citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 338 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
DAVENPORT SHOPS has $784 in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$784
proposed penalties
$784
current assessed
$784
paid to date
$0
outstanding
9 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2007-11-26.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Metal and nonmetal contaminants (personal samples)
ⓘMany samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2006-06-15, 20 years ago
29%
of limit-tested samples over the exposure limit
13
samples
7
limit-tested
Most sampled contaminants
Quartz, respirable, >1% Qtz52 over
Respirable dust, <.1mg6
Nuisance dust, respirable, <1% Qtz2
Show the individual readings (13)
Date
Contaminant
Concentration
Limit
Conc / limit
Occupation
2005-05-18
Quartz, respirable, >1% Qtz
0.38
0.3
1.27
Mechanic
2005-05-18
Quartz, respirable, >1% Qtz
0.45
0.34
1.32
Mechanic
2006-06-15
Respirable dust, <.1mg
0
Mechanic
2005-08-03
Respirable dust, <.1mg
0
Mechanic
2005-08-03
Quartz, respirable, >1% Qtz
0.35
2.1
0.17
Mechanic
2005-05-18
Respirable dust, <.1mg
0
Iron Worker
2005-05-18
Quartz, respirable, >1% Qtz
0.57
2.86
0.20
Iron Worker
2005-05-18
Respirable dust, <.1mg
0
Electrician
2003-12-17
Nuisance dust, respirable, <1% Qtz
1.12
10
0.11
Welder, etc.
2003-12-17
Nuisance dust, respirable, <1% Qtz
0.16
10
0.02
Mechanic
2003-12-17
Respirable dust, <.1mg
0
Welder, etc.
2003-12-17
Respirable dust, <.1mg
0
Mechanic
2003-12-17
Quartz, respirable, >1% Qtz
0.52
3.16
0.16
Welder, etc.
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
DAVENPORT SHOPS recorded 8.20 reportable injury cases per 100 full-time workers in 2006.
Injury rate, 2006
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
8.20
total case rate
0.00
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 3.41 and the all-US-mining average was 3.91 cases per 100 workers.
In Florida, metal and nonmetal mining averaged 2.78 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year
total case rate
days-away
fatal
2006 *
8.20
0.00
0.000
2005 *
0.00
0.00
0.000
2004 *
7.27
0.00
0.000
2003 *
0.00
0.00
0.000
2002 *
12.51
6.25
0.000
2001 *
25.43
0.00
0.000
2000 *
4.67
0.00
0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year
Employees
2007
15
2006
21
2005
21
2004
25
2003
16
2002
15
2001
14
2000
18
Source: MSHA quarterly employment and production, updated weekly.
DAVENPORT SHOPS sits in Polk County, Florida, where the Census mining category is 0.1% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Polk County, Florida · Population 760,961
0.1%
Mining share of county employment
$63,644
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2007 Q3
12,756
0
0
0.0
2007 Q2
6,167
0
0
0.0
2007 Q1
6,355
0
0
0.0
2006 Q4
6,653
0
0
0.0
2006 Q3
17,728
0
0
0.0
2006 Q2
7,457
0
0
0.0
2006 Q1
16,938
0
0
0.0
2005 Q4
13,706
0
0
0.0
Show 23 earlier quartersHide earlier quarters
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2005 Q3
10,545
0
0
0.0
2005 Q2
10,401
2
2
192.3
2005 Q1
13,013
0
0
0.0
2004 Q4
16,561
0
0
0.0
2004 Q3
15,703
0
0
0.0
2004 Q2
15,481
0
0
0.0
2004 Q1
7,269
0
0
0.0
2003 Q4
8,455
0
0
0.0
2003 Q3
8,954
0
0
0.0
2003 Q2
9,558
0
0
0.0
2003 Q1
10,331
0
0
0.0
2002 Q4
7,955
1
0
125.7
2002 Q3
7,046
0
0
0.0
2002 Q2
7,549
0
0
0.0
2002 Q1
9,430
0
0
0.0
2001 Q4
9,866
0
0
0.0
2001 Q3
9,815
0
0
0.0
2001 Q2
9,695
2
0
206.3
2001 Q1
9,951
2
0
201.0
2000 Q4
9,422
0
0
0.0
2000 Q3
9,844
0
0
0.0
2000 Q2
8,752
0
0
0.0
2000 Q1
14,814
1
0
67.5
No fatalities recorded at this mine.
Reportable incidents
18 on file
2006 · 2 incidents
December 12, 2006FL · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
Employee was moving an aparatus from a top shelf in a storage container. An arm of the aparatus swung around and hit him in the face fracturing his nose
Employee was removing driveshaft from 972 loader. Employee was striking driveshaft T with hammer to remove from yoke. At the area of impact on the bearing cap a piece of metal broke free from the cap and punctured right calf of employee. Size of metal was approximately eigth of an inch in diameter.
2004 · 2 incidents
November 11, 2004FL · Metal/Non-Metalbelt foreman, maintenance foreman, maintenance supervisorHANDLING OF MATERIALS
EE was changing a scraper blade on the belt scraper for the plant blending belt. While attempting to remove the shaft that holds the scraper, his hand was pinched between the shaft & the chute above the shaft. He suffered a small cut & bruising from the accident.
Ee was sitting on the deck of the dredge welding some pipe. While sitting, he turned to pick up an 8" piece of pipe to weld. He felt a muscle pull in his back but did not feel it bothered him. He reported to supervisor & noted on First Aid form. Two days later, the pain had increased & he felt he needed treatment for the pulled muscle.
2002 · 2 incidents
September 30, 2002FL · Metal/Non-Metalwelder (shop)MACHINERY
EE REC'D LACERATION TO THE LEFT INDEX FINGER WHILE PUTTING A PUMP THROAT PIECE INSIDE A FACE PLATE
September 19, 2001FL · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techSLIP OR FALL OF PERSON
EMPLOYEE STRAINED HIS LEFT SHOULDER WHILE PICKING UP A LADDER.
1999 · 1 incident
January 15, 1999FL · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techSLIP OR FALL OF PERSON
November 5, 1997FL · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS