Mining Incidents

Carroll Canyon Plant: 50 MSHA citations Metal/Non-Metal

CalMat Co · Surface
Controlled by Vulcan Materials Company
San Diego, San Diego County, CA  ·  Abandoned
MSHA Mine ID: 0401932

Carroll Canyon Plant has $6K in proposed MSHA penalties and $0 outstanding across 1 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Carroll Canyon Plant.

Fatalities
0
Total incidents
48
Years on record
1985–2019
Latest incident
Nov 2019
Compliance record
MSHA citations since 2002
50
citations
5
significant & substantial
$5,667
proposed penalties
$5,409
paid to date
95% of proposed penalties paid to date, a $258 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
63
inspections on record
1,162
inspection hours
4.3
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
50 citations across 1,162 inspection hours.
Source: MSHA inspections data, updated weekly.

Carroll Canyon Plant has $6K in proposed MSHA penalties and $0 outstanding across 1 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$6K
proposed penalties
$5K
current assessed
$5K
paid to date
$0
outstanding
50 assessments are final orders; 1 contested dockets.
Of $1K in penalties contested before the Commission, $836 was upheld in final decisions.
As of the most recent assessment on 2023-01-25.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
10.0%
significant & substantial
0.0%
high negligence or reckless
10.0%
reasonably likely or greater
42.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 28.0% low, 72.0% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
5 citations taken to the federal commission · 10% of citations on record
  • Settled 5 · 100%
0%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 3 decided S&S contests · industry: 79%
24%
Penalty reduction in decided contests
$1K proposed, $836 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2018-07-15.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
WEST 2018-0486 Settlement Miller 2018 $1K → $836
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2022-04-20, 4 years ago
0%
of limit-tested samples over the exposure limit
20
samples
3
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg15
  • Quartz, respirable, >1% Qtz4
  • Unlisted Particulate, respirable, <1% Qtz1
Show the individual readings (20)
Date Contaminant Concentration Limit Conc / limit Occupation
2022-04-20 Respirable dust, <.1mg 0 Front-end Loader Operator
2020-10-28 Respirable dust, <.1mg 0 Bulldozer Operator
2020-10-28 Quartz, respirable, >1% Qtz 0.14 Dry Screen Plant Operator
2020-07-29 Respirable dust, <.1mg 0 Crusher Oper/Worker
2020-07-29 Respirable dust, <.1mg 0 Scraper Operator
2014-10-09 Respirable dust, <.1mg 0 Front-end Loader Operator
2014-10-09 Respirable dust, <.1mg 0 Crusher Oper/Worker
2010-04-07 Respirable dust, <.1mg 0 Crusher Oper/Worker
2010-04-07 Respirable dust, <.1mg 0 Bulldozer Operator
2010-04-07 Respirable dust, <.1mg 0 Utility Man
2005-05-11 Quartz, respirable, >1% Qtz 0.28 0.72 0.39 Crusher Oper/Worker
2005-05-11 Respirable dust, <.1mg 0 Crusher Oper/Worker
2005-05-11 Respirable dust, <.1mg 0 Crusher Oper/Worker
2005-05-11 Respirable dust, <.1mg 0 Bulldozer Operator
2005-05-11 Respirable dust, <.1mg 0 Front-end Loader Operator
2003-07-29 Quartz, respirable, >1% Qtz 1.16 3.27 0.35 Front-end Loader Operator
2003-07-29 Respirable dust, <.1mg 0 Belt Crew
2003-07-29 Respirable dust, <.1mg 0 Dry Screen Plant Operator
2002-02-07 Quartz, respirable, >1% Qtz 0.13 1.2 0.11 Bulldozer Operator
2002-02-07 Unlisted Particulate, respirable, <1% Qtz 0.14 Front-end Loader Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Carroll Canyon Plant recorded 0.00 reportable injury cases per 100 full-time workers in 2021.

Injury rate, 2021
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.87 and the all-US-mining average was 2.19 cases per 100 workers.
In California, metal and nonmetal mining averaged 2.03 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2021 * 0.00 0.00 0.000
2020 * 0.00 0.00 0.000
2019 * 6.68 3.34 0.000
2018 * 0.00 0.00 0.000
2017 * 3.71 0.00 0.000
2016 * 0.00 0.00 0.000
2015 * 3.97 0.00 0.000
2014 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Calmat Company 1950 to 1999
  2. CalMat Co 1999 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2022 15
2021 20
2020 25
2019 25
2018 26
2017 25
2016 22
2015 21
2014 21
2013 24
2012 23
2011 30
2010 21
2009 19
2008 21
2007 28
2006 27
2005 24
2004 22
2003 22
2002 22
2001 23
2000 24
Source: MSHA quarterly employment and production, updated weekly.

Carroll Canyon Plant sits in San Diego County, California, where the Census mining category is 0.0% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
San Diego County, California · Population 3,282,782
0.0%
Mining share of county employment
$102,285
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2022 Q1 7,815 1 0 128.0
2021 Q4 8,630 0 0 0.0
2021 Q3 11,003 0 0 0.0
2021 Q2 12,954 1 0 77.2
2021 Q1 13,189 0 0 0.0
2020 Q4 13,608 0 0 0.0
2020 Q3 13,672 0 0 0.0
2020 Q2 12,525 0 0 0.0
Show 80 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2020 Q1 14,654 0 0 0.0
2019 Q4 14,656 0 0 0.0
2019 Q3 15,574 0 0 0.0
2019 Q2 16,320 1 0 61.3
2019 Q1 13,344 0 0 0.0
2018 Q4 13,853 0 0 0.0
2018 Q3 15,273 0 0 0.0
2018 Q2 15,760 0 0 0.0
2018 Q1 15,918 0 0 0.0
2017 Q4 14,552 0 0 0.0
2017 Q3 15,273 0 0 0.0
2017 Q2 11,391 0 0 0.0
2017 Q1 12,744 0 0 0.0
2016 Q4 12,353 0 0 0.0
2016 Q3 13,337 0 0 0.0
2016 Q2 15,191 0 0 0.0
2016 Q1 11,794 0 0 0.0
2015 Q4 11,824 2 1 169.1
2015 Q3 13,348 0 0 0.0
2015 Q2 12,784 0 0 0.0
2015 Q1 12,479 0 0 0.0
2014 Q4 11,483 2 1 174.2
2014 Q3 12,209 0 0 0.0
2014 Q2 12,280 0 0 0.0
2014 Q1 12,451 0 0 0.0
2013 Q4 10,616 0 0 0.0
2013 Q3 12,718 1 0 78.6
2013 Q2 13,931 0 0 0.0
2013 Q1 13,566 0 0 0.0
2012 Q4 12,750 0 0 0.0
2012 Q2 12,809 1 0 78.1
2012 Q1 13,651 0 0 0.0
2011 Q4 17,754 0 0 0.0
2011 Q3 18,540 0 0 0.0
2011 Q2 13,282 0 0 0.0
2011 Q1 16,844 0 0 0.0
2010 Q4 13,257 3 0 226.3
2010 Q3 12,667 0 0 0.0
2010 Q2 10,742 2 0 186.2
2010 Q1 9,632 0 0 0.0
2009 Q4 7,617 0 0 0.0
2009 Q3 9,799 0 0 0.0
2009 Q2 10,798 1 0 92.6
2009 Q1 11,245 0 0 0.0
2008 Q4 10,353 1 0 96.6
2008 Q3 11,673 0 0 0.0
2008 Q2 11,984 1 0 83.4
2008 Q1 11,748 0 0 0.0
2007 Q4 13,081 0 0 0.0
2007 Q3 15,343 0 0 0.0
2007 Q2 15,696 0 0 0.0
2007 Q1 17,016 0 0 0.0
2006 Q4 17,785 0 0 0.0
2006 Q3 18,212 0 0 0.0
2006 Q2 17,679 0 0 0.0
2006 Q1 17,079 0 0 0.0
2005 Q4 15,873 0 0 0.0
2005 Q3 16,128 0 0 0.0
2005 Q2 16,484 3 0 182.0
2005 Q1 13,639 0 0 0.0
2004 Q4 12,696 1 0 78.8
2004 Q3 14,173 0 0 0.0
2004 Q2 14,699 1 0 68.0
2004 Q1 14,502 0 0 0.0
2003 Q4 14,472 0 0 0.0
2003 Q3 15,188 1 0 65.8
2003 Q2 14,888 0 0 0.0
2003 Q1 13,559 2 0 147.5
2002 Q4 12,973 0 0 0.0
2002 Q3 12,884 0 0 0.0
2002 Q2 14,191 0 0 0.0
2002 Q1 14,850 1 0 67.3
2001 Q4 13,677 0 0 0.0
2001 Q3 14,429 0 0 0.0
2001 Q2 16,616 0 0 0.0
2001 Q1 15,105 0 0 0.0
2000 Q4 14,986 0 0 0.0
2000 Q3 13,782 0 0 0.0
2000 Q2 11,997 0 0 0.0
2000 Q1 14,834 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

48 on file

2019 · 2 incidents

November 4, 2019 CA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
CalMat Co · Over-exertion in lifting objects

Employee felt a pull in lower back when employee placed a steel plate, measuring approx. 16" x 20", onto the cutting table.

July 15, 2019 CA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
CalMat Co · Over-exertion in lifting objects

On 7/15/19, employee was stacking screens on a pallet, stepping from left to right, when they felt their right knee pop to the inside of the leg. The employee was seen at the Company Clinic and diagnosed with a knee sprain, placed on modified duty, and was prescribed physical therapy.

2017 · 1 incident

November 22, 2017 CA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
CalMat Co · Over-exertion (Not Elsewhere Classified)

On 11/22/17, employee received medical treatment and was placed on restricted duty which is being accommodated. The employee slipped, heard a pop in right knee and experienced a right patella dislocation.

2015 · 1 incident

September 9, 2015 CA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
CalMat Co · Struck by powered moving object

On 9/9/15, the employee was taken to Company clinic, placed on restricted duty which was accommodated. Employee while walking in Company parking lot was struck by a co-worker who was operating his personal vehicle. The employee was diagnosed with L-hip buttocks contusion, lumbosacral strain, L-elbow contusion and laceration.

2011 · 1 incident

October 6, 2011 CA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
CalMat Co · Struck by... (Not Elsewhere Classified)

SERVICE TECH WAS TRYING TO BREAK THE BACK BEAD ON A TIRE WITH A COMBINATION BEAD BREAKER HE SAID HE WAS STANDING ON THE SIDE OF THE TIRE BUT AFTER INVESTIGATING HE WAS UNDER THE LOADER NOT ON THE SIDE OF THE LOADER HE PUT PRESSURE TO THE BEAD BREAKER IT CAME LOOSE AND HIT HIM ON THE FOREHEAD HE WAS WEARING HIS HARD HAT AND THAT SAVE HIM FROM SERIOUS INJURY

2010 · 2 incidents

September 10, 2010 CA · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator OTHER
CalMat Co · Unclassified, insufficient data

On 9/10/10 while the employee was loading out waste material, he stated over the radio that he felt faint. After parking the loader at the office, his manager noticed symptoms of faintness and confusion and the employee stated he had blurred vision. The employee was transported by EMT to Sharp Memorial Hospital on a non-occupational basis.

March 30, 2010 CA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator OTHER
CalMat Co · (Not Elsewhere Classified)

On 3/30/10 the employee was in the breakroom to start his lunch break when he called his supervisor to report discomfort in his chest and back. Management summoned EMS which responded. The employee was diagnosed with chest pain (non-specific) by a physician on a non-occupational basis.

2008 · 2 incidents

November 24, 2008 CA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
CalMat Co · Over-exertion in lifting objects

Employee was taken to the Company clinic on 2/9/09 and was placed on restricted duty. The employee states that while placing a screen cloth, weighted at 15 lbs., into the bed of truck, he felt his right shoulder pull (Allegedly). Employee was diagnosed with a right shoulder strain.

August 25, 2008 CA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator DISORDERS (REPEATED TRAUMA)
CalMat Co · (Not Elsewhere Classified)

Employee went to see an audiologist on 8/25/08 who determined that the hearing loss to his right ear is of occupational origin.

2005 · 1 incident

April 11, 2005 CA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
CalMat Co · Contact with hot objects or substances

The employee went to see the company doctor on 4/15/2005 after the injury happened on 4/11/2005 had become irritated, and was returned to full duty. The employee was removing a hose to unplug the pump, and was burned by hot water.

2004 · 1 incident

June 14, 2004 CA · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator SLIP OR FALL OF PERSON
CalMat Co · Fall from machine

Employee went to see Company doctor on 06/14/2004 and was released on restricted duty. Employee was climbing up ladder of loader and slipped twisting his ankle and fracturing his R-heel.

2003 · 1 incident

August 13, 2003 CA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
CalMat Co · Caught in, under or between (Not Elsewhere Classified)

EMPLOYEE WENT TO SEE COMPANY DR ON 8/13/03, WAS PLACED ON RESTRICTED DUTY AND STITCHES WERE APPLIED. WHILE PULLING A CHUNK OF ROCK FROM CONVEYER, LEFT HAND GOT STUCK BETWEEN ROCK AND CONVEYER WHICH CAUSED LACERATION TO LEFT HAND.

2002 · 3 incidents

September 2, 2002 CA · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler SLIP OR FALL OF PERSON
CalMat Co · Fall to lower level, (Not Elsewhere Classified)

INJURY HAPPENED TO AN IRWINDALE HEAVY DUTY SHOP EMPLOYEE AT THE CARROLL CANYON PLANT. EMPLOYEE WENT TO SEE COMPANY PHYSICIAN ON 11/14/02 AND WAS PLACED ON RESTRICTED DUTY. WHILE CHANGING SKIRT BOARD RUBBER AROUND FEEDER AND REPAIRING DIAMOND DECK PLATE, EMPLOYEE FELL THROUGHT HOLE AND STOPPED HIMSELF WITH HIS ELBOWS WHICH CAUSED LATERAL EPICONDYLITIS TO L-ELBOW.

August 8, 2002 CA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
CalMat Co · Struck by... (Not Elsewhere Classified)

EE WENT TO HOSPITAL WERE STITCHES WERE APPLIED AND HE WAS PUT ON RESTRICTED DUTY. CHANGING END COVERS ON LOADER BUCKET, EE WAS STRUCK BY WEDGED WHILE HAMMERING TO REMOVE END COVER.

February 14, 2002 CA · Metal/Non-Metal welder (shop) HANDLING OF MATERIALS
CalMat Co · Struck by falling object

EMPLOYEE WENT TO SEE COMPANY DOCTOR ON 2/15/02 AND WA PLACED ON RESTRICTED DUTY. WHEN CHANGING BUCKET TEETH ON LOADER, A SLIVER OF STEEL BROKE OFF WHILE HAMMERING ON A PIN TO REMOVE BUCKET TO OTH AND THE SLIVER OF STEEL BECAME EMBEDDED IN EMPLOYEE'S CHEST.

2000 · 2 incidents

April 3, 2000 CA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
CalMat Co · Over-exertion (Not Elsewhere Classified)

WHILE CLIMBING ON EQUIPMENT TO REPAIR IT, LEFT KNEE LOCKED UP.

March 14, 2000 CA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDTOOLS (NONPOWERED)
CalMat Co · Fall onto or against objects

NOT REPORTED UNTIL APRIL 6. EE WENT TO SEE DR. ON APRIL 6 AND WAS PLACED ON RESTRICED DUTY. WRENCH SLIPPED OFF BOLT, EE FELL BACKWARD AND DOWN HITTING HIS BACK ON LOWER HAND RAIL.

1999 · 3 incidents

December 20, 1999 CA · Metal/Non-Metal welder (shop) MACHINERY
CalMat Co · Struck by... (Not Elsewhere Classified)

EE WENT TO SEE DR ON 12-20-99 AND WAS PLACED ON MODIFIED DUTY. EE WAS HOLDING A BOLT WITH HAND AND TURNED ON IMPACT AND BOLT SPUN WHILE HOLDING IT WITH BARE HAND.

September 7, 1999 CA · Metal/Non-Metal HANDLING OF MATERIALS
CalMat Co · Contact with hot objects or substances

EMPLOYEE'S LEFT ARM WAS BURNED, WHEN THE RADIATOR CAB WAS KICKED OFF, CAUSING HOT RADIATOR FLUIDTO SPRAY ALL OVER THE PLACE.

July 14, 1999 CA · Metal/Non-Metal mine manager, mine foreman, mine owner MACHINERY
CalMat Co · Struck by... (Not Elsewhere Classified)

GRINDER KICKED BACK, CUTTING ARM.

1997 · 1 incident

June 9, 1997 CA · Metal/Non-Metal cutting machine operator, ripper, universal operator HANDTOOLS (NONPOWERED)
Calmat Company · Over-exertion in wielding or throwing objects

EMPLOYEE WAS SWINGING A SLEDGE HAMMER AND FELT A SHARP PAIN IN HIS LOW BACK AREA.

1996 · 1 incident

August 30, 1996 CA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Calmat Company · Caught in, under or between a moving and a stationary object

EMPLOYEE WAS TRYING TO REMOVE SET OF ROLLERS WHEN THE ROLLERS TIPPED OVER SMASHING FINGER BETWEEN ROLLERS AND CONVEYOR FRAME.

1995 · 3 incidents

November 22, 1995 CA · Metal/Non-Metal electrician, lineman OTHER
Calmat Company · Absorption of radiations, caustics, toxic and noxious substances

WHILE EMPLOYEE WAS CHECKIGN A SWITCH GEAR, HE WAS BITTEN BY A SPIDER. LATER ON THAT NIGT HIS ARM SWELLED UP AND HE SOUGHT MEDICAL ATTENTION. HE DID NOT NOTIFY US OF THIS INCIDENT UTIL 11-27- 95.

September 15, 1995 CA · Metal/Non-Metal fireman - locomotive, railroad clam operator, timekeeper, yard engine operator HANDTOOLS (NONPOWERED)
Calmat Company · Struck by... (Not Elsewhere Classified)

EE WAS USING A HAMMER TO LOOSEN NUT ON BOLTS. WHILE HITTING WRENCH WITH THE HAMMER, HE STRAINED HIS RIGHT WRIST AND THUMB.

April 3, 1995 CA · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer MACHINERY
Calmat Company · Over-exertion (Not Elsewhere Classified)

GRADUAL ONSET OF BACK INJURY FROM OPERATING A DOZER & OTHER HEAVY EQUIPMENT OVER A PERIOD OF 26 YEARS.

1993 · 1 incident

July 7, 1993 CA · Metal/Non-Metal prep plant foreman, supervisor, mill plant supervisor, kiln supervisor SLIP OR FALL OF PERSON
Calmat Company · Struck against stationary object

WHILE RAISING CATWALK OVER CRUSHER, ELECTRICAL CORD CAUGHT ON CONVEYOR - EMPLOYEE STEPPED ON RAIL TO UNTANGLE CORD. WHEN HE STEPPED DOWN HE HELD ONTO AN AIR LINE FOR SUPPORT, PIPE BROKE AND EM PLOYEE FELL BACK STRIKING HAND ON CRUSHER.

1991 · 1 incident

November 4, 1991 CA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator POWERED HAULAGE
Calmat Company · Struck by powered moving object

AS EMPLOYEE WAS DIRECTING TRAFFIC IN THE PLANT FOR A CUSTOMER TO BE LOADED, THE CUSTOMER DID NOT WAIT FOR CALMAT'S EMPLOYEE TO WAIVE HIM ON. THE CUSTOMER SAW AN OPENING AND STARTED ON HIS OWN HITTING THE EMPLOYEE WITH HIS TRUCK.

1990 · 4 incidents

August 27, 1990 CA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Calmat Company · Struck by flying object

DRIVING PLANT TRUCK WHEN FOREIGN SUBSTANCE BLEW INTO RIGHT EYE.

August 4, 1990 CA · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer OTHER
Calmat Company · Absorption of radiations, caustics, toxic and noxious substances

EMPLOYEE WAS MOVING A TRANSFORMER WHEN HE DISRUPTED A BEE HIVE.

April 16, 1990 CA · Metal/Non-Metal SLIP OR FALL OF PERSON
Calmat Company · Fall to lower level, (Not Elsewhere Classified)

NON-EMPLOYEE, DATE OF BIRTH 7-28-75, WAS FOUND AT THE BOTTOM OF A PIT AT THE CARROLL CANYON PLANT. HE WAS DISCOVERED BY A GROUP OF BOYS IN THE AFTERNOON OF 4-16-90. FIRST REPORTS INDICATE HE H AS MULTIPLE INJURIES. NO OTHER INFORMATION IS AVAILABLE AT THIS TIME.

March 15, 1990 CA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator SLIP OR FALL OF PERSON
Calmat Company · Fall from machine

EMPL WAS INSIDE HOPPER FIXING SCREEN WHEN OFF SIDE OF HOPPER & JAMMED LEFT ANKLE.

1989 · 4 incidents

November 6, 1989 CA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Calmat Company · Over-exertion in lifting objects

EMP WAS CARRYING A PUMP UP A STEEP INCLINE WHEN HOSE CAUGHT ON A PIECE METAL AND CAUSED EMP BODY TO TWIST.

October 23, 1989 CA · Metal/Non-Metal ledgeman/hand, quarry man HANDLING OF MATERIALS
Calmat Company · Over-exertion (Not Elsewhere Classified)

CLIMBING LADDER TO CATWALK TURNED AND TWISTED ELBOW.

March 17, 1989 CA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Calmat Company · Over-exertion in lifting objects

WHILE LIFTING SCREENS INTO LOADER BUCKET EMPL STRAINED BACK.

February 2, 1989 CA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator STEPPING OR KNEELING ON OBJECT
Calmat Company · Struck against stationary object

AFTER CLEANING TRANSFER BOX,EMPL CLIMBED OUT OF BOX AND STEPPED DOWN ONTO CATWALK STEPPED ON ROUNDISH ROCK,SLIPPED AND TWISTED FOOT.INJ REPORTED 2-2-89 ALTHOUGH EMPL CLAIMS HAPPENED 1987.

1988 · 4 incidents

December 14, 1988 CA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Calmat Company · Struck against a moving object

EMPL ALLEDGES THAT HAUL ROAD IS SO BAD THAT STRAIN TO SEVERAL PARTS OF HER BODY IS CAUSED BY BUMPS IN ROAD.

October 10, 1988 CA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Calmat Company · Struck against a moving object

WHILE DRIVING PIT TRUCK ON ROUGH ROAD BOUNCING UP & DOWN STRAINED NECK & SPINE

May 18, 1988 CA · Metal/Non-Metal welder (shop) HANDTOOLS (NONPOWERED)
Calmat Company · Struck by... (Not Elsewhere Classified)

WHILE USING A PRY BAR TO LINE UP A BELLY PAN ON A D8L, PRY BAR SLIPPED OFF AND HIT EMPLOYEE ON THE #8 TOOTH.

March 26, 1988 CA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
Calmat Company · Struck by flying object

WHILE HOLDING A BRASS PUNCH WITH VISE GRIPS, BRASS PUNCH CAME LOOSE FROM GRIPS AND HIT EMP. IN THE MOUTH.

1987 · 3 incidents

December 9, 1987 CA · Metal/Non-Metal tipple/top lander/skip dumper operator, binman, topman SLIP OR FALL OF PERSON
Calmat Company · Fall to lower level, (Not Elsewhere Classified)

EMPLOYEE PUSHED3ON THE BAR WITH HIS RIGHT FOOT. THE BAR SLIPPED AND EMPLOYEE LOST HIS BALANCE AND FELL ABOUT 15 FEET ONTO HIS BACK.

September 9, 1987 CA · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer OTHER
Calmat Company · Struck by flying object

EMPLOYEE IS AN 9QUIPMENT OPERATOR WHO WAS WORKING IN A DUSTY AREA AND THE WIND WAS BLOWING STRONG AND BLEW SUBSTANCE INTO EMPLOYEE'S EYE.

July 20, 1987 CA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator MACHINERY
Calmat Company · Struck by... (Not Elsewhere Classified)

EMPLOYEE WAS DI9ECTING THE LOADER,CLEANING OUT FEEDER.WAS ABOUT 5FT.IN FRONT OF LOADER,AS STABBLER CLEARED THE TOP OF THE FEEDER,IT SPRANG FORWARD AND STRUCK EMPLOYEE IN THE CHEST.

1986 · 2 incidents

November 19, 1986 CA · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Calmat Company · Struck against stationary object

HANDLING ROCK L2G TIPS, EMPLOYEE TURNED AROUND AND HIT ELBOW ON A ROCK LOG TIP THAT WAS INSTALLED.

February 12, 1986 CA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Calmat Company · Caught in, under or between a moving and a stationary object

DRIVING PIT TRU7K #6967 GOING BACK TO THE P IT TURNED TRUCK ON ITS LEFT SIDE LEFT LEG WAS OUT THE DOOR AND UNDER THE CAB

1985 · 4 incidents

December 5, 1985 CA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Calmat Company · Fall onto or against objects

WHILE HE WAS LI0TING & TIPING SOCKET LIER HIS FEET SLIPPED BECAUSE OF THE RAIN HE SLIPPED & FELL CAUSING HIM TO LAND ON TOP OF THE SOCKET LINER & IN DOING SO HE RECEIVED A LACERATION TO NOSE BRIDGE & EYEBRO4

August 26, 1985 CA · Metal/Non-Metal backhoe operator, trackhoe operator STEPPING OR KNEELING ON OBJECT
Calmat Company · Struck against stationary object

HE HAD FINISHED WELDING AND STARTED TO WRAP UP AND STEPPED OFF THE SHOVEL BUCKET ONTO A ROCK AND HIS ANKLE TWISTED OVER

July 9, 1985 CA · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
Calmat Company · Over-exertion in wielding or throwing objects

HAD BEEN SHOVELING MATERIAL UNDER THE TUNNEL CONVEYOR BELT FOR ABOUT AN HOUR WHEN HE CAME UP WITH S SHOVEL FULL OF MATERIAL AND WENT TO THROW IT ON THE BELT AND THEN FELT PAIN IN LOWER BACK F FOR A FEW MINUTES

January 30, 1985 CA · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Calmat Company · Over-exertion (Not Elsewhere Classified)

WHILE HELPING TURN CUTTING TEETH ON 150B SHOVEL STRAINED BACK PICKING UP AND TURNING CUTTING TEETH OVER