Mining Incidents

Dig In Mining: 15 MSHA citations Metal/Non-Metal

Dig In Mining, LLC · Surface
Florala, Covington County, AL  ·  Active
MSHA Mine ID: 0103565

Dig In Mining has $2K in proposed MSHA penalties and $528 outstanding across 1 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Dig In Mining.

Fatalities
0
Total incidents
1
Years on record
2024
Latest incident
Jul 2024
Compliance record
MSHA citations since 2022
15
citations
5
significant & substantial
$2,354
proposed penalties
$1,826
paid to date
78% of proposed penalties paid to date, a $528 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2022
9
inspections on record
133
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 133 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Dig In Mining has $2K in proposed MSHA penalties and $528 outstanding across 1 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$2K
proposed penalties
$2K
current assessed
$2K
paid to date
$528
outstanding
11 assessments are final orders; 1 contested dockets.
Of $151 in penalties contested before the Commission, $151 was upheld in final decisions.
As of the most recent assessment on 2026-07-29.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
33.3%
significant & substantial
6.7%
high negligence or reckless
33.3%
reasonably likely or greater
33.3%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 40.0% low, 53.3% moderate, 6.7% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
1 citations taken to the federal commission · 7% of citations on record
  • Settled 1 · 100%
0%
Penalty reduction in decided contests
$151 proposed, $151 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2025-03-26.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
SE 2025-0079 Settlement Paez 2025 $151 → $151
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2023-11-02
0%
of limit-tested samples over the exposure limit
4
samples
2
limit-tested
Most sampled contaminants
  • Nuisance dust, respirable, <1% Qtz2
  • Respirable dust, <.1mg2
Show the individual readings (4)
Date Contaminant Concentration Limit Conc / limit Occupation
2023-11-02 Nuisance dust, respirable, <1% Qtz 0.18 10 0.02 Backhoe Operator
2023-11-02 Respirable dust, <.1mg 0 Mechanic
2023-11-02 Nuisance dust, respirable, <1% Qtz 0.13 10 0.01 Oiler, Greaser
2023-11-02 Respirable dust, <.1mg 0 Crusher Oper/Worker
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Dig In Mining recorded 0.00 reportable injury cases per 100 full-time workers in 2025.

Injury rate, 2025
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In Alabama, metal and nonmetal mining averaged 1.52 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2025 * 0.00 0.00 0.000
2024 1.97 1.97 0.000
2023 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Dig In Mining, LLC 2022 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 20
2025 29
2024 34
2023 28
2022 22
Source: MSHA quarterly employment and production, updated weekly.

Dig In Mining sits in Covington County, Alabama, where the Census mining category is 1.6% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Covington County, Alabama · Population 37,647
1.6%
Mining share of county employment
$50,886
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 11,532 0 0 0.0
2026 Q1 11,412 1 0 87.6
2025 Q4 20,643 0 0 0.0
2025 Q3 15,920 0 0 0.0
2025 Q2 11,717 1 0 85.3
2025 Q1 8,694 3 0 345.1
2024 Q4 11,611 0 0 0.0
2024 Q3 14,932 0 0 0.0
Show 8 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 57,500 0 0 0.0
2024 Q1 17,283 0 0 0.0
2023 Q4 15,830 2 1 126.3
2023 Q3 14,600 1 1 68.5
2023 Q2 11,350 0 0 0.0
2023 Q1 12,083 0 0 0.0
2022 Q4 10,786 1 1 92.7
2022 Q3 5,785 3 1 518.6
No fatalities recorded at this mine.

Reportable incidents

1 on file

2024 · 1 incident

July 30, 2024 AL · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech SLIP OR FALL OF PERSON
Dig In Mining, LLC · Fall onto or against objects

EE was climbing down an affixed steel ladder, when EE got to the bottom EE slipped & gashed EE's arm on an improperly exposed bolt