EE WAS THROWING TIMBERS FROM ALONG SIDE THE RIB TO THE PLACE WHERE THEY WOULD BE SET. HE SAYS THAT WHILE THROWING HE INJURED HIS LOWER BACK.
Mine No 10: 83 MSHA citations Coal
Mine No 10 has $8K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Mine No 10.
- Fatalities
- 0
- Total incidents
- 11
- Years on record
- 2001–2002
- Latest incident
- Apr 2002
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Mine No 10 has $8K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.MSHA sampling at Mine No 10 shows 80% of 124 respirable coal dust samples met the 1.5 mg/m3 standard.
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2002-04-23, 24 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.- CONTINUOUS MINER OPERATOR50
- TRACTOR OPERATOR/MOTORMAN19
- CONTINUOUS MINER HELPER10
Silica (quartz)
Last sampled: 2002-02-27, 24 years ago- CONTINUOUS MINER OPERATOR8
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2001-12-19, 24 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.- CONTINUOUS MINER OPERATOR1
- ROOF BOLTER (TWIN HEAD) (INTAKE SIDE)1
- ROOF BOLTER (TWIN HEAD) (RETURN SIDE)1
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.| Year | within 1.5 mg/m3 | samples |
|---|---|---|
| 2002 | 79% | 29 |
| 2001 | 80% | 95 |
| Year | silica avg (%) | samples |
|---|---|---|
| 2002 | 4.7 | 3 |
| 2001 | 5.0 | 13 |
Mine No 10 recorded 3.66 reportable injury cases per 100 full-time workers in 2001.
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.- Reedy Coal Company Inc 2000 to present
ⓘ
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.| Year | Employees | Coal produced (tons) |
|---|---|---|
| 2002 | 67 | 459,223 |
| 2001 | 65 | 891,197 |
| 2000 | 59 | 19,230 |
Mine No 10 sits in Letcher County, Kentucky, where the Census mining category is 3.5% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2002 Q3 | 36,955 | 0 | 0 | 0.0 |
| 2002 Q2 | 13,670 | 14 | 7 | 1024.1 |
| 2002 Q1 | 44,648 | 7 | 3 | 156.8 |
| 2001 Q4 | 42,017 | 10 | 4 | 238.0 |
| 2001 Q3 | 41,689 | 13 | 4 | 311.8 |
| 2001 Q2 | 40,205 | 12 | 4 | 298.5 |
| 2001 Q1 | 40,242 | 10 | 8 | 248.5 |
| 2000 Q4 | 6,015 | 9 | 6 | 1496.3 |
Reportable incidents
11 on file2002 · 4 incidents
A PILLAR FALL OCCURED ONT HE 001 PILLAR SECTION INT HE #6 ENTRY TRAPPING OUR 1415 JOY CONTINUOUS MINER. THE TOP WAS SHALE WITH MUTIPLE HILLSEAMS. THE MINER WAS RETREIVED AND NORMAL MINNING BEG AN. NO INJURIES OCCURED DURING THIS PERIOD.
A HILLSEAM MEASURING 6' HIGH-12'WIDE-30' LONG, FELL IN THE FACE OF THE #7 ENTRY. A COAL STREAK AT THE TOP OF THE FALL CONTRIBUTED TO THE COLLAPSE. THE AREA WAS CRIBBED AROUND THE AREA. NO INJU RIES OCCURRED DURING THIS INCIDENT.
A ROOF FALL MEASURING 6' HIGH 30' LONG & 20' WIDE FELL IN THE RETURN NETURAL 13 BREAKS OUT BY THE CO #4 HEAD-DRIVE. THE ROOF WAS LAMINATED SHALE WITH MULTIPLE MOUNTAIN SEAMS. NO INJURIES TO ME N OR MACHINE OCCURED.
2001 · 7 incidents
A ROOF FALL OCCURED INT HE #3 ENTRY DURING PILLAR EXTRACTION TRAPPING OUR CONTINOUS MINER. THE ENTRY HAD HIDDEN MOUNTAIN SEAMS ALLOWING THE ROOF TO COLLASPE. NO INJURIES OCCURED DURING THE FAL L AND OR REMOVAL OF THIS MINER. ALL SAFETY PERCAUSTIONS WERE EXERCISED DURING REMOVAL.
EE WAS UNLOADING TIMBERS FROM A SCOOP. WHEN HE APPARENTLY STRAINED HIS GROIN AREA.
A ROOF FALL OCCURRED ON THE 001 PILLAR SECTION ENTRAPPING OUR 1415 CONTINUOUS MINER. WE HAD BEGAN REMOVING PILLARS IN THE #7 ENTRY WHEN A SECTION OF ROOF COLLAPSED CATCHING THE MINER. NO INJUR IES OCCURRED IN THIS ACCIDENT.
EE WAS REMOVING ROCK FROM 1415 CM MINER WHEN A PIECE OF ROCK SLIPPED CATCHING HIS RIGHT THUMB AND INDEX FINGER BETWEEN THE MINER AND ROCK.
AT APPROX. 1:30 PM A ROOF FALL MEASURING 19' WIDE, 25' LONG AND 48" THICK FELL APPROX. 100' LEFT HANDED OF SPAD 389. NO INJURIES OCCURED IN THIS FALL.
AT APPROX. 2:00 PM A ROOF FALL MEASURING 20' WIDE AND 22' LONG AND 48" HIGH FELL 60' INBY SPAD #389 IN THE NO. 1 HEADING. THE ROOF STRATA WAS WEAK WITH A RIDER SEAM AT OR NEAR THE ANCHORAGE ZO NE. NO INJURIES OCCURED WITH THIS FALL.
A PIECE OF ROCK FELL FROM TOP, STIKING EE ON THE BACK OF NECK, HIS INJURIES WERE NOT SERIOUS AND IS EXPECTED TO RETURN TO WORK VERY SOON.