citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 290 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
KW Crushing has $5K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$5K
proposed penalties
$5K
current assessed
$5K
paid to date
$0
outstanding
27 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2025-03-13.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Metal and nonmetal contaminants (personal samples)
ⓘMany samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2023-06-21, 3 years ago
0%
of limit-tested samples over the exposure limit
8
samples
4
limit-tested
Most sampled contaminants
Quartz, respirable, >1% Qtz4
Respirable dust, <.1mg4
Show the individual readings (8)
Date
Contaminant
Concentration
Limit
Conc / limit
Occupation
2023-06-21
Respirable dust, <.1mg
0
Front-end Loader Operator
2014-12-03
Quartz, respirable, >1% Qtz
0.17
0.51
0.33
Front-end Loader Operator
2014-12-03
Quartz, respirable, >1% Qtz
0.15
0.33
0.45
Crusher Oper/Worker
2011-12-22
Respirable dust, <.1mg
0
Supervisor, Co. Official
2011-12-22
Quartz, respirable, >1% Qtz
0.18
0.67
0.27
Crusher Oper/Worker
2011-12-22
Respirable dust, <.1mg
0
Front-end Loader Operator
2009-04-08
Quartz, respirable, >1% Qtz
0.16
0.55
0.29
Front-end Loader Operator
2009-04-08
Respirable dust, <.1mg
0
Front-end Loader Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year
Employees
2026
3
2025
2
2024
3
2023
2
2022
2
2021
2
2020
2
2019
3
2018
4
2017
4
2016
3
2015
4
2014
4
2013
4
2012
4
2011
4
2010
5
2009
5
2008
4
2007
0
Source: MSHA quarterly employment and production, updated weekly.
KW Crushing sits in Uintah County, Utah, where the Census mining category is 12.5% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Uintah County, Utah · Population 36,458
12.5%
Mining share of county employment
$69,861
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Employee was operating Gehl Forklift to move crushing equipment at the Pit when forklift tipped onto side. Window broke, causing a cut to the employee's hand
2011 · 1 incident
April 25, 2011UT · Metal/Non-Metalbulldozer operator, universal operator, heavy equipment operator, operating engineerHANDLING OF MATERIALS
KW Crushing · Over-exertion in pulling or pushing objects
He was working to put a drive belt back on a motor and said he was pulling on the motor to get a bolt in place when he hurt his arm/tore a muscle. A re-injury to the same arm from 2 years prior that was done on personal time.