Mining Incidents

LITCHFIELD PLANT: 13 MSHA citations Metal/Non-Metal

CalMat Co · Surface
Controlled by Vulcan Materials Company
Mesa, Maricopa County, AZ  ·  Abandoned
MSHA Mine ID: 0201317

LITCHFIELD PLANT has $2K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at LITCHFIELD PLANT.

Fatalities
0
Total incidents
12
Years on record
1987–2007
Latest incident
Feb 2007
Compliance record
MSHA citations since 2000
13
citations
3
significant & substantial
$2,165
proposed penalties
$2,165
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
16
inspections on record
229
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 229 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

LITCHFIELD PLANT has $2K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$2K
proposed penalties
$2K
current assessed
$2K
paid to date
$0
outstanding
13 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2011-02-17.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
23.1%
significant & substantial
7.7%
high negligence or reckless
23.1%
reasonably likely or greater
76.9%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 30.8% low, 61.5% moderate, 7.7% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2004-09-08, 21 years ago
3
samples
0
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg3
Show the individual readings (3)
Date Contaminant Concentration Limit Conc / limit Occupation
2004-09-08 Respirable dust, <.1mg 0 Truck Driver
2004-09-08 Respirable dust, <.1mg 0 Crusher Oper/Worker
2004-09-08 Respirable dust, <.1mg 0 Front-end Loader Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

LITCHFIELD PLANT recorded 0.00 reportable injury cases per 100 full-time workers in 2009.

Injury rate, 2009
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 2.82 and the all-US-mining average was 3.36 cases per 100 workers.
In Arizona, metal and nonmetal mining averaged 2.88 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2009 * 0.00 0.00 0.000
2008 * 0.00 0.00 0.000
2007 * 5.50 0.00 0.000
2006 * 0.00 0.00 0.000
2005 * 0.00 0.00 0.000
2004 * 5.69 5.69 0.000
2003 * 0.00 0.00 0.000
2002 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Allied Concrete Inc 1950 to 1986
  2. Calmat Company Of Arizona 1987 to 1999
  3. Calmat Company Of Arizona 1999 to 2004
  4. CalMat Co 2004 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2012 0
2011 0
2010 1
2009 15
2008 15
2007 15
2006 14
2005 13
2004 14
2003 12
2002 9
2001 11
2000 13
Source: MSHA quarterly employment and production, updated weekly.

LITCHFIELD PLANT sits in Maricopa County, Arizona, where the Census mining category is 0.2% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Maricopa County, Arizona · Population 4,491,987
0.2%
Mining share of county employment
$85,518
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2012 Q1 0 0 0
2011 Q4 0 0 0
2011 Q3 0 0 0
2011 Q2 0 0 0
2011 Q1 0 1 0
2010 Q4 0 0 0
2010 Q2 191 0 0 0.0
2010 Q1 221 0 0 0.0
Show 40 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2009 Q4 3,440 1 0 290.7
2009 Q3 5,076 0 0 0.0
2009 Q2 8,154 1 0 122.6
2009 Q1 7,373 0 0 0.0
2008 Q4 7,823 0 0 0.0
2008 Q3 8,365 0 0 0.0
2008 Q2 9,365 0 0 0.0
2008 Q1 8,533 0 0 0.0
2007 Q4 8,559 0 0 0.0
2007 Q3 9,661 0 0 0.0
2007 Q2 9,285 0 0 0.0
2007 Q1 8,866 1 1 112.8
2006 Q4 6,659 0 0 0.0
2006 Q3 7,969 0 0 0.0
2006 Q2 9,111 0 0 0.0
2006 Q1 10,458 0 0 0.0
2005 Q4 8,257 0 0 0.0
2005 Q3 7,777 0 0 0.0
2005 Q2 8,046 0 0 0.0
2005 Q1 8,637 0 0 0.0
2004 Q4 8,278 0 0 0.0
2004 Q3 9,604 0 0 0.0
2004 Q2 9,404 1 0 106.3
2004 Q1 7,838 0 0 0.0
2003 Q4 8,601 0 0 0.0
2003 Q3 8,248 0 0 0.0
2003 Q2 7,624 0 0 0.0
2003 Q1 6,966 2 1 287.1
2002 Q4 6,572 0 0 0.0
2002 Q3 5,890 0 0 0.0
2002 Q2 6,148 0 0 0.0
2002 Q1 5,792 0 0 0.0
2001 Q4 5,755 0 0 0.0
2001 Q3 6,571 0 0 0.0
2001 Q2 7,102 0 0 0.0
2001 Q1 6,913 0 0 0.0
2000 Q4 5,832 0 0 0.0
2000 Q3 6,912 6 1 868.1
2000 Q2 8,720 0 0 0.0
2000 Q1 7,637 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

12 on file

2007 · 1 incident

February 19, 2007 AZ · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
CalMat Co · Struck by falling object

Bolt dropped unexpectedly, bounced striking left hand and slicing the thumb through the glove.

2004 · 1 incident

December 16, 2004 AZ · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
CalMat Co · Over-exertion in lifting objects

Employee was replacing paddle hubs in blade mill. While lifting and moving hub on shaft he allegedly strained back. Employee went home at end of shift. He was transported from his home to the E.R. on the morning of December 16th, complaining of severe back pain. He was diagnosed with a strained back muscle.

2000 · 1 incident

November 8, 2000 AZ · Metal/Non-Metal mine manager, mine foreman, mine owner POWERED HAULAGE
Calmat Company Of Arizona · Caught in, under or between a moving and a stationary object

REPLACING TROUGHING ROLLER ON PIT BELT #6. ROLLER WAS STUCK. REACHED BEHIND ROLLER AND ROLLER WENT INTO BRACKET, SMASHING LEFT INDEX FINGER.

1999 · 3 incidents

November 15, 1999 AZ · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Calmat Company Of Arizona · Fall on save level, (Not Elsewhere Classified)

STEPPED ON ROCK WHEN GETTING OUT OF TRUCK.

1998 · 1 incident

June 9, 1998 AZ · Metal/Non-Metal welder (shop) MACHINERY
Calmat Company Of Arizona · Contact with hot objects or substances

WHILE CUTTING WITH TORCH SLAG, EMPLOYEE BURNED THROUGH PANTS AND BOOT BURNING LEFT FOOT.

1997 · 3 incidents

November 13, 1997 AZ · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator POWERED HAULAGE
Calmat Company Of Arizona · Struck by... (Not Elsewhere Classified)

EMPLOYEE WAS CHECKING V-BELTS WHEN HE WAS STRUCK-BY A V--BELT GUARD.

October 28, 1997 AZ · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
Calmat Company Of Arizona · Over-exertion in lifting objects

EE WAS LOADING A HOSE ONTO A PICK UP TRUCK WHEN HE STRAINED HIS BACK.

March 25, 1997 AZ · Metal/Non-Metal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Calmat Company Of Arizona · Struck against stationary object

STRUCK LEGS ON CONVEYOR FRAME WHILE PULLING ROCKS OFF CONVEYOR.

1995 · 1 incident

November 8, 1995 AZ · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
Calmat Company Of Arizona · Struck by... (Not Elsewhere Classified)

WHILE MAKING A CUT ON THE BELT END, THE KNIFE SLIPPED OUT OF THE CUT, AND CUT THE UPPER PART OF HIS RIGHT HAND.

1987 · 1 incident

May 1, 1987 AZ · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator POWERED HAULAGE
Calmat Company Of Arizona · Struck by flying object

EMPLOYEE GOT DUST/DIRT IN HIS EYES.