Mining Incidents
Search Operators Mines Alerts Research Controllers Fatalgrams About
English Español
← Back to search

Gabes Creek Surface: 11 MSHA citations Coal

Big Laurel, Harlan County, KY  ·  Abandoned
MSHA Mine ID: 1518845

Gabes Creek Surface has $660 in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Gabes Creek Surface.

Fatalities
0
Total incidents
0
Years on record
—
Latest incident
—
Compliance record
MSHA citations since 2005
11
citations
0
significant & substantial
$660
proposed penalties
$660
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
See Associated Contracting LLC's full MSHA compliance history →
Inspection activity
MSHA inspections since 2005
3
inspections on record
96
inspection hours
n/a
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 96 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Gabes Creek Surface has $660 in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$660
proposed penalties
$660
current assessed
$660
paid to date
$0
outstanding
11 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2005-10-26.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
0.0%
significant & substantial
0.0%
high negligence or reckless
0.0%
reasonably likely or greater
0.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 0.0% low, 100.0% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.

MSHA sampling at Gabes Creek Surface shows 94% of 18 respirable coal dust samples met the 1.5 mg/m3 standard.

Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
ⓘ Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2006-01-20, 20 years ago
94%
within 1.5 mg/m3
18
samples
2.05
dust max (mg/m3)
10 samples taken by MSHA inspectors, 8 by the operator.
Most-sampled occupations
  • BULLDOZER OPERATOR9
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE5
  • HIGHLIFT OPERATOR/FRONT END LOADER3

Silica (quartz)

Last sampled: 2005-11-08, 20 years ago
12.6
silica avg (%)
2
samples
17.2
silica max (%)
Most-sampled occupations
  • BULLDOZER OPERATOR1
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE1
See US coal mines ranked by silica in their dust samples.

Noise
ⓘ The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2005-10-31, 20 years ago
0%
over PEL
10
samples
Most-sampled occupations
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE5
  • HIGHLIFT OPERATOR/FRONT END LOADER2
  • HIGHWALL DRILL OPERATOR2
See US mines ranked by noise samples over the legal limit.
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Health sampling trend
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
ⓘ Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Year within 1.5 mg/m3 samples
2006 100% 6
2005 92% 12
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Gabes Creek Surface recorded 0.00 reportable injury cases per 100 full-time workers in 2005.

Injury rate, 2005
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US coal mining average was 5.11 and the all-US-mining average was 4.21 cases per 100 workers.
In Kentucky, coal mining averaged 5.46 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Associated Contracting LLC 2005 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
ⓘ Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year Employees Coal produced (tons)
2006 25 46,746
2005 24 145,106
Source: MSHA quarterly employment and production, updated weekly.

Gabes Creek Surface sits in Harlan County, Kentucky, where the Census mining category is 4.3% of county employment.

Local economic context
ⓘ County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Harlan County, Kentucky · Population 26,185
4.3%
Mining share of county employment
$37,198
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2006 Q1 9,154 0 0 0.0
2005 Q4 15,388 5 0 324.9
2005 Q3 16,475 0 0 0.0
2005 Q2 17,792 4 0 224.8
2005 Q1 964 0 0 0.0

No reportable incidents on file.

MSHA has no recorded reportable accidents for this mine in the current dataset. New reports appear here within a week of being filed.