HWM Job #30 Coal
Mining Technologies, Inc.
· Surface
Controlled by
Horizon Natural Resources Incorporated
Pikeville,
Pike County,
KY
·
Abandoned
MSHA Mine ID: 1518596
MSHA sampling at HWM Job #30 shows 100% of 4 respirable coal dust samples met the 1.5 mg/m3 standard, plus the mine's fatality, citation, and penalty record.
Watch this mine
Email me when a new MSHA incident is filed at HWM Job #30.
- Fatalities
- 0
- Total incidents
- 0
- Years on record
- —
- Latest incident
- —
Inspection activity
MSHA inspections since 2003
5
inspections on record
36
inspection hours
n/a
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Rate withheld: 36 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
MSHA sampling at HWM Job #30 shows 100% of 4 respirable coal dust samples met the 1.5 mg/m3 standard.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2003-03-12, 23 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.100%
within 1.5 mg/m3
4
samples
0.82
dust max (mg/m3)
4 samples taken by MSHA inspectors, 0 by the operator.
Most-sampled occupations
- BELT MAN/CONVEYOR MAN2
- AUGER HELPER1
- HIGHLIFT OPERATOR/FRONT END LOADER1
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
HWM Job #30 recorded 0.00 reportable injury cases per 100 full-time workers in 2003.
Injury rate, 2003
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US coal mining average was 5.87 and the all-US-mining average was 4.43 cases per 100 workers.
In Kentucky, coal mining averaged 6.65 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
- Mining Technologies, Inc. 2002 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
ⓘ
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.| Year | Employees | Coal produced (tons) |
|---|---|---|
| 2003 | 17 | 61,651 |
| 2002 | 0 |
Source: MSHA quarterly employment and production, updated weekly.
HWM Job #30 sits in Pike County, Kentucky, where the Census mining category is 5.1% of county employment.
Local economic context
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.Pike County, Kentucky · Population 57,466
5.1%
Mining share of county employment
$42,179
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.Citations per million employee-hours, as reported to MSHA
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2003 Q4 | 851 | 0 | 0 | 0.0 |
| 2003 Q3 | 9,110 | 0 | 0 | 0.0 |
| 2003 Q2 | 4,043 | 0 | 0 | 0.0 |
| 2003 Q1 | 12,238 | 0 | 0 | 0.0 |
| 2002 Q4 | 0 | 0 | 0 |
No reportable incidents on file.
MSHA has no recorded reportable accidents for this mine in the current dataset. New reports appear here within a week of being filed.