Mining Incidents

GILMORE PIT: 81 MSHA citations Metal/Non-Metal

Controlled by James Campbell
Century, FL, Escambia County, AL  ·  Abandoned
MSHA Mine ID: 0100719

GILMORE PIT has $69K in proposed MSHA penalties and $0 outstanding across 2 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at GILMORE PIT.

Fatalities
0
Total incidents
3
Years on record
1989–2003
Latest incident
Nov 2003
Compliance record
MSHA citations since 2000
81
citations
29
significant & substantial
$69,216
proposed penalties
$46,272
paid to date
67% of proposed penalties paid to date, a $22,944 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
27
inspections on record
315
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 315 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

GILMORE PIT has $69K in proposed MSHA penalties and $0 outstanding across 2 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$69K
proposed penalties
$46K
current assessed
$46K
paid to date
$0
outstanding
79 assessments are final orders; 2 contested dockets.
Of $40K in penalties contested before the Commission, $15K was upheld in final decisions.
As of the most recent assessment on 2007-07-12.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
36.2%
significant & substantial
18.8%
high negligence or reckless
36.2%
reasonably likely or greater
67.5%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 0.0% low, 81.2% moderate, 18.8% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
5 citations taken to the federal commission · 6% of citations on record
  • Settled 4 · 80%
  • Vacated or withdrawn 1 · 20%
67%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 3 decided S&S contests · industry: 79%
68%
Penalty reduction in decided contests
$36K proposed, $12K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2007-10-02.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
SE 2008-8M Settlement Feldman 2008 $36K → $12K
SE 20030079M Settlement Feldman 2003 $4K → $4K
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2003-11-19, 22 years ago
4
samples
0
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg4
Show the individual readings (4)
Date Contaminant Concentration Limit Conc / limit Occupation
2003-11-19 Respirable dust, <.1mg 0 Bulldozer Operator
2003-11-19 Respirable dust, <.1mg 0 Laborer, Bullgang
2003-11-19 Respirable dust, <.1mg 0 Backhoe Operator
2003-11-19 Respirable dust, <.1mg 0 Laborer, Bullgang
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Ownership history
  1. Campbell Sand & Gravel Company 1950 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2008 0
2007 4
2006 4
2005 5
2004 5
2003 4
2002 5
2001 6
2000 5
Source: MSHA quarterly employment and production, updated weekly.

GILMORE PIT sits in Escambia County, Alabama, where the Census mining category is 0.5% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Escambia County, Alabama · Population 36,695
0.5%
Mining share of county employment
$44,447
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2008 Q1 0 0 0
2007 Q4 548 0 0 0.0
2007 Q3 1,905 11 2 5774.3
2007 Q2 2,299 0 0 0.0
2007 Q1 2,078 0 0 0.0
2006 Q4 2,943 0 0 0.0
2006 Q3 2,834 23 12 8115.7
2006 Q2 1,721 0 0 0.0
Show 25 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2006 Q1 2,225 0 0 0.0
2005 Q4 2,256 0 0 0.0
2005 Q3 2,269 0 0 0.0
2005 Q2 2,700 0 0 0.0
2005 Q1 2,700 0 0 0.0
2004 Q4 2,700 0 0 0.0
2004 Q3 2,776 0 0 0.0
2004 Q2 2,776 7 3 2521.6
2004 Q1 2,210 0 0 0.0
2003 Q4 2,210 6 1 2714.9
2003 Q3 2,210 0 0 0.0
2003 Q2 2,210 0 0 0.0
2003 Q1 2,080 2 1 961.5
2002 Q4 2,600 6 1 2307.7
2002 Q3 2,600 10 2 3846.2
2002 Q2 2,600 2 2 769.2
2002 Q1 2,600 0 0 0.0
2001 Q4 2,337 0 0 0.0
2001 Q3 2,591 2 0 771.9
2001 Q2 2,019 10 5 4952.9
2001 Q1 2,860 0 0 0.0
2000 Q4 2,860 0 0 0.0
2000 Q3 2,860 0 0 0.0
2000 Q2 2,860 2 0 699.3
2000 Q1 2,860 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

3 on file

2003 · 1 incident

November 7, 2003 AL · Metal/Non-Metal miner, nec SLIP OR FALL OF PERSON
Campbell Sand & Gravel Company · Over-exertion (Not Elsewhere Classified)

WHILE CLIMBING ON TRUCK HIS FOOT SLIPPED CAUSING RIGHT ARM TO CATCH, TEARING MUSCLE ON RIGHT SHOULDER & PINCHING NERVE IN RIGHT ARM. THIS INJURY WAS NOT REPORTED TO ME UNTIL 11/11/03.

1992 · 1 incident

January 31, 1992 AL · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator SLIP OR FALL OF PERSON
Campbell Sand & Gravel Company · Fall to the walkway or working surface

SLIPPED ON PADDLE OF LOG WASHER TWISTING LEFT KNEE CAP OUT OF JOINT

1989 · 1 incident

April 27, 1989 AL · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator POWERED HAULAGE
Campbell Sand & Gravel Company · Struck by falling object

A IRON ROCK FELL OFF HOPPER AND HIT ON LEFT ARM.