Mining Incidents

DTE Utah Synfuels LLC: 6 MSHA citations Coal

DTE Utah Synfuels LLC · Facility
Controlled by DTE Energy Company
Price, Carbon County, UT  ·  Abandoned
MSHA Mine ID: 4202238

DTE Utah Synfuels LLC has $411 in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at DTE Utah Synfuels LLC.

Fatalities
0
Total incidents
1
Years on record
2006
Latest incident
Feb 2006
Compliance record
MSHA citations since 2004
6
citations
2
significant & substantial
$411
proposed penalties
$411
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2001
25
inspections on record
280
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 280 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

DTE Utah Synfuels LLC has $411 in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$411
proposed penalties
$411
current assessed
$411
paid to date
$0
outstanding
6 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2007-04-12.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
33.3%
significant & substantial
0.0%
high negligence or reckless
33.3%
reasonably likely or greater
16.7%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 0.0% low, 100.0% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.

MSHA sampling at DTE Utah Synfuels LLC shows 100% of 41 respirable coal dust samples met the 1.5 mg/m3 standard.

Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2007-04-13, 19 years ago
100%
within 1.5 mg/m3
41
samples
0.73
dust max (mg/m3)
41 samples taken by MSHA inspectors, 0 by the operator.
Most-sampled occupations
  • HIGHLIFT OPERATOR/FRONT END LOADER9
  • SCOOP OPERATOR6
  • ELECTRICIAN4

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2007-01-29, 19 years ago
0%
over PEL
27
samples
Most-sampled occupations
  • ELECTRICIAN5
  • SCOOP OPERATOR5
  • HIGHLIFT OPERATOR/FRONT END LOADER4
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Health sampling trend
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Year within 1.5 mg/m3 samples
2007 100% 11
2005 100% 9
2004 100% 2
2003 100% 8
2002 100% 11
Noise by year
Year over PEL samples
2007 0% 7
2005 0% 5
2004 0% 5
2003 0% 5
2002 0% 5
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

DTE Utah Synfuels LLC recorded 0.00 reportable injury cases per 100 full-time workers in 2007.

Injury rate, 2007
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 4.71 and the all-US-mining average was 3.77 cases per 100 workers.
In Utah, coal mining averaged 5.59 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2007 * 0.00 0.00 0.000
2006 * 4.25 0.00 0.000
2005 * 0.00 0.00 0.000
2004 * 0.00 0.00 0.000
2003 * 0.00 0.00 0.000
2002 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Headwaters Inc 1999 to 2005
  2. DTE Utah Synfuels LLC 2005 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2008 24
2007 24
2006 24
2005 24
2004 12
2003 16
2002 23
2001 13
Source: MSHA quarterly employment and production, updated weekly.

DTE Utah Synfuels LLC sits in Carbon County, Utah, where the Census mining category is 5.9% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Carbon County, Utah · Population 20,446
5.9%
Mining share of county employment
$53,673
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2008 Q1 1,920 0 0 0.0
2007 Q4 11,646 0 0 0.0
2007 Q3 10,959 0 0 0.0
2007 Q2 12,529 1 1 79.8
2007 Q1 12,470 4 1 320.8
2006 Q4 12,301 0 0 0.0
2006 Q3 10,973 0 0 0.0
2006 Q2 11,833 0 0 0.0
Show 20 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2006 Q1 11,971 0 0 0.0
2005 Q4 10,211 0 0 0.0
2005 Q3 12,513 0 0 0.0
2005 Q2 14,079 0 0 0.0
2005 Q1 13,031 0 0 0.0
2004 Q4 12,249 0 0 0.0
2004 Q3 3,980 0 0 0.0
2004 Q2 3,858 0 0 0.0
2004 Q1 2,616 0 0 0.0
2003 Q4 8,402 0 0 0.0
2003 Q3 2,817 0 0 0.0
2003 Q2 12,083 0 0 0.0
2003 Q1 12,905 0 0 0.0
2002 Q4 10,652 0 0 0.0
2002 Q3 9,793 0 0 0.0
2002 Q2 11,887 0 0 0.0
2002 Q1 10,921 0 0 0.0
2001 Q4 9,728 0 0 0.0
2001 Q3 5,065 0 0 0.0
2001 Q2 200 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

1 on file

2006 · 1 incident

February 7, 2006 UT · Coal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman STEPPING OR KNEELING ON OBJECT
DTE Utah Synfuels LLC · Struck against stationary object

Injured employee was sweeping the floor and stepped on a piece of coal which caused his right leg to slip from under him, twisting his knee. Initially the injury received only first aid level treatment. Knee pain persisted and the employee returned to the doctor. The doctor the diagnosed a possible torn meniscus in the knee and ordered a surgical scope of the knee.