021.4
2016 Q3 0 0 0
2016 Q2 0 0 0
2016 Q1 0 0 0
2015 Q4 0 0 0
2015 Q3 8,819 0 0 0.0
2015 Q2 0 2 0
2015 Q1 4,795 4 0 834.2
2014 Q4 9,092 0 0 0.0
2014 Q3 7,651 7 1 914.9
2014 Q2 6,993 0 0 0.0
2014 Q1 6,465 4 2 618.7
2013 Q4 6,295 0 0 0.0
2013 Q3 1,967 2 2 1016.8
2013 Q2 1,433 0 0 0.0
2009 Q4 629 3 1 4769.5
2009 Q3 4,710 3 1 636.9
2009 Q2 12,506 4 2 319.8
2009 Q1 13,502 4 4 296.3
2008 Q4 9,730 0 0 0.0
2007 Q2 0 0 0
2007 Q1 1,589 0 0 0.0
2006 Q4 6,135 0 0 0.0
2006 Q3 8,543 0 0 0.0
2006 Q2 14,771 10 5 677.0
2006 Q1 15,795 0 0 0.0
2005 Q4 14,076 11 8 781.5
2005 Q3 15,850 4 3 252.4
2005 Q2 11,581 0 0 0.0
2005 Q1 4,858 8 5 1646.8
No fatalities recorded at this mine.

Reportable incidents

3 on file

2009 · 1 incident

January 26, 2009 KY · Coal greaser, grease man, oiler, lube man, dragline oiler SLIP OR FALL OF PERSON
Apostle Fuels Inc · Fall from machine

Lube technician was attempting to climb upon a D9N Dozer to check it out and start it, had a slip and fall. There was no laceration to the face, he was just bruised.

2006 · 1 incident

June 13, 2006 KY · Coal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator POWERED HAULAGE
Locust Grove, Inc. · Struck against a moving object

Employee was in 988f. when the loader went in a hole causing him pain to his back.

2005 · 1 incident