Naselle Quarry Metal/Non-Metal

Miner was doing clean up around the crusher. During which, miner turned and hit nose on a steel support beam that runs horizontally.

Miner was operating crusher haulage truck when a bee came in the window and stung the miner on the left side of the neck.

Employee was finishing hosing debris from the crusher. When EE went to roll the hose up to put it away, EE was stung on the right side of EE's neck by a bee.

The employee reported that they were coming out from under the jaw discharge belt area. Upon rising from a crouched walk to a standing position, they tripped on a rock and lost balance. In an attempt to regain balance they grabbed a hose attached to the sand screw and the resulting motion caused them to twist and strain the right shoulder and right hip.

While removing and installing screens at the crusher worker felt pain in left shoulder.

Worker stepped down from a conveyor belt employee was repairing and heard a popping sound in employee's right knee. Now the knee clicks when employee walks.

The EE was fueling up a highway dump truck when the EE fell off of the fuel station platform. The fueling system has a platform to stand on while turning on/off the fuel pump as well as reading gallons used. The platform is 16 1/2" tall 51 1/2" W and 24" deep. The EE stepped down from platform then stepped on an 8X8 block of wood. Wood shifted, EE fell onto pavement hit head/body.

The EE was tasked to drain the oil from a D9H Cat bulldozer. A metal barrel was placed to capture the falling oil underneath the drain plug on the pan of the equip. The EE proceeded to use a wrench to apply pressure in order to loosen the drain plug. When the plug broke free and turned, the EE's forearm jolted forward hitting the sharp edge of the oil catchment barrel. Cut forearm.

While employee was operating the machine lathe a piece of his clothing was caught on the spinning shaft of the lathe which pulled his arm into the machine breaking his arm.

As he and another worker were replacing the rollers on the conveyor on the stacker belt at the crusher, his left hand was pinched between the roller and the steel base it bolts to.

ON THE FOURTH TRIP OF THE DAY, THE TRUCK THAT WAS HAULING ROCK FROM THE QUARRY TO THE CRUSHER HAD A MALFUNCTION OF ITS BRAKES WHICH WHEN COMBINED WITH THE TRUCK BEING OUT OF GEAR OR COMING OUT OF GEAR, CAUSED THE DRIVER TO LOSE CONTROL. THE TRUCK WENT OFF A 25-30' EMBANKMENT, LANDING ON THE SWITCH HOUSE NEXT TO THE CRUSHER AND DESTROYING NEARLY ALL OF THE ELECTRICAL GEAR. THE DRIVE

WHILE CONVEYORS WERE BEING UNLOADED FROM A FLATBED TRAILER THE LOAD SHIFTED. AS HE WAS ATTEMPTING TO GET CLEAR OF THE LOAD IT STRUCK THE BACK OF HIS LEG OR FOOT AND FLIPPED HIM INTO THE AIR. H E LANDED ON HIS HEAD APPROX. 3 FEET FROM THE TRAILER AND SUSTAINED A FRACTURED SKULL AND COLLARBONE AND SEVERAL LACERATIONS.

WHILE DRAINING 9ADIATOR ON DUMPT TRACK USING INDEX & MIDDLE FINGER ON RIGHT HAND PULLED A FENDOR WHICH CAUSED SWELLING & NUM BNESS.