Mining Incidents
Search Operators Mines Alerts Research Controllers Fatalgrams About
Countries
Peru Chile
English Español
← Back to search

Glenwood: 174 MSHA citations Metal/Non-Metal

TM Crushing, LLC · Surface
Controlled by John D Hadfield
West Jordan, Salt Lake County, UT  ·  Active
MSHA Mine ID: 4202457

Glenwood has $206K in proposed MSHA penalties and $151 outstanding across 7 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Glenwood.

Fatalities
0
Total incidents
4
Years on record
2006–2013
Latest incident
Oct 2013
Compliance record
MSHA citations since 2006
174
citations
65
significant & substantial
$205,998
proposed penalties
$183,729
paid to date
89% of proposed penalties paid to date, a $22,269 gap.
Source: MSHA violations data, updated weekly.
See TM Crushing, LLC's full MSHA compliance history →
Inspection activity
MSHA inspections since 2006
53
inspections on record
753
inspection hours
n/a
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 753 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Glenwood has $206K in proposed MSHA penalties and $151 outstanding across 7 contested dockets.

Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$206K
proposed penalties
$184K
current assessed
$184K
paid to date
$151
outstanding
172 assessments are final orders; 7 contested dockets.
Of $135K in penalties contested before the Commission, $112K was upheld in final decisions.
As of the most recent assessment on 2026-06-25.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
37.6%
significant & substantial
20.8%
high negligence or reckless
37.6%
reasonably likely or greater
83.8%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 3.5% low, 75.7% moderate, 20.8% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
ⓘ Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
80 citations taken to the federal commission · 46% of citations on record
  • Settled 76 · 95%
  • Stood as issued 1 · 1%
  • Vacated or withdrawn 3 · 4%
95%
S&S designation survived the contest
ⓘ Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 39 decided S&S contests · industry: 79%
20%
Penalty reduction in decided contests
$142K proposed, $115K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2025-09-08.
Contested penalties
ⓘ A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
WEST 2010-363M Settlement Rucker, Jr 2011 $59K → $44K
WEST 2012-963M Settlement Lesnick 2013 $27K → $27K
WEST 2010-364M Settlement Lesnick 2010 $19K → $18K
WEST 2012-1386M Settlement Lesnick 2013 $13K → $11K
WEST 2024-0077 Settlement Simonton 2024 $11K → $7K
WEST 2025-0385 Settlement Simonton 2026 $5K → $4K
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
ⓘ Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2026-06-26
18%
of limit-tested samples over the exposure limit
23
samples
17
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz173 over
  • Respirable dust, <.1mg6
Show the individual readings (23)
Date Contaminant Concentration Limit Conc / limit Occupation
2026-06-26 Quartz, respirable, >1% Qtz 0.36 0.36 1.00 Front-end Loader Operator
2009-10-14 Quartz, respirable, >1% Qtz 0.67 0.6 1.12 Front-end Loader Operator
2009-10-14 Quartz, respirable, >1% Qtz 0.39 0.25 1.56 Laborer, Bullgang
2026-06-26 Quartz, respirable, >1% Qtz 0.47 0.78 0.60 Front-end Loader Operator
2026-06-26 Quartz, respirable, >1% Qtz 0.32 0.68 0.47 Laborer, Bullgang
2023-05-10 Quartz, respirable, >1% Qtz 0.27 0.53 0.51 Bulldozer Operator
2023-05-10 Quartz, respirable, >1% Qtz 0.12 0.36 0.33 Laborer, Bullgang
2021-04-15 Respirable dust, <.1mg 0 Bulldozer Operator
2021-04-15 Respirable dust, <.1mg 0 Front-end Loader Operator
2019-07-03 Quartz, respirable, >1% Qtz 0.21 0.59 0.36 Front-end Loader Operator
2011-08-24 Quartz, respirable, >1% Qtz 0.23 0.29 0.79 Dry Screen Plant Operator
2011-08-24 Quartz, respirable, >1% Qtz 0.19 0.3 0.63 Utility Man
2010-05-04 Quartz, respirable, >1% Qtz 0.22 0.83 0.27 Crusher Oper/Worker
2010-05-04 Respirable dust, <.1mg 0 Front-end Loader Operator
2010-05-04 Quartz, respirable, >1% Qtz 0.18 0.34 0.53 Front-end Loader Operator
2010-02-24 Quartz, respirable, >1% Qtz 0.12 0.56 0.21 Supervisor, Co. Official
2010-02-24 Quartz, respirable, >1% Qtz 0.14 0.78 0.18 Crusher Oper/Worker
2010-02-24 Respirable dust, <.1mg 0 Scraper Operator
2009-10-14 Quartz, respirable, >1% Qtz 0.38 0.89 0.43 Washer Operator
2009-10-14 Quartz, respirable, >1% Qtz 0.36 0.37 0.97 Front-end Loader Operator
2009-10-14 Quartz, respirable, >1% Qtz 0.2 0.32 0.63 Front-end Loader Operator
2007-12-12 Respirable dust, <.1mg 0 Front-end Loader Operator
2007-12-12 Respirable dust, <.1mg 0 Front-end Loader Operator

Area samples (mill and shop air)

Last sampled: 2017-01-19, 9 years ago
2
samples
Show the individual readings (2)
Date Contaminant Concentration Limit Conc / limit Area sampled
2017-01-19 Respirable dust, <.1mg 0 Cat 980H
2017-01-19 Respirable dust, <.1mg 0 Crusher Trailer
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Glenwood recorded 7.96 reportable injury cases per 100 full-time workers in 2013.

Injury rate, 2013
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
7.96
total case rate
7.96
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 2.46 and the all-US-mining average was 2.99 cases per 100 workers.
In Utah, metal and nonmetal mining averaged 1.48 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2013 * 7.96 7.96 0.000
2012 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. TM Crushing, LLC 2006 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 9
2025 9
2024 8
2023 6
2022 4
2021 4
2020 6
2019 5
2018 6
2017 6
2016 2
2014 0
2013 10
2012 9
2011 8
2010 13
2009 9
2008 3
2007 4
2006 3
Source: MSHA quarterly employment and production, updated weekly.

Glenwood sits in Salt Lake County, Utah, where the Census mining category is 0.4% of county employment.

Local economic context
ⓘ County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Salt Lake County, Utah · Population 1,184,689
0.4%
Mining share of county employment
$94,658
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 3,596 1 0 278.1
2026 Q1 3,041 0 0 0.0
2025 Q4 3,829 1 0 261.2
2025 Q3 3,986 8 1 2007.0
2025 Q2 3,481 0 0 0.0
2025 Q1 3,032 0 0 0.0
2024 Q4 3,563 3 0 842.0
2024 Q3 4,670 0 0 0.0
Show 61 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 4,745 5 1 1053.7
2024 Q1 2,881 0 0 0.0
2023 Q4 1,813 7 4 3861.0
2023 Q3 2,706 0 0 0.0
2023 Q2 2,758 4 1 1450.3
2023 Q1 2,577 0 0 0.0
2022 Q4 788 1 0 1269.0
2022 Q3 1,177 5 0 4248.1
2022 Q2 1,138 0 0 0.0
2022 Q1 1,360 0 0 0.0
2021 Q4 935 0 0 0.0
2021 Q3 2,501 0 0 0.0
2021 Q2 2,520 0 0 0.0
2021 Q1 2,428 0 0 0.0
2020 Q4 3,589 2 0 557.3
2020 Q3 3,197 0 0 0.0
2020 Q2 3,249 3 0 923.4
2020 Q1 3,289 0 0 0.0
2019 Q4 3,929 4 0 1018.1
2019 Q3 3,235 2 0 618.2
2019 Q2 3,420 0 0 0.0
2019 Q1 2,935 0 0 0.0
2018 Q4 3,004 0 0 0.0
2018 Q3 3,183 1 0 314.2
2018 Q2 3,404 0 0 0.0
2018 Q1 3,589 0 0 0.0
2017 Q4 4,436 4 0 901.7
2017 Q3 4,748 0 0 0.0
2017 Q2 3,863 0 0 0.0
2017 Q1 1,477 1 0 677.0
2016 Q4 437 0 0 0.0
2014 Q1 0 1 0
2013 Q4 8,019 0 0 0.0
2013 Q3 7,477 0 0 0.0
2013 Q2 5,587 4 2 715.9
2013 Q1 4,054 2 0 493.3
2012 Q4 5,673 0 0 0.0
2012 Q3 6,752 0 0 0.0
2012 Q2 5,237 11 7 2100.4
2012 Q1 5,437 25 13 4598.1
2011 Q4 5,394 0 0 0.0
2011 Q3 5,277 0 0 0.0
2011 Q2 3,935 1 0 254.1
2011 Q1 2,551 1 0 392.0
2010 Q4 4,031 0 0 0.0
2010 Q3 5,840 0 0 0.0
2010 Q2 5,042 16 8 3173.3
2010 Q1 2,870 2 1 696.9
2009 Q4 7,824 5 2 639.1
2009 Q3 7,513 34 15 4525.5
2009 Q2 2,190 3 0 1369.9
2009 Q1 993 0 0 0.0
2008 Q4 1,748 11 8 6292.9
2008 Q3 2,872 0 0 0.0
2008 Q2 1,982 0 0 0.0
2008 Q1 1,098 0 0 0.0
2007 Q4 2,281 1 0 438.4
2007 Q3 3,842 0 0 0.0
2007 Q2 3,375 0 0 0.0
2007 Q1 2,700 0 0 0.0
2006 Q4 1,707 2 0 1171.6
No fatalities recorded at this mine.

Reportable incidents

4 on file

2013 · 1 incident

October 26, 2013 UT · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDTOOLS (NONPOWERED)
TM Crushing, LLC · Struck by... (Not Elsewhere Classified)

Using a ratchet and it broke and flung back and struck face. Broken Nose.

2010 · 2 incidents

November 23, 2010 UT · Metal/Non-Metal outside foreman, leadman SLIP OR FALL OF PERSON
TM Crushing, LLC · Over-exertion (Not Elsewhere Classified)

He was walking and slipped on some ice that was in a shadow and under some snow. He broke his ankle as a result of the slip.

August 4, 2010 UT · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
TM Crushing, LLC · Struck by... (Not Elsewhere Classified)

Employee self-inflicted a 1" incision on his left thigh with a razor knife while cutting a piece of rubber.

2006 · 1 incident

December 12, 2006 UT · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator POWERED HAULAGE
TM Crushing, LLC · Caught in, under or between a moving and a stationary object

Partial amputation third metacarpal right hand. Hand caught in Pulley while replacing belt. Bearing Replacement on Conveyor Belt System.