Ran over 2" plastic pipe and it flipped up into car and hit him and cut his eyelid.
Eagle 2: 522 MSHA citations Coal
Eagle 2 has $114K in proposed MSHA penalties and $7K outstanding across 3 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Eagle 2.
- Fatalities
- 0
- Total incidents
- 13
- Years on record
- 2011–2015
- Latest incident
- May 2015
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.ⓘ
A Section 107(a) order removes miners from an area when an inspector finds an imminent danger. Each order is lifted once the condition is corrected, so this counts orders issued, not orders now in effect.Eagle 2 has $114K in proposed MSHA penalties and $7K outstanding across 3 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.ⓘ
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.- Settled 9 · 100%
ⓘ
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.ⓘ
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.| Docket | Decision | Judge | Year | Proposed / upheld |
|---|---|---|---|---|
| KENT 2015-0073 | Settlement | Miller | 2015 | $9K → $8K |
| KENT 2013-63 | Settlement | Bulluck | 2013 | $4K → $3K |
| KENT 2013-131 | Settlement | Bulluck | 2013 | $4K → $3K |
MSHA sampling at Eagle 2 shows 98% of 451 respirable coal dust samples met the 1.5 mg/m3 standard.
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2015-08-13, 11 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.ⓘ
The excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.- CONTINUOUS MINER OPERATOR222
- SHUTTLE CAR OPERATOR (STANDARD SIDE)56
- SCOOP CAR OPERATOR23
Silica (quartz)
Last sampled: 2015-07-14, 11 years ago- CONTINUOUS MINER OPERATOR19
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2015-07-07, 11 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.- SHUTTLE CAR OPERATOR (STANDARD SIDE)15
- CONTINUOUS MINER OPERATOR10
- UTILITY MAN8
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.| Year | within 1.5 mg/m3 | samples |
|---|---|---|
| 2015 | 100% | 48 |
| 2014 | 99% | 102 |
| 2013 | 100% | 102 |
| 2012 | 98% | 65 |
| 2011 | 99% | 79 |
| 2010 | 89% | 55 |
| Year | silica avg (%) | samples |
|---|---|---|
| 2015 | 6.2 | 6 |
| 2014 | 5.5 | 5 |
| 2013 | 5.5 | 7 |
| 2012 | 6.2 | 2 |
| 2011 | 5.3 | 8 |
| 2010 | 6.7 | 2 |
| Year | over PEL | samples |
|---|---|---|
| 2015 | 0% | 6 |
| 2014 | 7% | 14 |
| 2013 | 20% | 10 |
| 2012 | 7% | 15 |
| 2011 | 0% | 11 |
| 2010 | 0% | 1 |
Eagle 2 recorded 6.65 reportable injury cases per 100 full-time workers in 2015.
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2015 * | 6.65 | 0.00 | 0.000 |
| 2014 * | 11.70 | 7.80 | 0.000 |
| 2013 * | 10.24 | 6.83 | 0.000 |
| 2012 * | 12.65 | 4.22 | 0.000 |
| 2011 * | 9.53 | 9.53 | 0.000 |
- Mountain Top Hydroseeding Inc 2009 to 2010
- Jet Coal Company Inc 2010 to present
ⓘ
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.| Year | Employees | Coal produced (tons) |
|---|---|---|
| 2015 | 17 | 98,060 |
| 2014 | 22 | 130,502 |
| 2013 | 22 | 129,212 |
| 2012 | 22 | 112,818 |
| 2011 | 17 | 92,683 |
| 2010 | 21 | 79,044 |
| 2009 | 2 |
Eagle 2 sits in Pike County, Kentucky, where the Census mining category is 5.1% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2015 Q4 | 0 | 1 | 0 | |
| 2015 Q3 | 7,938 | 0 | 0 | 0.0 |
| 2015 Q2 | 10,995 | 6 | 2 | 545.7 |
| 2015 Q1 | 11,163 | 6 | 1 | 537.5 |
| 2014 Q4 | 10,805 | 17 | 6 | 1573.3 |
| 2014 Q3 | 12,163 | 31 | 2 | 2548.7 |
| 2014 Q2 | 15,098 | 26 | 5 | 1722.1 |
| 2014 Q1 | 13,195 | 14 | 2 | 1061.0 |
Show 16 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2013 Q4 | 12,801 | 40 | 8 | 3124.8 |
| 2013 Q3 | 17,318 | 38 | 8 | 2194.2 |
| 2013 Q2 | 15,505 | 15 | 2 | 967.4 |
| 2013 Q1 | 12,977 | 17 | 5 | 1310.0 |
| 2012 Q4 | 12,040 | 18 | 2 | 1495.0 |
| 2012 Q3 | 9,785 | 17 | 7 | 1737.4 |
| 2012 Q2 | 11,769 | 14 | 4 | 1189.6 |
| 2012 Q1 | 13,833 | 63 | 15 | 4554.3 |
| 2011 Q4 | 11,565 | 14 | 3 | 1210.5 |
| 2011 Q3 | 10,463 | 25 | 7 | 2389.4 |
| 2011 Q2 | 9,041 | 29 | 5 | 3207.6 |
| 2011 Q1 | 10,906 | 17 | 6 | 1558.8 |
| 2010 Q4 | 13,351 | 36 | 16 | 2696.4 |
| 2010 Q3 | 11,623 | 16 | 4 | 1376.6 |
| 2010 Q2 | 10,096 | 18 | 4 | 1782.9 |
| 2009 Q4 | 1,032 | 5 | 0 | 4845.0 |
Reportable incidents
13 on file2015 · 1 incident
2014 · 3 incidents
Timber fell over and hit employee in ribs
Using hammer drive ground rod in ground hammer slip forward hard hit rod and cut index finger.
Replace a torque shaft on a miner and twisted some and felt something pulled.
2013 · 3 incidents
Scoop bounced on roadway going in.
Step up on two crib blocks about 12" high - step off lost balance and fell hurt wrist
Picked up a chain and pulled something in back
2012 · 3 incidents
He was running the continuous miner and a small rock was throw out of the conveyor and hit employee above the right eye.
In #00 Heading, the man was cutting a piece of draw rock 1" thick by 30" long 12" wide fell from the top hit the man on his head and shoulders. Knocking him down.
Service the miner and reach to service parts and a small rock fell from the top and hit EE on his hand. Cut the back of his hand about 1 1/2" wide.
2011 · 3 incidents
Lifting rub rail, it slipped off the miner and fell on his foot.
In a worked out section that had been dangered off at the time the head was working. Five entry had been dangered off. A piece of rock between two hill seems fell out. Found at the time of making the returns. About 1400' off of section the entry had been curtain off for ventilation. 10' to 3' wide, 7' thick, 30' long.
While installing a strap, the strap spun around and cut his thumb.