MSHA record for Dolomite Quarry & Mill (mine ID 4502126). Fatalities, non-fatal incidents grouped by year, current operator and controller, and mine context.
Email me when a new MSHA incident is filed at Dolomite Quarry & Mill.
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2003 Q1 | 3,055 | 0 | 0 | 0.0 |
| 2002 Q4 | 3,442 | 0 | 0 | 0.0 |
| 2002 Q3 | 3,156 | 0 | 0 | 0.0 |
| 2002 Q2 | 3,534 | 0 | 0 | 0.0 |
| 2002 Q1 | 3,090 | 0 | 0 | 0.0 |
| 2001 Q4 | 640 | 0 | 0 | 0.0 |
| 2001 Q3 | 8,202 | 0 | 0 | 0.0 |
| 2001 Q2 | 9,736 | 0 | 0 | 0.0 |
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2001 Q1 | 8,301 | 0 | 0 | 0.0 |
| 2000 Q4 | 8,764 | 0 | 0 | 0.0 |
| 2000 Q3 | 8,354 | 0 | 0 | 0.0 |
| 2000 Q2 | 9,856 | 0 | 0 | 0.0 |
| 2000 Q1 | 9,521 | 0 | 0 | 0.0 |
EXPOSURE TO NOISE WHILE SURFACE MINING & CRUSHING DOLOMITE
EXPOSURE TO NOISE WHILE SURFACE MINING & CRUSHING DOLOMITE
AN EE WAS OPERATING KOMATSU FRT END LDR WITH A BUCKET DESIGNED FOR STEMING HOLES. THE BUCKET WASFULL OF MATERIAL (APPROX 800LBS) AND THE LOADER WAS FULLY ARTICULATED TO THE LEFT DURING THE APP ROACH TO THE HOLE HE DROVE THE RIGHT FRT WHEEL UPON A PILE OF ROCKS (APPROX 1') CAUSING THE REAR WHEELS TO LIFT OFF THE GRD. THE LOADER SPRIRALED DOWN OVER THE 20' HIGHWALL & LANDED ON THE LE
KNEELING ON FLOOR TO CHANGE SOCKET ON AIR IMPACT WRENCH. WHILE INSTALLING THE KEEPER PIN AND O RING THE TRIGGER MADE CONTACT WITH THE FLOOR CAUSING THE WRENCE TO ENGAGE TURN PIN. THE PIN WENT INTO THE EE'S PALM BEFORE HE COULD LET GO, RESULTING IN A LACERATION TO THE LEFT PALM.
EXPOSURE TO NOISE WHILE SURFACE MINING AND CRUSHING DOLOMITE.
EXPOSURE TO NOISE WHILE SURFACE MINING AND CURSHING.
THE WEST SIDE OF THE HAULROAD GOING TO THE QUARRY WASTE DUMP [OVER BURDEN] SLID APPROX 100' INTOANOTHER DUMP AREA USED FOR SLAG WAST. THERE WAS NO EQUIPMENT DAMAGE OR PERSONAL INJURY IN THIS E VENT. THE MSHA COEURD'ALENE OFFICE WAS NOTIFIED MONDAY 11/11 & WAS INVESTIGATED 11/15. THE SLIEDIS BELIEVED TO HAVE HAPPENED BY EXCESS WATER CONDITIONS [RAIN, SNOW MELT, IRRAGATING & WET CLAY
EMPLOYEE WAS WELDING APPROX. 5 FEET FROM ANOTHER PERSON WHO WAS WELDING ALSO. THROUGH INVESTIGATING THE INCIDENT IT APPEARS THAT THE ARC FROM THE OTHER WELDER HAD EITHER REFLECTED FROM THE MET TAL OR EMPLOYEE HAD CAUGHT THE ARC FROM BEHIND &AND REFLECTED OF THE LENS INSIDE THE HELMET CAUSING ENOUGH LIGHT TO GO INSIDE TO BURN HIS EYES. HE DID NOT HAVE ANY PROBLEMS UNTIL THAT EVENING
INJURED WAS UNLOADING A PROPANE BOTTLE FROM HIS TRUCK WHILE TRAVELING FROM TRUCK TO FILL LOCATION HE SLIPPED AND FELL. IT WAS RAINY, THERE WAS WET ICY SURFACE. ALSO THE SAND TRUCK WAS BROKEN DOWN UNDER REPAIR.
EE WAS IN THE PROCESS OF LOADING SHOT & FELT A SHARP BURNING PAIN IN THE LEFT GROIN. EE WAS SHOVELING & BENDING OVER TO PPICK UP BLASTING CAPS &POWDER. EE SAW PHYSICIAN & IS TAKING ANTI-INFLAM MATORY & ANTIBIOTIC MEDICATION.
EE WAS USING A THREAD TAP TO THREAD A HOLE IN A STEEL PLATE. THE TAP BROKE & THE EE'S HAND CONTACTED THE BROKEN TAP CAUSING A LACERATION TO THE HAND. THE EE WAS NOT USING THE T HANDLE FOR THE TAP & WAS NOT USING CUTTING OIL. THE LACERATION REQUIRED 3 SUTURES.
OPERATING DRILL & THE OPERATOR WOULD LAY HIS ELBOW ON DOOR OF THE CAB WILE SITTING IN SEAT. THE EDGE OF THE DOOR WHERE EMPLOYEE WAS RESTING ELBOW WAS NOT PADDED & THE VIBRATION CAUSED BURSITIS WITH AN INFECTION.
WHILE TRYING TO START A PUMP WITH A PULL ROPE TYPE STARTER THE EMPLOYEE FELT A PULL TO HIS SHOULDER. THE STARTED HAD TO BE PULLED SEVERAL TIMES, BUT THERE WAS NO PROBLEM ENCOUNTERED WHILE PULL ING ON THE STARTER.
EXPOSURE TO NOISE WHILE SURFACE MING AND CURSHINF DOLOMITE.
EXPOSURE TO NOISE WHILE SURFACE MINING AND CRUSHING DOLOMITE.
EXPOSURE TO NOISE WHILE SURFACE MINING AND CRUSHING DOLOMITE.
EXPOSURE TO NOISE WHILE SURFACE MINING AND CRUSHING DOLOMITE.
EXPOSURE TO NOISE WHILE SURFACE MINING AND CRUSHING DOLOITE.
EXPOSURE TO NOISE WHILE SURFACE MINING AND CRUSHING DOLOMITE.
EXPOSURE TO NOISE WHILE SURFACE MINING AND CRUSHING DOLOMITE.
EXPOSURE TO NOISE WHILE SURFACE MINING AND CRUSHING DOLOMITE.
EXPOSURE TO NOISE WHILE SURFACE MINING AND CRUSHING DOLOMITE.
EXPOSURE TO NOISE WHILE SURFACE MINING AND CRUSHING DOLOMITE.
SHOVEL OPERATOR WAS WALKING ACROSS THE PIT FLOOR, HE STEPPED OVER A MUD PADDLE AND TWISTED HIS KNEE.
EMPL ENTERED WEST END OF PINES SCREEN TO HELP CHANGE SCREENS. EMPL HAD SQUATTED DOWN UPON STANDING UP STRUCK HEAD ON STRUCTURE ABOVE.
EMPLOYEE WAS FALLING LIMBING AND CUTTING TREE LOGS TO 16' LENGTHS.AS HE CUT THE TOP OFF ONE LOG THE SAW HIT AN OBJECT KICKING THE SAW BACK AND INTO HIS ANKLE.THE EMPLOYEE WAS WORKING ON A HILL SLOPE OF APPROXIMATLEY 25%GRADE WITH LIMBS AND OTHER DEBRIS SCATTERED ON THE GROUND.
THUMB WAS CAUGH7 IN DOOR JAMWHEN A LOSING DOOR OF BACKHOE.
EMP PICKED UP A3GREASE UNIT TO SET IT ON A CONVEYOR. THE UNIT CAUGHT ON HIS CLOTHING AS HE LIFTED IT PUTTING HIM IN AWKWARD POSITION. AD A RESULT HE SUSTAINED A BACK INJURY STRAIN
EMPL WASHING SL5G DUST OFF DOZER IN PROCESS HE SLIPPED AND FELL HITTING SWING FRAME OF CAT.
WHEN RELEASING 7HE PARKING BRAKE ON THE QUARRY BUS THE BRAKES FAILED THE BUS KILLED FORWARD BUMPING THE FENDER OF A POWDER TRUCK OWNED AND OPERATED BY ORIARD POWDER CO OF DEERPART. INVESTIGATI ION REVEALED TH5T A STEEL BRAKE LINE HAD RUPTURED DAMAGE TO BOTH VECHICLE ARE ESTMATED AT LESS THAN 300.00 DOLLARS.
THE OPERATOR WAS RECLAIMING CRUSHED ROCK FROM THE NORTH STOCKPILE THAT WAS IN CLOSE PROXIMITY TO A WWP POWER POLE DURING THE OPERATION SHE BACKED INTO THE POLE SHEARING IT OFF CREATING A MAJOR POWER OUTAGE THE CAUSE OF THE ACCIDENT WAS OPERATOR ERROR CONTRIBUTING FACTORS WERE THE NORTH STOCKPILE WAS FULL AND VERY NEAR THE POWER POLE NOBARRICADES AROUND POLE PAINT ON POLE WAS FADED
EMPL ASSUMED TIGHT AWKWARD POSITION BETWEEN SCREEN DECK AND ECCENTRIC DRIVE ON 302 CRUSHER TO ENABLE A REPAIR TO THE SCREEN.
EMPL COMPLAINED OF EYE IRRITATIN AT SHIFT END FOLLOWING REASSEMBLY OF CONE CRUSHER.FOREIGN OBJECT LODGED IN EYE AS A RESULT OF USING AIR IMPACT HAMMERS DURING ASSEMBLY.
INSTALLING HOPPER SIDED FOR NEW BUNKER FOR RUNNING QUARTZITE FINES USING OVERHEAD CRANE.10\ X 8\ X 3/8\\ SHEETS OF STEEL VERTICALLY POSITIONED TO FORM SIDES.APPLYING SECOND PASS OF TEMP WELDS TO HOLD STRUCKURE IN PLACE-SHEET FELL SQUEEZING HIM BETWEEN SHEET AND SIDE OF HOPPER.
WORKING BENEATH TILT-TOP TRAILER ATTEMPTING TO REPAIR FAULTY ELECTRICAL WIRING.USING KNIFE TO REMOVE PLASTIC WIRE CONNECTORS WHEN KNIFE SLIPPED CUTTING FINGER.
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.