citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 245 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
GLOUCESTER PLANT has $1K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$1K
proposed penalties
$943
current assessed
$943
paid to date
$0
outstanding
14 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2006-04-25.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Metal and nonmetal contaminants (personal samples)
ⓘMany samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2004-02-25, 22 years ago
0%
of limit-tested samples over the exposure limit
7
samples
3
limit-tested
Most sampled contaminants
Respirable dust, <.1mg4
Quartz, respirable, >1% Qtz3
Show the individual readings (7)
Date
Contaminant
Concentration
Limit
Conc / limit
Occupation
2004-02-25
Quartz, respirable, >1% Qtz
0.21
1.2
0.18
Mechanic
2004-02-25
Respirable dust, <.1mg
0
Backhoe Operator
2004-02-25
Respirable dust, <.1mg
0
Backhoe Operator
2002-09-11
Respirable dust, <.1mg
0
Bulldozer Operator
2002-09-11
Respirable dust, <.1mg
0
Front-end Loader Operator
2002-09-11
Quartz, respirable, >1% Qtz
0.14
0.88
0.16
Laborer, Bullgang
2002-09-11
Quartz, respirable, >1% Qtz
0.23
1.13
0.20
Backhoe Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
GLOUCESTER PLANT recorded 0.00 reportable injury cases per 100 full-time workers in 2004.
Injury rate, 2004
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US metal and nonmetal mining average was 3.73 and the all-US-mining average was 4.33 cases per 100 workers.
In Virginia, metal and nonmetal mining averaged 2.52 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year
Employees
2006
7
2005
8
2004
8
2003
7
2002
7
2001
6
2000
7
Source: MSHA quarterly employment and production, updated weekly.
GLOUCESTER PLANT sits in Gloucester County, Virginia, where the Census mining category is 0.3% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Gloucester County, Virginia · Population 39,228
0.3%
Mining share of county employment
$83,689
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2006 Q2
4,369
1
1
228.9
2006 Q1
4,646
0
0
0.0
2005 Q4
4,262
0
0
0.0
2005 Q3
4,456
0
0
0.0
2005 Q2
5,044
0
0
0.0
2005 Q1
5,460
1
0
183.2
2004 Q4
5,139
0
0
0.0
2004 Q3
5,443
0
0
0.0
Show 18 earlier quartersHide earlier quarters
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2004 Q2
5,455
0
0
0.0
2004 Q1
5,056
0
0
0.0
2003 Q4
4,671
0
0
0.0
2003 Q3
4,490
0
0
0.0
2003 Q2
4,692
0
0
0.0
2003 Q1
3,930
1
0
254.5
2002 Q4
3,919
0
0
0.0
2002 Q3
4,592
1
0
217.8
2002 Q2
3,744
0
0
0.0
2002 Q1
3,866
0
0
0.0
2001 Q4
4,353
3
0
689.2
2001 Q3
4,489
2
0
445.5
2001 Q2
4,178
0
0
0.0
2001 Q1
4,126
0
0
0.0
2000 Q4
4,893
2
0
408.7
2000 Q3
4,332
0
0
0.0
2000 Q2
5,477
0
0
0.0
2000 Q1
5,020
0
0
0.0
No fatalities recorded at this mine.
Reportable incidents
2 on file
2005 · 1 incident
February 16, 2005VA · Metal/Non-Metalbulldozer operator, universal operator, heavy equipment operator, operating engineerSLIP OR FALL OF PERSON
After employee had bolted shaft on belt winder, he backed away from the equipment and tripped over the truing shaft located close to the ground. He finished off his shift for the day, but complained about pains the following day. The doctor informed that he injured his lower lumbar region and needed to stay away from work for a period of at least three days.
2001 · 1 incident
February 26, 2001VA · Metal/Non-Metalbulldozer operator, universal operator, heavy equipment operator, operating engineerHANDLING OF MATERIALS
THE EE WAS ASSISTING WITH CHANGING THE SCREEN CLOTH ON THE POWER SCREEN MENTIONED BELOW WHEN HIS FINGER WAS CAUGHT BETWEEN THE SCREEN CLOTH AND THE STEEL RAIL. THIS RESULTED IN THE TIP OF THE FINGER BEING FRACTURED.