Employee was removing rock from conveyor belt in pit. Rock slipped out of hand and smashed tip against conveyor frame causing tip of finger on left hand to swell.
King George Mine: 116 MSHA citations Metal/Non-Metal
King George Mine has $22K in proposed MSHA penalties and $120 outstanding across 2 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at King George Mine.
- Fatalities
- 0
- Total incidents
- 16
- Years on record
- 1988–2007
- Latest incident
- Jul 2007
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.King George Mine has $22K in proposed MSHA penalties and $120 outstanding across 2 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.ⓘ
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.- Settled 5 · 100%
ⓘ
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.ⓘ
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.| Docket | Decision | Judge | Year | Proposed / upheld |
|---|---|---|---|---|
| VA 2008-43M | Settlement | Weisberger | 2008 | $2K → $862 |
| VA 2004-59 | Settlement | Weisberger | 2005 | $1K → $500 |
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Metal and nonmetal contaminants (personal samples)
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2012-07-25, 14 years ago
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.- Respirable dust, <.1mg15
- Quartz, respirable, >1% Qtz8
- Unlisted Particulate, respirable, <1% Qtz3
Show the individual readings (26)
| Date | Contaminant | Concentration | Limit | Conc / limit | Occupation |
|---|---|---|---|---|---|
| 2012-07-25 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2012-07-25 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2012-07-25 | Unlisted Particulate, respirable, <1% Qtz | 0.24 | Front-end Loader Operator | ||
| 2010-03-11 | Quartz, respirable, >1% Qtz | 0.51 | 2.73 | 0.19 | Front-end Loader Operator |
| 2010-03-11 | Quartz, respirable, >1% Qtz | 0.31 | 1.82 | 0.17 | Front-end Loader Operator |
| 2010-03-11 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2010-03-11 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2010-03-11 | Quartz, respirable, >1% Qtz | 0.36 | 0.37 | 0.97 | Front-end Loader Operator |
| 2005-08-31 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker | ||
| 2005-08-31 | Respirable dust, <.1mg | 0 | Cleanup Man | ||
| 2005-08-31 | Respirable dust, <.1mg | 0 | Cleanup Man | ||
| 2005-08-31 | Quartz, respirable, >1% Qtz | 0.32 | 0.87 | 0.37 | Laborer, Bullgang |
| 2005-08-31 | Quartz, respirable, >1% Qtz | 0.26 | 0.64 | 0.41 | Laborer, Bullgang |
| 2004-04-28 | Quartz, respirable, >1% Qtz | 0.16 | 0.65 | 0.25 | Washer Operator |
| 2004-04-28 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2004-04-28 | Quartz, respirable, >1% Qtz | 0.34 | 0.92 | 0.37 | Laborer, Bullgang |
| 2004-04-28 | Respirable dust, <.1mg | 0 | Laborer, Bullgang | ||
| 2003-07-02 | Respirable dust, <.1mg | 0 | Screen/Scalper Operator | ||
| 2003-07-02 | Unlisted Particulate, respirable, <1% Qtz | 0.36 | Front-end Loader Operator | ||
| 2003-07-02 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2003-07-02 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2000-12-12 | Quartz, respirable, >1% Qtz | 0.75 | 1.12 | 0.67 | Screen/Scalper Operator |
| 2000-12-12 | Respirable dust, <.1mg | 0 | Mobile Crane Operator | ||
| 2000-12-12 | Unlisted Particulate, respirable, <1% Qtz | 0.24 | Front-end Loader Operator | ||
| 2000-12-12 | Respirable dust, <.1mg | 0 | Supervisor, Co. Official | ||
| 2000-12-12 | Respirable dust, <.1mg | 0 | Front-end Loader Operator |
King George Mine recorded 0.00 reportable injury cases per 100 full-time workers in 2012.
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2012 * | 0.00 | 0.00 | 0.000 |
| 2010 * | 0.00 | 0.00 | 0.000 |
| 2009 * | 0.00 | 0.00 | 0.000 |
| 2008 * | 0.00 | 0.00 | 0.000 |
| 2007 * | 7.23 | 0.00 | 0.000 |
| 2006 * | 0.00 | 0.00 | 0.000 |
| 2005 * | 16.21 | 0.00 | 0.000 |
| 2004 * | 9.12 | 0.00 | 0.000 |
- Solite Corp 1950 to 1997
- Mid-Atlantic Materials Inc 1997 to 2011
- Aggregate Industries 2011 to 2023
- Farley Vale LLC 2023 to present
| Year | Employees |
|---|---|
| 2014 | 6 |
| 2013 | 9 |
| 2012 | 13 |
| 2011 | 10 |
| 2010 | 10 |
| 2009 | 11 |
| 2008 | 13 |
| 2007 | 14 |
| 2006 | 22 |
| 2005 | 21 |
| 2004 | 22 |
| 2003 | 23 |
| 2002 | 21 |
| 2001 | 19 |
| 2000 | 14 |
King George Mine sits in King George County, Virginia, where the Census mining category is 0.0% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2014 Q1 | 627 | 0 | 0 | 0.0 |
| 2013 Q3 | 1,198 | 0 | 0 | 0.0 |
| 2013 Q2 | 3,491 | 0 | 0 | 0.0 |
| 2013 Q1 | 7,521 | 0 | 0 | 0.0 |
| 2012 Q4 | 6,154 | 2 | 1 | 325.0 |
| 2012 Q3 | 7,059 | 2 | 1 | 283.3 |
| 2012 Q2 | 7,805 | 0 | 0 | 0.0 |
| 2012 Q1 | 8,520 | 2 | 0 | 234.7 |
Show 48 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2011 Q4 | 5,549 | 0 | 0 | 0.0 |
| 2011 Q3 | 4,030 | 0 | 0 | 0.0 |
| 2011 Q2 | 4,220 | 7 | 1 | 1658.8 |
| 2011 Q1 | 4,910 | 0 | 0 | 0.0 |
| 2010 Q4 | 4,318 | 9 | 3 | 2084.3 |
| 2010 Q3 | 4,766 | 0 | 0 | 0.0 |
| 2010 Q2 | 5,303 | 0 | 0 | 0.0 |
| 2010 Q1 | 6,184 | 2 | 0 | 323.4 |
| 2009 Q4 | 6,262 | 1 | 0 | 159.7 |
| 2009 Q3 | 6,482 | 0 | 0 | 0.0 |
| 2009 Q2 | 6,821 | 0 | 0 | 0.0 |
| 2009 Q1 | 6,998 | 3 | 0 | 428.7 |
| 2008 Q4 | 7,123 | 0 | 0 | 0.0 |
| 2008 Q3 | 7,736 | 0 | 0 | 0.0 |
| 2008 Q2 | 8,414 | 7 | 2 | 831.9 |
| 2008 Q1 | 7,908 | 1 | 0 | 126.5 |
| 2007 Q4 | 6,124 | 0 | 0 | 0.0 |
| 2007 Q3 | 7,454 | 4 | 1 | 536.6 |
| 2007 Q2 | 6,964 | 0 | 0 | 0.0 |
| 2007 Q1 | 7,134 | 5 | 0 | 700.9 |
| 2006 Q4 | 12,014 | 0 | 0 | 0.0 |
| 2006 Q3 | 13,818 | 0 | 0 | 0.0 |
| 2006 Q2 | 13,818 | 2 | 0 | 144.7 |
| 2006 Q1 | 12,763 | 3 | 1 | 235.1 |
| 2005 Q4 | 12,891 | 0 | 0 | 0.0 |
| 2005 Q3 | 13,305 | 10 | 1 | 751.6 |
| 2005 Q2 | 12,692 | 0 | 0 | 0.0 |
| 2005 Q1 | 10,473 | 4 | 1 | 381.9 |
| 2004 Q4 | 13,495 | 0 | 0 | 0.0 |
| 2004 Q3 | 14,832 | 0 | 0 | 0.0 |
| 2004 Q2 | 3,321 | 8 | 2 | 2408.9 |
| 2004 Q1 | 12,211 | 0 | 0 | 0.0 |
| 2003 Q4 | 12,912 | 10 | 3 | 774.5 |
| 2003 Q3 | 12,655 | 8 | 3 | 632.2 |
| 2003 Q2 | 15,290 | 0 | 0 | 0.0 |
| 2003 Q1 | 12,672 | 3 | 1 | 236.7 |
| 2002 Q4 | 11,100 | 0 | 0 | 0.0 |
| 2002 Q3 | 12,040 | 2 | 2 | 166.1 |
| 2002 Q2 | 10,450 | 0 | 0 | 0.0 |
| 2002 Q1 | 12,246 | 1 | 0 | 81.7 |
| 2001 Q4 | 12,595 | 0 | 0 | 0.0 |
| 2001 Q3 | 13,008 | 2 | 1 | 153.8 |
| 2001 Q2 | 14,766 | 0 | 0 | 0.0 |
| 2001 Q1 | 9,040 | 0 | 0 | 0.0 |
| 2000 Q4 | 8,723 | 4 | 0 | 458.6 |
| 2000 Q3 | 8,743 | 0 | 0 | 0.0 |
| 2000 Q2 | 9,564 | 6 | 1 | 627.4 |
| 2000 Q1 | 7,598 | 0 | 0 | 0.0 |
Reportable incidents
16 on file2007 · 1 incident
2005 · 4 incidents
EMPLOYEE WAS CHANGING CUTTING EDGE ON LOADER. ONE OF THE BOLTS BEGAN TURNING, HE TRIED TO HOLE BOLT UP WITH HAND AND TURN IT WITH THE IMPACT WRINCH. BOLT TURNED AND CUT LEFT HAND
Employee was lowering pump into hole with a cable that was overlapped and the cable let loose jerking employee's arm.
EE needed oil for loader-He stepped up into oil shed, had a misstep and kicked side of step twisting left knee which resulted in severe pain.
Employee was starting up gravel shaker. He swung his right arm around, striking middle finger against metal object tearing off part of finger nail. Remainder of nail had to be removed and nail bed stitched.
2004 · 3 incidents
EE WAS WEEDEATING AROUND TUNNELS AND FUEL TANKS WHEN HE CAME IN CONTACT WITH POISON IVY.
Crane was running hot, employee took radiator cap off to check water level, it blew back causing burn to right arm.
EE WAS REINSTALLING BELT ON CONVEYER LINE. FOREIGN OBJECT BLEW INTO LEFT EYE. HE WAS WEARING PROPER SAFETY GLASSES. HE ALSO ATTEMPTED TO FLUSH EYE OUT.
2000 · 1 incident
EE WAS BENDING DOWN GREASING A TAIL PULLEY BEARING AND WHEN HE STOOD UP EXPERIENCE MUSCLE RELATED NECK PAIN.
1996 · 1 incident
WHITE CLIMBING A PLANT BELT, SLIPPED AND HIT RIGHT KNEE AGAINST ANGLE IRON.
1995 · 2 incidents
EE WAS USING A CHISEL AND HAMMER TO PRY HUB FROM PULLEY, WHILE HITTING THE CHISEL WITH A HAMMER, HE MISSED THE CHISEL AND HIT HIS LEFT THUMB WITH THE HAMMER.
SUBJECT HUNG FOOT IN ONE CONCRETE FORM CAUSING HIM TO FALL AND FRACTURE HIS THUMB.
1993 · 1 incident
SUBJECT WAS USING A SOCKET WRENCH AND RATCHET SOCKET SLIPPED OFF NUT AND STRUCK INJURED RIGHT GHEEK BONE RESULTING IN A SMALL SHOALLOW CUT APPROX. 3/8 LONG.
1991 · 1 incident
GETTING OFF LOADER AND SLIPPED OFF THE STEP;RIGHT AHND HIT THE DOOR CLOSING IT ON THE LEFT THUMB.
1989 · 1 incident
OUTBOARD BEARING HOUSING ON DRUM SHAFT BROKE PUTTING ALL OF THE CABLE FORCE ON THE BRAKE DRUM, WHICH CAUSED THE BRAKE PEDAL TO KICK BACK FORCING THE OPERATORS FOOT AND LEG AGAINST THE OPERATOR 'S SEAT.
1988 · 1 incident
USING A PRY BAR TO CLOSE A RAILROAD CAR DOOR, THE BAR SLIPPED AND STRUCK HIS FOOT. FRACTURE- RIGHT ANKLE.