Kennecott Barneys Canyon Mining Metal/Non-Metal

EE PLACED A COMEALONG OVER A BEAM AS HE DID THE HOOK CAME AROUND & HIT HIS HARD HAT CAUSING A LACERATION TO HIS FOREHEAD

EMPLOYEE WAS FIXING A HARD BAR ON A CHALLENGER. HE REMOVED 7 OF 8 BOLTS WITH AN IMPACT WRENCH. HE USED A HARD WRENCH ON THE EIGHTH BOLT. HE THOUGHT HE WAS OUT OF THE WAY OF THE BELLY PAN. THE BELLY PAN WAS 6' INSTEAD OF 3'. AFTER RLEASING THE EIGHTH BOLT, THE BELLY PAN WAS 6' INSTEAD OF 3'. THE BELLY PAN FELL AND PINNED EMPLOYEE'S HEAD TO THE GROUND.

WALKING IN FUEL CONTAINMENT AREA. SLIPPED ON PLASTIC LINER AND TWISTED LOWER BACK.

EE WAS PULLING A SHAFT FROM A PJMP, THE SHAFT FELL, PINCHING HIS RIGHT THUMB. THIS LACERATION REQUIRED FIVE SUTURES TO REPAIR.

BREAKING ORE AWAY FROM A CHUTE WITH A BAR. THE ORE GAVE WAY, PUSHING THE BAR AND PINCHED HIS THUMB.

TANKER TRUCK/TRAILER HAULING GOLD SLURRY OVERTURNED ON HAULAGE ROAD TO CONCENTRATOR ACCIDENT OCCURRED IN DAYLIGHT HOURS ATTEMPTING TO AVOID DEER IN ROAD

THE MAINT TECH WAS PICKING UP A HOSE WHEN A WIRE FROM THE HOSE CUT HIS ARM.

A MAINTENANCE TECHNICIAN WAS TIGHTENING A PULL DOWN CABLE ON THE #101 DRILL. WHEN THE WRENCH SLIPPED AND CAUGHT HIS LEFT RING FINGER BETWEEN THE CABLE EYE AND WRENCH, CAUSING A FRACTURE.

A MAINTENANCE TECHNICIAN WAS USING A RAZOR KNIFE TO STRIP INSULATION OFF OF A WIRE HARNESS ON THE LEFT REAR STRUT SENSOR ON THE #313 HAUL TRUCK AND CUT HIS LEFT HAND, WHICH REQUIRED SUTURES.

AN UNPLANNED DETONATION OCCURRED AT THE 7080' LEVEL OF THE MELCO PIT AT BARNEYS CANYON MINE. THE FIRING DEVICE FOR A NONELECTRIC SYSTEM WAS ATTACHED TO THE SHOCK TUBE PRIOR TO ALL PERSONNEL BE ING CLEAR OF DESIGNATED BLAST AREA. NO INJURIES WERE INCURRED NO HAS ANY DETERMINATION BEEN ABLE TO IDENTIFY WHAT CAUSED THE DETONATION OTHER THAN THE SYSTEM WAS NOT USED IN ACCORDANCE WITH T

A MAINTENANCE TECHNICIAN WAS CUTTING A PIECE OF POLYETHYLENE WITH A RAZOR KNIFE WHEN IT SLIPPED CUTTING HIS RIGHT LEG ABOVE THE KNEE CAUSING A LACERATION REQUIRING SUTURES.

THE REFINER WAS WORKING IN PROCESS WHEN HE INADVERTENTLY OPENED THE WRONG SOLUTION ADDITION VALVE WHICH WAS UNDER PRESSURE, SPRAYING A HOT CAUSTIC SOLUTION UPWARD AND UNDER HIS SAFETY GLASSES, CAUSING A THERMAL CHEMICAL BURN TO HIS RIGHT EYE.

A MAINTENANCE TECH WHILE DISMOUNTING FROM THE TRANSFER CONVEYOR SUFFERED A KNEE SPRAIN WHEN HE JUMPED FROM THE CONVEYOR FRAME TO GROUND LEVEL (APPROX. 29 INCHES). A FOLLOW UP MEDICAL EVALUATIO N OF MAY 13 IT WAS DETERMINED THAT A TEAR OF THEMENICUS CARTLAGE OCCURRED.

AN OPERATOR I WAS DOING HIS PRE-SHIFT INSPECTION OF THE #202 TRACK HOE & WHEN OPENING AN [?] COMPARTMENT DOOR GOT HIS FINGER PINCHED BETWEEN THE DOOR & THE BACK OF THE MACHINE.

AN OPERATOR WAS LIFTING A TAIL BEARING GUARD BACK INTO PLACE WHE HIS HAND SLIPPED OFF THE BOTTOMOF THE GUARD. ALLOWING IT TO SWING DOWN,PINCHING TWO FINGERS ON HIS LEFT HAND BETWEEN THE GUARD AND FRAME. CAUSING TWO FINGERS TO BE FRACTURED FOUR SUTURES WERE REQUIRED TO CLOSE A LACERATION ON ONE OF THE FINGERS.

WHILE REMOVING A BOLT FROM A FAN HOUSING A MAINTENANCE TECHNICIAN STRUCK HIS FACE ONTHE FAN HOUSING WHEN THE WRENCH SLIPPED OFF OF THE BOLT. THIS CAUSED SOME SLIGHT CHIPPING OF TWO CAPS ON HIS FRONT TEETH. STILL INVESTIGATING TO ENSURE CAUSE OD CHIPPED CAPS. NO CUTS OR BLEEDING OCCURRED.

EE WAS CUTTING UNEVERED RUBBER AND WAS HOLDING A STRAIGHT EDGE WITH HIS LEFT HAND AND CUTTING WITH A OLFAL RAZOR KNIFE IN HIS RIGHT HAND WHEN HE LACERATED HIS LEFT THUMB WITH THE KNIFE.

AN OPERATOR WAS CUTTING A PIECE OF URETHANE WHEN THE RAZOR KNIFE HE WAS USING SLIPPED AND STRUCK HIS LEFT LEG, CAUSING A LACERATION, WHICH REQUIRED SEVEN SUTURES TO CLOSE.

ON 3-8-97 AN OPERATOR I WAS LIFTING THE STACKER STEERING WHEEL TONGUE TO GUIDE THE STACKER WHEN HE FELT PAIN IN HIS GROIN AREA. ON 3-11-97, FURTHER MEDICAL FOLLOW UP DETERMINED THE OPERATOR I HAD A HERNIA.

AN OPERATOR II WAS DISMOUNTING THE #211 LOADER, USING BOTH HANDS ONTHE LOWER HANDRAILS, WHEN HER FOOT SLIPPED OFF THE LAST STEP CAUSING HER TO SLIP AND TO PULL ON HER LEFT SHOULDER AND ARM. ON 3-12-97 FURTHER MEDICAL FOLLOW UP DETERMINED THE OPERATOR II NEEDED TO START PHYSICAL THERAPY.

ON FEBRUARY 20, 1997 AN OPERATOR I WAS WALKING AND STEPPED ON A SNOW COVERED HOLE WITH HIS LEFT FOOT/LEG, CAUSING A PAIN IN HIS GROIN AREA. ON MARCH 5, 1997 FURTHER MEDICAL FOLLOW UP DETERMINE D THE OPERATOR I HAD A HERNIA.

EE SUFFERED A SPRAINED ANKLE WHEN HE FELL WHILE=FUELING A TORPEDO HEATER, NEAR THE TAIL OF THE CVIII CONVEYOR

AS OPERATOR II WAS REMOVING THE DRIVER SUB FROM THE HAMMER ON THE 103 DRILL WHEN HIS LEFT THUMB WAS CAUGHT AND PINCHED, CAUISNG A LACERATION TO HIS THUMB, WHICH REQUIRED SIX STITCHES TO CLOSE.

EE WAS CUTTING BELTING WHEN THE KNIFE EE WAS USING, SLIPPED CUTTING THROUGH WORK GLOVES AND LACERATING HIS LEFT HAND.

EMP WAS PRYING A HANDRAIL LOOSE WHEN THE END OF THE RAIL POPPED UP, STRIKING EMP ON LOWER RIGHT JAW.

EMPLOYEE LOADED BOBCAT ON TRAILER AND WAS DISMOUNTING FROM EQUIPMENT. STRUCK RIGHT HAND AND CUT IT REQUIRING 3 STITCHES.

ON 5-15-96 WHILE LIFTING A METAL PLATE EE STRAINED HIS BACK. HE ALLEGES THAT THRU BACK INJURY INCURVED ON 5-15-96 IS THE CAUSE FOR HIS NEED OF SURGERY ON TUESDAY JUNE 25 1996. THIS MATTER IS S TILL WATER INVESTIGATION.

A MAINTENANCE TECHNICIAN INCURRED A REPORTABLE INJURY WHEN HE INADVERTENTLY RAKED HIS HAND ACROSS A PIECE OF WIRE REINFORCEMENT PROTRUDING FROM THE END OF A HOSE WHILE LOADING IT IN A TRUCK.

EE INCURRED A FRACTURED SCAPULA WHEN HE SLIPPED AND FELL APPROX 7' FROM A HAUL TRUCK WHILE ATTEMPTING TO ACCESS THE ENGINE COMPARTMENT TO CHECK A STARTER. IN ADDITION, HE SUSTAINED A BUMP AND SMALL LACERATION ON HIS HEAD. HIS MEDICAL EVALUATION INDICATED NO CONCUSSION.

BIT ON 631-D SCRAPER. LOWERED BIT INTO CAN WITH LOADER. THEN USED TWO CENTERING BARS TO LOWER BIT INTO PLACE. PLACED IN CAN AND UPPER LEG TO HOLD IN PLACE. THEN IT SLIPPED. HE TRIED TO MOVE QU ICKLY TO GET OUT OF THE WAY, BUT WASN'T QUICK ENOUGH AND IT LANDED ON ANKLE.

COMING DOWN HILL IN SCRAPER. HA DHEAD TURNED AND DID NOT SEE ROCK IN THE ROAD AND HE RAN OVER IT.

A MINE SUPERVISOR INCURRED MULTIPLE CONTUSIONS WHEN HIS VEHICLE OVERTURNED DURING A PRE-SHIFT EXAMINATION. THE SUPERVISOR WAS WEARING HIS SEAT BELT WHICH HELPED MINIMIZE HIS INJURIES.

OPERATOR CARRYING A BUCKET OF XANTHATE. BUCKET SPLASHED ONTO OPERATOR'S FACE, OPERATOR WAS WEARING SAFETY GLASSES.

EMPLOYEE WAS DRYING HIS GLOVES ON THE WELDER MOTOR WHEN HIS LEFT HAND CAME IN CONTACT WITH THE FAN BLADES.

EMPLOYEE SLIPPED ON ICE FALLING ON FINGER.

WHILE TROUBLE SHOOTING AIR LEAKS IN DISC FILTER, MAINTENANCE SUPERVISOR PUT HAND HEAR SHAFT TO CHECK FOR AIR MOVEMENT AND GOT FINGERS PINCHED.

EE WAS TRIMMING A SCRAPER ON GRASSHOPPE #16 WITH A RAZOR KNIFE. THE KNIFE SLIPPED OFF THE SCRAPER CUTTING HIS LEFT THUMB REQUIRING STITCHES.

EE WAS OPERATING FRONT END LOADER AND HIT HARD MATERIAL JOLTING HIS BACK AND SHOULDER. INITIAL MEDICAL EXAM RETURNED HIM TOW ORK WITH RESTRICTIONS. A SUBSEQUENT VISIT TO A SPECIALIST ON 3-30-9 5 PUT THE EE OFF WORK FOR 2-3 WEEKS.

A SULFIDE PLANT OPERATOR INCURRED AN AC SHOULDERSEPARATION WHEN HE SLIPPED AND FELL ON HIS ARM.

EMPLOYEE WAS WALKING ON THE FLOOR UNDER THE TAILINGS THICKENER WHEN HE STEPPED ON POLYMER. HE DID NOT FALL TO THE FLOOR. HOWEVER, WHILE ATTEMPTING TO REGAIN HIS BALANCE, HE WRENCHED HIS BACK. EMPLOYEE HAS BEEN OFF WORK SINCE THE ACCIDENT AND WILL CONTINUE TO BE OFF WORK UNTIL HE HAS FULLY RECOVERED (APPROXIMATELY 2-3- WEEKS).

EE ALLEGES THAT HIS INGUINAL HERNIA WAS CAUSED BAT WORK SINCE HE IS MORE ACTIVE AT WORK THAN AT HOME. NO SPECIFIC INCIDENT WAS IDENTIFIED AS THECAUSE.

EMPLOYEE PULLING ON WRENCH, WRENCH SLIPPED STRIKING EMPLOYEE IN FOREHEAD, LACERATING FOREHEAD.

BULLDOZER OPERATOR COMPLAINED OF BACK PAIN AFTER BEING JOSTELD IN CAB.

EE WAS STRIPPING HIGH VOLTAGE CABLE WHEN KNIFE SLIPPED AND CUT THRU GLOVE INTO LEFT PALM.

A HAUL TRUCK OPERATOR SUSTAINED A BROKEN LEG WHEN HE WAS STRUCK BY HIS OWN ROLLING UNMANNED TRUCK (PARK BRAKE NOT SET) DURING AN OPERATOR BREAK

MAINTENANCE TECHNICIAN H0LDING DRILL WHICH SLIPPED CAUSING EMPLOYEE'S LEFT HAND TO CONTACT CHANNEL STRAP, CUTTING LEFT MIDDLE FINGER.

EMPLOYEE WHILE WALKING FELL TO GROUND THRU SNOW STRIKING RIBS ON A ROCK. NOTE:EMPLOYEE FOLLOWED UP WITH HIS OWN DR. EMPLOYEE NOTIFIED EMPLOYEER OF FRACTURE ON 2/28/94.

OPERATOR LIFTING POWER CORD OVER FRAME OF CONVEYOR. FINGER GOT PINCHED BETWEEN FRAME AND END PLUG OF CORD.

LIFTING UP MUD TANKS TO SEE WARE THEM WITH A CHAIN AND BINDER, CHAIN ON MAIN LINE OT TANKS CAME LOSOE CAUSIGN HIS CHAIN TO YANK BINDER OPEN WHILE HE HAD HOLD OF IT.

EMPLOYEE WAS OPERATING A TRACK DOZER IN HIGH MOUNTAIN COUNTRY,FELT STING ON ARM.WITHIN 24 HOURS THERE WAS A MARKED SWELLING AND REDNESS.WAS REFERRED TO PHYSICIAN FOR DIAGNOSIS.

EMPLOYEE KNOCKED ON WINDOW WITH HAND WINDOW BROKE LACERATING EMPLOYEES LEFT HAND

EMPLOYEE ALLEGES TO HAVE INCURRED A HERNIA WHILE OPEARTING A LOADER.

EMPLOYEE ALLEGES HE WAS WALKING AND FELL WHILE CARRYING TOOLS.

EMPLOYEE ALLEGES HE SLIPPED ON ICE AND HURT HIS BACK. THIS ACCIDENT IS STILL UNDER INVESTIGATION AND MAY BE DETERMINED NOT TO BE A REPORTABLE ACCIDENT.

EMPLOYEE WAS HELPING TO UNLOAD A DRILL HAMMER FROM BED OF TRUCK & CAUGHT LEFT THUMB BETWEEN HAMMER & MAST FRAME. LEFT THUMB WAS LACERATED & BROKEN.

CUTTING TAPE OFF WATERWAYS. ONBQ INNER TUBE KNIFE SLIPPED CUTTING LEFT HAND.

EMPLOYEE WAS TUGGING ON PIPE WELDER AND HIT HER LEFT HAND BRUISING THE BACK AT THE HAND.

SCRAPER OPERATOR PARKED ON RAMP WAITING FOR PUSH CAT TO GET INTO POSITION. POSSIBLY LOWERED PAN TO GROUND RAISING REAR WHEELS. AFTER RELEASING BRAKES REAR OF SCRAPER SLID DOWN HILL & OPERATO R TURNED MACHINE UP-HILL CAUSING EQUIPMENT TO OVERTURN.

EMPLOYEE INJURED SMALL LACERATION ON LEFT HAND WHILE REPAIRING HEATER BOX ON HAUL TRUCK.

EE WAS USING A RAZOR KNIFE TO CUT THRU PLASTIC TUBING STROKE OF KNIFE WAS TOWARD HIMSELF INSTEAD OF ANGY FROM HIS BODY KNIFE WENT THRU TUBING UNEXPECTEDLY AND CUT EE S LEFT FOREARM CUT REQUIRE D SIX STITCHES.

STEPPED ON UNSECURED PIECE OF GRATING WHILE DOING AN INSPECTION. GRATING POPPED UP AND HIT EMPLOYEE IN MOUTH.

THE EMPLOYEE WAS USING A WRENCH TO REMOVE A WIRE LOOM CLAMP FROM THE CAT 220 LOADER. THE WRENCH SLIPPED CAUSING HIM TO STRIKE HIS HAND AGAINST THE OIL SENDING UNIT WHICH CAUSED A SMALL LACERAT ION REQUIRING 3 SUTURES.

38580WERE TRIPPING DRILL PIPE OUT OF THE HOLE AND SENT THE PIPE DOWN THE SLIDE WHEN IT APPARENTLY HUNG UP. THE PIPE BROKE FREE AND HIT HIS SHOULDER.

CLIMBING TO TRUCK USING ON E HAND FELL ON GROUND

REMOVING THE FUEL HOSE FROM THE GRADER,THE COUPLER STUCK IN OPEN POSITION CAUSING THE OPERATOR TO BE SPRAYED WITH DIESEL FUEL.SOME OF THE SPRAY GOT INTO THE EMPL EYES.

THE EMPLOYEE SLIPPED AND FELL ON A BROKEN METAL SIGN POST WITH HIS KNEE CAUSING A SMALL PUNCTURE WOUND. HE REPORTED THE INJURY BUT FELT IT WAS INSIGNIFICANT AND REFUSED TO SEE THE EMT OR GOT T O THE CLINIC. APPROX. 3 WEEKS LATER HE BEGAN TREATMENT FOR INFECTION OF THE WOUND.

TWO EMPLOYEES WERE REMOVING THE CEMENT FEEDER FROM SERVICE TO REPAIR IT THE FEEDER (150 LBS) WAS UNBOLTED AND BOTH EMPLOYEES WERE SLIDING IT OUT WHEN ONE EMPLOYEE LOST HIS GRIP ALLOWING THE FE EDER TO DROP TO THE GRATING CATCHING HIS FINGER BETWEEN THE GRATING AND THE FEEDER.

REMOVING PIN FROM BUCKET TOOTH OF LOADER PUNCH HAMMER CHIPPED OFF AND WAS EMBEDDED IN THE EMP R HAND BEHIND THE INDEX KNUCKLE A SM INCISION

WHILE OPERATING A DOZER THE EMPLOYEE ATTEMPTED TO CLOSE THE CAB WINDOW. THE WINDOW APPEARED TO BE STUCK. THE EMPLOYEE FREED THE WINDOW AND IN THE PROCESS CAUGHT HIS LEFT INDEX FINGER IN THE WI NDOW AS IT CLOSED. THIS CAUSED A CONTUSION AND LACERATION WHICH REQUIRED 3 SUTURES.

EE STRAINED BACK WHILE LIFTING THE PAN FROM THE SAMPLE SPLITTER IN THE LABORATORY. EE USED IMPROPER LIFTING TECHNIQUES AND WAS WORKING VARY QUICKLY.

EMPL STRAINED BACK WHEN HE BENT OVER TO PICK UP SAMPLE BAG FULL OF DRILL CUTTINGS & DUMP IT INTO SPLITTER.

THE INJURED EMPLOYEE WAS LIFTING A PORTABLE POWER DISTRIBUTION BOX INTO THE BACK OF A PICKUP AND LOST CONTROL OF THE LOAD.HE MOVED HIS ARM QUICKLY TO REESTABLISH HIS GRIP,SCRAPING HIS FOREARM AGAINST A SHARP MOUNTING BRACKET CAUSING A DEEP LACERATION THAT REQUIRED SIX SITICHES.

TRANSP CAT OVER FILL ON ROUGH GROUND BOUNCED IN SEAT STRUCK HARD HAT STRUCK HEAD AGAINST CAB

THE DRILL OPERATOR LIFTED THE LID OF THE DRILL TOOLBOX SUPPORTING IT WITH HIS LEFT HAND WHILE TRYING TO RETRIEVE A SCREWDRIVER WITH HIS RIGHT HAND. A CHAIN WRENCH NEEDED TO BE REMOVED TO GET T O THE SCREWDRIVER. HE REMOVED HIS LEFT HAND FROM THE LID TO MOVE THE CHAIN WRENCH. THE LID DROPPED AND HE WAS UNABLE TO CLEAR BOTH HANDS. THE LID FELL ON HIS LEFT RING FINGER. STITCHES REQUIR

EMPLOYEE WAS HELPING A FELLOW EMPLOYEE LIFT A 200 POUND VIBRATING FEEDER OFF OF A FLATBED WHEN HE SLIPPED HE STRAINED A LOWER LUMBAR MUSCLE IN HIS BACK.

WHILE REMOVING A CONVEYOR BELT SCRAPER DURING REGULAR MAINTENANCE,THE EMPLOYEE PULLED ON THE SCRAPER TO REMOVE IT AND PINCHED HIS FINGER BETWEEEN THE SCRAPER AND CONVEYOR HOPPER.THIS INJURY WA S INTITIALLY TREATED AS A FIRST AID.X-RAYS WERE NEGATIVE.ON 01-14-91 THE EMPLOYEE RETURNED SINCE THE INJURY HAD NOT HEALED.THE FINGER WAS IMMOBILIZED.

WATER TRUCK PARKED ON STEEP ICY HILL.EMPLOYEE WAS OUT SHOVELING DIRT ON THE ICE TO MAKE IT POSSIBLE TO DRIVE THE TRUCK.HE SLIPPED ON THE ICE AND JAMMED HIS FINGER.

UNLOADING PLANKS AND RODS OFF WATER TRUCK. EE SLIPPED AND FELL BACKWARDS.

I.NAME SHAKING ORE ON BLASTED MATERIAL ON 6420 LEVEL.SLID ON LOOSE MATERIAL PUT RIGHT HAND DOWN TO CATCH HIMSELF INJURING RIGHT WRIST.

ASCENDING EQUIP LADDER WITH LUNCHBOX IN HAND.EMPL SLIPPED,DURING FALL LEFT FOOT CAUGHT IN LADDER STRAINING KNEE.IF BOTH HANDS HAD BEEN FREE TO GRIP HANDRAIL INCIDENT MAY HAVE BEEN PREVENTED.

POSSIBILITY OF ORE DUMP UNDERCUT BY FRONT END LOADER. IMPROPER INSPECTION OF ORE DUMP. FAILURE TO DUMP BACK AWAY FROM EDGE.

OPER HAUL TRUCK ATTMEPTED TO SILENCE RATTLING DOOR ON TRUCK BY CLOSING DOOR ON CLOTH WHEN HE SLAMMED TRUCK DOOR HIS FINGERS WERE SMASHED.

AN UNSECURED TANK LID (WEIGHING 50+POUNDS) WAS PROPPED OPEN TO ACCOMIDATE A 4IN PRODUCT HOSE WHILE THE EMPLOYEE ATTEMPTED TO LIFT THE HOSE HIGH ENOUGH TO RETRIEVE A SAMPLE THE LID WAS JARRED E NOUGH TO CAUSE IT TO FALL THE EMPLOYEE CAUGHT HIS THUMB & PRODUCT HOSE UNDER THE LID

HAUL TRUCK 50 TONS CAT.

EMPLOYEE WAS HELPING DRILL OPERATOR CHANGE DRILL BITS.WHILE ATTACHING HYDRAULIC RAM TO CHAIN WRENCH OPERATOR MOVED THE LEVER CONTROLLING RAM,CAUSING WRENCH TO PRESS FINGER BETWEEN DRILL STEEL AND WRENCH.INJURY LIMITED TO BRUSING OF 1ST PHALANGE R MIDDLE FINGER.

FLOOR JACK PLACE DUNDER PAN BUT WHEN IT FAILED TO BREAK LOOSE THE JACK REMVOED PAN BROKE LOOSE SWUNG DOWN INJ EMP R HAND PALM AND L FOREARM

EMPLOYEE WAS LIFTING FROZEN CHUNKS OF BELT SPILLAGE FROM AROUND A CONVEYOR BELT WHEN HE STRAINED HIS LOWER BACK EMPLOYEE DIDNT REPORT ACCIDENT UNTIL CONDITION WORSENED & WAS GIVEN PRESCRIPTION MEDICATION FOR STRAIN

EMPL DRILLING BLAST HOLES WITH DRILL.EMPL STEPPED OUT OF CAB ONTO STAIRS WHEN STAIRS BROKE LOOSE.EMPL FELL 5' BRUISING HIS BACK AND SHOULDER.

EMPL WAS SHOVELING AROUND CONVEYOR WHEN SHOVEL WAS CAUGHT BETWEEN PULLEY & BELT. SHOVEL HANDLE RFORCED LEFT HAND AGAINST CONVEYOR. EMPL SUSTAINED FRACTURE OF LEFT INDEX FINGER.

CLEANING AROUND TAIL PULLEY OF MOBILE CONVEYOR WHEN SHOVEL GOT CAUGHT IN PULLEY CAUSING SHOVEL HANDLE TO STRIKE EMPL RIGHT ARM.EMPL HAD REMOVED GUARD TO ACCESS TAIL PULLEY.

MAINTENANCE TECH WAS LIFTING CONVEYING IDLERS FROM A STORAGE PALLET INTO A PICKUP TRUCK. HIS BOOT CAUGHT ON EITHER THE PALLET OR ANOTHER IDLER CAUSING HIM TO TRIP & FALL SPRAINING HIS RIGHT AN KLE. EMPL. WAS SENT TO CLINK ON NOV.8 (SWELLING OCCURRED) GIVEN MEDICATION FOR SWELLING & SENT HOME.

A LABORER WAS SHOVELING SPILLAGE FROM AROUND A CONVEYOR ON NOV. 2, 1989. ON NOV. 3, 1989 HE NOTICED HIS RIGHT ARM WAS SWOLLEN AND WAS SENT TO TEH COMPANY CLINIC FOR DIAGNOSIS. HE RECEIVED PR ESCRIPTION MEDICATION TO REDUCE THE SWELLING.

CUTTING A PLASTIC TIE WHICH WAS HOLDING HOSE TOGETHER WHEN KNIFE PASSED BETWEEN HOSE AND CUT RIGHT HAND BETWEEN THUMB AND INDEX FINGER. HAND WAS STICHED AT COMPANY CLINIC.

EMPLOYEE WAS SHOVELING AROUND CONVEYOR WHEN HE JAMMED HIS RT WRIST AGAINST SHOVEL HANDLE SPRAINING HIS RT THUMB PRESCRIPTION MEDICATION WAS ADMINISTERED TO EMPLOYEE TO REDUCE SWELLING

CARPENTERS LAYING FLOOR DECKING ON FLOOR JOISTS SUSPENDED 3'6". PLACED FOOT ON TOP OF 2' JOIST. WIND GUST CAUGHT 4X8 PANEL CAUSING LOSS OF BALANCE. SLIP (FELL THROUGH).

EMPLOYEE WAS REMOVING A DOZER RIPPER TIP WHEN A PICE OF THE TIP CHIPPED AND STRUCK HIM IN HIS LEFT LEG,LACERATING LEG AND IMBEDDING METAL CHIP IN CALF MUSCLE.EMPLOYEE WAS USING IMPROPER PROCED URE.ADDITIONAL TRAINING WAS GIVEN TO ALL EMPLOYEES.METAL CHIP WAS REMOVED FROM LEG,BANDAGED MEDICATION GIVEN TO EMPLOYEES TO PREVENT INFECTION.

WAS HANDLING SHEET METAL WHEN RIGHT HAND SLIPPED ON ICE AND SNOW ON SHEET. LACERATION RIGHT FIRST FINGER.

WAS SHOVELING FOR LONG PERIOD OF TIME WHEN BEGAN TO FEEL PAIN IN LEFT ELBOW.

WAS OPERATING SCRAPER WHEN HIT DEEP RUT CAUSING SEAT TO BOTTOM OUT INJURING LOWR BACK.

HELPING TRIP OUT OF A HOLE WHEN A FLIPPER BROKE OFF AND FELL AND HIT ME ON TOP OF THE HEAD THE WELD BROKE WHICH MADE THE FLIPPER FALL.