Mining Incidents

CUTLER QUARRY: 41 MSHA citations Metal/Non-Metal

Controlled by Cemex S A
Miami, Miami-Dade County, FL  ·  Abandoned
MSHA Mine ID: 0800926

CUTLER QUARRY has $7K in proposed MSHA penalties and $60 outstanding across 1 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at CUTLER QUARRY.

Fatalities
0
Total incidents
8
Years on record
1988–1990
Latest incident
Mar 1990
Compliance record
MSHA citations since 2001
41
citations
18
significant & substantial
$6,574
proposed penalties
$6,514
paid to date
99% of proposed penalties paid to date, a $60 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
20
inspections on record
311
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 311 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

CUTLER QUARRY has $7K in proposed MSHA penalties and $60 outstanding across 1 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$7K
proposed penalties
$7K
current assessed
$7K
paid to date
$60
outstanding
40 assessments are final orders; 1 contested dockets.
Of $2K in penalties contested before the Commission, $2K was upheld in final decisions.
As of the most recent assessment on 2005-08-23.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
45.0%
significant & substantial
10.0%
high negligence or reckless
45.0%
reasonably likely or greater
87.5%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 0.0% low, 90.0% moderate, 10.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
SE 2004-94-M Dismissal Feldman 2004 $2K → $2K
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2004-06-17, 22 years ago
14
samples
0
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg14
Show the individual readings (14)
Date Contaminant Concentration Limit Conc / limit Occupation
2004-06-17 Respirable dust, <.1mg 0 Scale Man
2004-06-17 Respirable dust, <.1mg 0 Laborer, Bullgang
2004-06-17 Respirable dust, <.1mg 0 Front-end Loader Operator
2004-06-17 Respirable dust, <.1mg 0 Bulldozer Operator
2003-05-21 Respirable dust, <.1mg 0 Front-end Loader Operator
2003-05-21 Respirable dust, <.1mg 0 Front-end Loader Operator
2003-05-21 Respirable dust, <.1mg 0 Dragline Operator
2003-05-21 Respirable dust, <.1mg 0 Front-end Loader Operator
2003-05-21 Respirable dust, <.1mg 0 Front-end Loader Operator
2002-01-16 Respirable dust, <.1mg 0 Dragline Operator
2002-01-16 Respirable dust, <.1mg 0 Diamond Drill Operator
2002-01-16 Respirable dust, <.1mg 0 Oiler, Greaser
2002-01-16 Respirable dust, <.1mg 0 Front-end Loader Operator
2002-01-16 Respirable dust, <.1mg 0 Drill Helper
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

CUTLER QUARRY recorded 0.00 reportable injury cases per 100 full-time workers in 2005.

Injury rate, 2005
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US metal and nonmetal mining average was 3.76 and the all-US-mining average was 4.21 cases per 100 workers.
In Florida, metal and nonmetal mining averaged 3.02 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2005 * 0.00 0.00 0.000
2004 * 0.00 0.00 0.000
2003 * 0.00 0.00 0.000
2002 * 0.00 0.00 0.000
2001 * 0.00 0.00 0.000
2000 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Florida Rock & Sand Company Inc 1979 to 1999
  2. Florida Rock & Sand 1999 to 2002
  3. RMC South Florida, Inc 2002 to 2005
  4. RMC Florida Group LTD 2006 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2007 1
2006 4
2005 11
2004 14
2003 18
2002 18
2001 16
2000 15
Source: MSHA quarterly employment and production, updated weekly.

CUTLER QUARRY sits in Miami-Dade County, Florida, where the Census mining category is 0.0% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Miami-Dade County, Florida · Population 2,685,296
0.0%
Mining share of county employment
$68,694
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2007 Q4 0 0 0
2007 Q3 0 0 0
2007 Q2 705 0 0 0.0
2007 Q1 720 0 0 0.0
2006 Q4 865 0 0 0.0
2006 Q3 986 0 0 0.0
2006 Q2 1,516 0 0 0.0
2006 Q1 3,919 0 0 0.0
Show 24 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2005 Q4 4,561 0 0 0.0
2005 Q3 4,624 0 0 0.0
2005 Q2 5,435 0 0 0.0
2005 Q1 6,062 0 0 0.0
2004 Q4 6,664 2 1 300.1
2004 Q3 6,154 0 0 0.0
2004 Q2 8,742 0 0 0.0
2004 Q1 10,380 0 0 0.0
2003 Q4 11,948 3 2 251.1
2003 Q3 11,425 0 0 0.0
2003 Q2 12,317 4 2 324.8
2003 Q1 11,988 0 0 0.0
2002 Q4 11,563 7 3 605.4
2002 Q3 11,220 0 0 0.0
2002 Q2 10,763 0 0 0.0
2002 Q1 10,001 3 0 300.0
2001 Q4 10,051 0 0 0.0
2001 Q3 10,633 0 0 0.0
2001 Q2 9,681 0 0 0.0
2001 Q1 10,633 10 6 940.5
2000 Q4 10,420 0 0 0.0
2000 Q3 10,796 0 0 0.0
2000 Q2 11,634 0 0 0.0
2000 Q1 10,148 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

8 on file

1990 · 2 incidents

1989 · 3 incidents

July 8, 1989 FL · Metal/Non-Metal crane operator, mobile equipment operator (meo), dragline operator, dropball operator, rigger HANDLING OF MATERIALS
Florida Rock & Sand Company Inc · Contact with hot objects or substances

WHILE MAKING VISUAL INSPECTION OF DRAGLINE,EMPL TURNED AND PLACED HAND & RIGHT FOREARM ON MUFFLER.3RD DEG BURN TO PALM OF RIGHT HAND.

May 19, 1989 FL · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman MACHINERY
Florida Rock & Sand Company Inc · Struck by flying object

DIRT GOT ON L EYE WHILE HELPING WELDER EMPL HAD GLASSES ON BUT NOT SAFETY GOGGLES

February 20, 1989 FL · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler OTHER
Florida Rock & Sand Company Inc · Struck by flying object

WHILE EMPL WAS WORKING ON DRAGLINE, RUST WAS BLOWN INTO CONRER OF RIGHT EYE. HE WAS WEARING SAFETY GLASSES BUT HIGH WINDS BLEW RUST PAST THEM.

1988 · 3 incidents

November 2, 1988 FL · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler HANDLING OF MATERIALS
Florida Rock & Sand Company Inc · Caught in, under or between (Not Elsewhere Classified)

EMPLOYEE ALLOWED INDEX FINGER OF RIGHT HAND TO BE PINCHED IN HOOK ROLLER.

October 20, 1988 FL · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Florida Rock & Sand Company Inc · Over-exertion in lifting objects

WHEN EMPLOYEE WAS PUTTING WEAR PLATE IN ROCK CHUTE ON UNDER WOBBLER BELT, HE TWISTED HIS BACK. HE WAS NOT AWARE OF ANY PAIN UNTIL THE NEXT DAY.

August 18, 1988 FL · Metal/Non-Metal outside foreman, leadman HANDLING OF MATERIALS
Florida Rock & Sand Company Inc · Struck against stationary object

EMP WAS INSTALLING A MOTOR IN PRIMARY CRUSHER AREA WAS CONFINED WITH A STEEL BEAM OVERHEAD. EMP STOD UP QUICKLY GRAZING THE SIDE OF HIS FACE ON THE STEEL BEAM.