EMPLOYEE'S WERE CUTTING THE TOP OUT OF A 55 GAL.DRUM. AN EXPLOSION TOOK PLACE. THE DRUM WAS BEING CUT INSIDE OF A LOADER BUCKET.
No 2 Surface: 1 recorded fatality Coal
No 2 Surface has $76K in proposed MSHA penalties and $12K outstanding across 4 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at No 2 Surface.
- Fatalities
- 1
- Total incidents
- 72
- Years on record
- 1983–2014
- Latest incident
- Mar 2014
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.No 2 Surface has $76K in proposed MSHA penalties and $12K outstanding across 4 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.ⓘ
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.- Settled 15 · 88%
- Vacated or withdrawn 2 · 12%
ⓘ
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.ⓘ
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.| Docket | Decision | Judge | Year | Proposed / upheld |
|---|---|---|---|---|
| VA 2010-595 | Settlement | Koutras | 2011 | $6K → $3K |
| VA 2011-29 | Settlement | Tureck | 2011 | $6K → $2K |
| VA 2010-384 | Settlement | Koutras | 2011 | $5K → $2K |
| VA 2012-257 | Settlement | Rae | 2013 | $2K → $2K |
MSHA sampling at No 2 Surface shows 100% of 238 respirable coal dust samples met the 1.5 mg/m3 standard.
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2019-02-13, 7 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.ⓘ
The excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.- BULLDOZER OPERATOR85
- HIGHWALL DRILL OPERATOR57
- HIGHLIFT OPERATOR/FRONT END LOADER46
Silica (quartz)
Last sampled: 2018-07-06, 8 years ago- HIGHWALL DRILL OPERATOR11
- BULLDOZER OPERATOR10
- REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE1
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2018-02-21, 8 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.- BULLDOZER OPERATOR34
- HIGHLIFT OPERATOR/FRONT END LOADER29
- REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE21
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.| Year | within 1.5 mg/m3 | samples |
|---|---|---|
| 2019 | 100% | 4 |
| 2018 | 100% | 23 |
| 2017 | 100% | 10 |
| 2016 | 100% | 8 |
| 2014 | 100% | 11 |
| 2013 | 100% | 5 |
| 2012 | 100% | 10 |
| 2011 | 100% | 15 |
| 2010 | 100% | 9 |
| 2009 | 100% | 11 |
| 2008 | 100% | 8 |
| 2007 | 100% | 22 |
| 2006 | 100% | 12 |
| 2005 | 100% | 25 |
| 2004 | 100% | 24 |
| 2003 | 100% | 5 |
| 2002 | 100% | 10 |
| 2001 | 100% | 11 |
| 2000 | 100% | 15 |
| Year | silica avg (%) | samples |
|---|---|---|
| 2018 | 24.7 | 3 |
| 2017 | 9.1 | 1 |
| 2008 | 18.7 | 1 |
| 2007 | 27.5 | 3 |
| 2005 | 29.2 | 1 |
| 2004 | 26.5 | 5 |
| 2002 | 9.9 | 1 |
| 2001 | 21.6 | 4 |
| 2000 | 26.7 | 3 |
| Year | over PEL | samples |
|---|---|---|
| 2018 | 0% | 11 |
| 2017 | 0% | 3 |
| 2016 | 0% | 4 |
| 2014 | 0% | 10 |
| 2013 | 20% | 5 |
| 2012 | 0% | 10 |
| 2011 | 0% | 13 |
| 2010 | 0% | 5 |
| 2009 | 0% | 5 |
| 2007 | 10% | 10 |
| 2005 | 0% | 5 |
| 2004 | 0% | 10 |
| 2002 | 0% | 5 |
| 2001 | 20% | 5 |
| 2000 | 20% | 10 |
No 2 Surface recorded 11.13 reportable injury cases per 100 full-time workers in 2013.
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2013 * | 11.13 | 0.00 | 0.000 |
| 2012 | 1.35 | 0.00 | 0.000 |
| 2011 | 0.00 | 0.00 | 0.000 |
| 2010 * | 0.00 | 0.00 | 0.000 |
| 2009 * | 0.00 | 0.00 | 0.000 |
| 2008 | 2.45 | 1.23 | 0.000 |
| 2007 | 3.77 | 1.26 | 0.000 |
| 2006 | 2.89 | 2.89 | 0.000 |
- Twin Star Mining, Inc. 1974 to 2017
- CM Mining, LLC 2017 to present
ⓘ
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.| Year | Employees | Coal produced (tons) |
|---|---|---|
| 2017 | 5 | |
| 2016 | 7 | |
| 2015 | 8 | 2,485 |
| 2014 | 10 | 10,446 |
| 2013 | 16 | 55,547 |
| 2012 | 60 | 278,217 |
| 2011 | 48 | 242,583 |
| 2010 | 25 | 195,105 |
| 2009 | 27 | 205,775 |
| 2008 | 59 | 384,191 |
| 2007 | 57 | 421,509 |
| 2006 | 53 | 416,951 |
| 2005 | 55 | 404,309 |
| 2004 | 54 | 390,999 |
| 2003 | 55 | 406,282 |
| 2002 | 62 | 575,307 |
| 2001 | 61 | 617,010 |
| 2000 | 54 | 606,120 |
No 2 Surface sits in Buchanan County, Virginia, where the Census mining category is 11.2% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2017 Q3 | 2,330 | 0 | 0 | 0.0 |
| 2017 Q2 | 2,590 | 0 | 0 | 0.0 |
| 2017 Q1 | 2,770 | 1 | 0 | 361.0 |
| 2016 Q4 | 2,430 | 0 | 0 | 0.0 |
| 2016 Q3 | 2,923 | 0 | 0 | 0.0 |
| 2016 Q2 | 4,085 | 1 | 0 | 244.8 |
| 2016 Q1 | 4,302 | 3 | 1 | 697.4 |
| 2015 Q4 | 3,490 | 0 | 0 | 0.0 |
Show 63 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2015 Q3 | 4,617 | 0 | 0 | 0.0 |
| 2015 Q2 | 4,443 | 0 | 0 | 0.0 |
| 2015 Q1 | 4,308 | 4 | 1 | 928.5 |
| 2014 Q4 | 3,532 | 0 | 0 | 0.0 |
| 2014 Q3 | 4,687 | 0 | 0 | 0.0 |
| 2014 Q2 | 5,177 | 7 | 3 | 1352.1 |
| 2014 Q1 | 6,301 | 2 | 0 | 317.4 |
| 2013 Q4 | 6,647 | 0 | 0 | 0.0 |
| 2013 Q3 | 9,122 | 2 | 2 | 219.3 |
| 2013 Q2 | 9,736 | 0 | 0 | 0.0 |
| 2013 Q1 | 10,436 | 0 | 0 | 0.0 |
| 2012 Q4 | 9,470 | 16 | 8 | 1689.5 |
| 2012 Q3 | 39,279 | 0 | 0 | 0.0 |
| 2012 Q2 | 51,515 | 13 | 3 | 252.4 |
| 2012 Q1 | 47,451 | 0 | 0 | 0.0 |
| 2011 Q4 | 37,043 | 7 | 2 | 189.0 |
| 2011 Q3 | 38,536 | 0 | 0 | 0.0 |
| 2011 Q2 | 37,976 | 10 | 6 | 263.3 |
| 2011 Q1 | 29,562 | 8 | 0 | 270.6 |
| 2010 Q4 | 17,873 | 0 | 0 | 0.0 |
| 2010 Q3 | 18,664 | 10 | 4 | 535.8 |
| 2010 Q2 | 19,142 | 0 | 0 | 0.0 |
| 2010 Q1 | 17,183 | 11 | 7 | 640.2 |
| 2009 Q4 | 5,981 | 0 | 0 | 0.0 |
| 2009 Q3 | 6,139 | 8 | 0 | 1303.1 |
| 2009 Q2 | 6,081 | 0 | 0 | 0.0 |
| 2009 Q1 | 39,377 | 11 | 1 | 279.4 |
| 2008 Q4 | 40,767 | 0 | 0 | 0.0 |
| 2008 Q3 | 40,237 | 0 | 0 | 0.0 |
| 2008 Q2 | 40,309 | 9 | 3 | 223.3 |
| 2008 Q1 | 41,791 | 0 | 0 | 0.0 |
| 2007 Q4 | 38,765 | 5 | 1 | 129.0 |
| 2007 Q3 | 39,572 | 7 | 1 | 176.9 |
| 2007 Q2 | 38,807 | 0 | 0 | 0.0 |
| 2007 Q1 | 41,876 | 13 | 3 | 310.4 |
| 2006 Q4 | 33,820 | 0 | 0 | 0.0 |
| 2006 Q3 | 36,050 | 7 | 4 | 194.2 |
| 2006 Q2 | 33,382 | 0 | 0 | 0.0 |
| 2006 Q1 | 35,390 | 0 | 0 | 0.0 |
| 2005 Q4 | 30,637 | 6 | 2 | 195.8 |
| 2005 Q3 | 37,465 | 0 | 0 | 0.0 |
| 2005 Q2 | 36,232 | 6 | 1 | 165.6 |
| 2005 Q1 | 43,368 | 0 | 0 | 0.0 |
| 2004 Q4 | 37,078 | 4 | 0 | 107.9 |
| 2004 Q3 | 29,935 | 0 | 0 | 0.0 |
| 2004 Q2 | 40,345 | 4 | 3 | 99.1 |
| 2004 Q1 | 38,896 | 5 | 1 | 128.5 |
| 2003 Q4 | 39,886 | 0 | 0 | 0.0 |
| 2003 Q3 | 32,438 | 3 | 1 | 92.5 |
| 2003 Q2 | 27,782 | 2 | 0 | 72.0 |
| 2003 Q1 | 30,071 | 5 | 0 | 166.3 |
| 2002 Q4 | 36,126 | 2 | 0 | 55.4 |
| 2002 Q3 | 37,047 | 0 | 0 | 0.0 |
| 2002 Q2 | 47,689 | 2 | 0 | 41.9 |
| 2002 Q1 | 43,343 | 0 | 0 | 0.0 |
| 2001 Q4 | 44,529 | 2 | 0 | 44.9 |
| 2001 Q3 | 35,058 | 0 | 0 | 0.0 |
| 2001 Q2 | 40,727 | 2 | 1 | 49.1 |
| 2001 Q1 | 37,210 | 1 | 1 | 26.9 |
| 2000 Q4 | 33,761 | 1 | 0 | 29.6 |
| 2000 Q3 | 36,543 | 0 | 0 | 0.0 |
| 2000 Q2 | 32,093 | 0 | 0 | 0.0 |
| 2000 Q1 | 37,660 | 0 | 0 | 0.0 |
Fatalities at this mine
1 recordedReportable incidents
71 on file (excluding fatalities above)2014 · 1 incident
Employee was installing roller on D11 dozer, the roller slipped and caught employee's finger.
2013 · 2 incidents
Employee was diagnosed with moderate to severe sensorineural hearing loss in both ears on September 12, 2013. Company was not notified of this until February 6, 2014.
Claim of occupational noise exposure. Testing shows a degree of hearing loss.
2012 · 3 incidents
Employee was terminated on November 17, 2012 and filed a hearing loss claim. He was diagnosed on 2/26/14 with work related noise exposure. Company Safety Department was not notified until April 10, 2014 of diagnosis.
EE was operating a 785 rock truck when he became disorientated in the fog. He then drove out of the road, across a drill bench, through a berm and over a highwall landing in a shot. The truck then caught on fire and we were unable to extinguish the fire within 30 minutes. EE exited the truck without injury.
Stepped on rock covered with mud and slipped.
2008 · 2 incidents
EE was in the process of checking anitfreeze in a 992G Loader. He began to remove the radiator cap and hot anitfreeze came out, striking EE on the chest, stomach and left hand, resulting in a burn to his left hand and stomach.
777 Cat truck was loaded in pit, ground was soft and when truck started to pull out, front of truck raised up then came down hard and jarred operator, hurting neck and back.
2007 · 4 incidents
Employee had installed a bearing and it was crooked. Was trying to remove it, and while hitting it, he missed the bearing. He was in the process of trying to get his hand out of the way, when his finger struck a sharp object and cut his finger.
Employee was granted 10% award by the Occupational Pneumonconiosis Board.
EE was repairing a rear spring on a F250 pick up truck when the spring fell & struck his left index finger causing a laceration. He rec'd 8 stitches.
Employee was cutting out a blade liner on a D-11R dozer. The liner broke loose pushing him to the ground. His foot was under the blade and his foot was fouled when he began to move causing a break to his lower left leg (blade was on the ground; the ground was uneven where the work was being done).
2006 · 2 incidents
Employee was pushing in a shot. When he started to back up a rock came from the spoil and he backed up on it. When he started to tram off, the dozer slipped off causing a jolting action resulting in lower back pain. He continued to work until 10/21/06 at which time he bagan to miss work.
EE was starting to climb down the ladder of the 785B rock truck when he slipped and fell to the ground.
2005 · 1 incident
Employee was pushing in shot rock. Dozer D-11R he was operating kicked rock from under track causing machine to drop suddenly & resulting in back injury.
2004 · 1 incident
Truck driver backed under end loader with bucket raised and rock fell from bucket and hit in empty bed of truck.
2003 · 5 incidents
EE'S WERE CUTTING TOP OUT OF A 55 GALLON DRUM & AN EXPLOSION TOOK PLACE. THE DRUM WAS BEING CUT INSIDE LOADER BUCKET.
JOB MECHANIC WAS CUTTING BARREL WITH CUTTING TORCH & IT EXPLODED.
EE'S WERE CUTTING TOP OUT OF A 55 GALLON DRUM. AN EXPLOSION TOOK PLACE. THE DRUM WAS BEING CUT INSIDE OF A LOADER BUCKET.
EE WAS GOING UP A GRADE TO DRILL IN A FORD SERVICE TRUCK. THE MOTOR QUIT LETTING TRUCK ROLL BACK AGAINST BERM AND LAID OVER.
EE WAS WAITING ON GETTING LOADED BY A LOADER OPERATOR. THE LOADER OPERATOR WAS GOING TOWARDS THETRUCK WITH A BIG ROCK WHEN LOADER BUCKET DUMPED ON IT'S OWN AND THE ROCK HIT THE EDGE OF THE TRU CK CAUSING A JOLT.
2002 · 5 incidents
EE WAS CLIMBING UP THE DRILL LADDER AND FELL BACK.
EE INDICATES WHILE GETTING OFF LOADER HIS FOOT \SLIPPED CAUSING HIS LEG TO BEND BEHIND HIM. EE CONTINUED TO WORK. ONCE SWELLING STARTED HE CONTACTED HIS DR. AND SCHED. SURGERY. EE STARTED MIS SING TIME ON 11/22/02.
EE NOTIFIED THIS OFFICE THAT HE WAS SEEKING MEDICAL TREATMENT DUE TO HIS EXPERIENCE ON 10/30/02.HE EXPERIENCED ABDOMINAL PAIN THAT ROTATED TO HIS BACK. EE STARTED MISSING TIME ON 11/25/02, HE WAS TO RTW ON 12/3/02. EE DID NOT RETURN TO WORK& HIS CLAIM IS STILL UNDER INVESTIGATION TO DETERMINE IF WORK RELATED. EE WAS DIAGNOSED WITH A MILD BULGING DISC & DEG. DISC DISEASE.
CYLINDER ROLLED OVER STRIKING EMPLOYEE ON FOOT.
EE WAS WORKING ON COMPANY TRUCK WHEN HE SLIPPED WHILE HE WAS DISMOUNTING FROM THE TRUCK. HE FELLONTO THE CONCRETE FLOOR.
2001 · 1 incident
EMPLOYEE WAS RIDING IN A PICK UP TRUCK WHEN THE TRUCK RAN OVER A BUMP IN THE ROAD THROWING EE INTO TOP OF TRUCK CAUSING HIM TO STRIKE HIS HEAD.
2000 · 7 incidents
EMPLOYEE WAS INSTALLING A BATTERY TERMINAL AND IT EXPLODED.
EE TRAMMED DRILL TO BENCH & STARTED DRILLING AFER SEVERAL HRS OF DRILLING EE COMPLAINED OF BACK PAIN Y
EE WAS GETTING IN GREASE TRUCK & PULLED SHOULDERRIGHT SIDE
OPERATOR WAS OUTSIDE AND WIND BLEW DUST INTO HIS EYE.
BACKED ONTO ROCK IN DOZER. HARD JAR TO RIGHT SIDE.
PRE-EMPLOYEE OCCUPATIONAL PNEUMOCONIOSIS EMPLOYER NOTIFIED OF COMPENSABILITY ON 9/22/00.
PROGRESSIVE SHORTNESS OF BREATH, ASSOCIATED WITH A DRY NONPRODUCTIVE COUGH.
1999 · 7 incidents
OVERUSE OF RIGHT HAND, WRIST, ELBOW, AND SHOULDER.
REPEATED USE OF HANDS AND WRISTS - LIFTING AND OVERUSE OF HAND AND WRISTS - BOTH HANDS AND WRISTS AND LEFT THUMB.
HE WAS IN THE WATER TRUCK (DRIVING) HIT A HOLE IN THE ROAD AND HURT HIS BACK.
WHILE TRANPORTING TRANSIT BETWEEN SURVEY POINTS LOCATIONS, SLIPPED ON LOOSE STONES ON SLOPE AND TWISTED BACK.
FUEL TRUCK OPERATOR REACHED FOR FUEL HOSE ON TRUCK AND PULLED MUSCLE IN UPPER PORTION OF HIS BACK.
THE EMPLOYEE HIT HIS FINGER WITH SHOP HAMMER WHILE INSTALLING COILS.
WHILE USING RIPPER DOZIER TO PULL SLATE A SHAKE OR JAR WAS CREATED. OPERATOR DID NOT HURT UNTIL SHIFT WAS OVER.
1998 · 7 incidents
CARPAL TUNNEL ON LEFT HAND/WRIST.
DOZIER HE WAS DRIVING SLIPPED OF ROCK, THE SEAT BELT BROKE FROM IMPACT.
PERSON WAS PULLING ROCK WITH A 992 WHEN TEETH STOPPED ON SLAB OF ROCK AND CREATED JERKING MOTION.
OPERATOR WAS MOVING ROCK LARGE AND DOZIER SLIPPED FROM HOLD ON ROCK AND CRESTED A JARRING EFFECT TO LEFT SHOULDER.
SNOW & ICE. TWISTED KNEE WHEN HE FELL ON ICE & SNOW.
HE PLACED HIS RIGHT HAND ON CABLE FOR BIT WRENCH WHILE BIT WAS BEING CHANGED. WHEN SLACK WAS TAKEN OUT OF CABLE, THE HAND WAS CAUGHT THUS INJURING HIS RIGHT RING FINGER & LITTLE FINGER.
SLIPPED ON DOZER PUSH BEAM AND HIT LEFT SIDE OF FACE ON DOZIER WOULDN'T GO TO DR TIL 3 PM.
1997 · 5 incidents
SLIPPED FROM DOZER AND USED HANDRAIL TO BREAK FALL. PULLED SHOULDER.- NO CUTS OR BRUISES- SORE ONLY. DIDN'T GO TO DOCTOR UNTIL 1-5-98.
GPF-THE EMPLOYEE WAS WORKING AS A MECHANIC WHEN HE FILED FOR OCCUPATIONAL PNEUMOCONIOSIS.HIS PREVIOUS WORK EXPERIENCE IS WITH HOME INSULATION.THIS HAS BEEN TURNED OVER TO AN ATTORNEY. EMPLOYEE IS UNEMPLOYED AT THIS TIME.
GPF-EMPLOYEE HAS BEEN OFF WORK RESULTING FROM A PREVIOUS INJURY. HE FILED FOR OCCUPATIONAL PNEUMOCONIOSIS ON 08-18-97.HE HAS WORKED AS A BLASTER HELPER,BLASTER AND TRUCK DRIVER.
WHILE CLIMBING LADDER OF 785 B CAT EE SLIPPED ON THE 2ND STEP & FELL ABOUT 8' TO THE GROUND WHERE HE HIT ON HIS BACK & LEFT ARM.
EE WAS STANDING AT THE REAR OF THE BUILK TRUCK ON THE RIGHT SIDE. HIS LEFT HAND WAS NEAR A AUGER CHAIN. HE WAS SHUTTING THE AUGER DOWN WITH HIS RIGHT HAND WHEN TEH AUGER CAUGHT HSI GLOVE AND HIS LEFT HAND. THE CHAIN TORE AND DISLOCATED HIS THUMB.
1996 · 2 incidents
REAR END BROKE ON COAL TRUCK AND ALLOWED IT TO RUN AWAY AND TURN OVER. ROAD GRADE OF 11%, AVERAGE BERMS OF 3'+ AND ADEQUATE BASING. DRIVER DID EXCELLENT JOB OF PUTTING TRUCK IN APPROPRIATE BER RM AND DITCH.
PERSON WAS CLIMBING INTO GREASE TRK. BY USE OF HANDRAIL AND PULLED LEFT SHOULDER.
1994 · 1 incident
EMPLOYEE FELT RIGHT SIDE OF TRUCK DUMP GIVE, THEN TRUCK ROLED OVER [BED WAS DOWN & LOAD WAS OFF] TRUCKJ WAS STILL RUNNING IN REVERSE WHEN OTHER EMPLOYEES GOT THERE. TRUCK DID ROLL OVER ONE TIM E & LANDED ON IT'S WHEELS.
1988 · 2 incidents
EMPLOYEE WAS PUSHING WITH DOZER & A PIECE OF SLATE FLEW INTO EMPLOYEES LEFT EYE & INBEDDED IN LEFT EYE TOOK MORE THAN FIRST AID TO REMOVE SLATE FROM EYE
EMPLOYEE WAS HELPING ON ROCK CRUSHER AND FELL OFF HURTING HIS ARM AND SHOULDER.
1987 · 4 incidents
EMP WAS DRIVING3TRUCK WHEN BRAKES FAILED AND EMP JUMPED FROM THE TRUCK AND HIT HIS HEAD ON RAILROAD TRACK
EMPLOYEE WAS DR3VING TRUCK AND THE BRAKES FAILED AND TRUCK RAN INTO A CLIFF AND TRUCK TURNED OVER AND EMPLOYEE JUMPED OUT OF TRUCK.
EMPLOYEE WAS RU3NING A LOADER HEWAS THROWN TO THE SIDE AND HE HIT HIS FACE AND JAW AGAINST SIDE OF LOADER-CHIPPING HIS TOOTH.
EMPLOYEE WAS GE7TING OUT OF HIS TRUCK AND FELL AGAINST THE TRUCK HURTING HIS LEFT KNEE.EMPLOYEE RETURNED TO WORK ON THE FOLLOWING MONDAY AND DID NOT MISS ANY WORK AT THAT TIME-TREATMENT WAS ON LY FIRST AID.HO4EVER EMPLOYEE HAS BEEN OFF WITH THIS INJURY SINCE JULY 13,1987.THIS SHOULD HAVE BEEN REPORTED IN JULY,HOWEVER THE YEAR OF 1987 WAS VERY STRESSFUL AND I OVERLOOKED REPORTTING H
1986 · 2 incidents
EMPLOYEE WAB DR3VING TRUCK HE STARTED TO GET OFF OF HIS TRUCK AND HIS FOOT SLIPPED ON STEP CAUSING HIM TO FALL TO THE GROUND. EMPLOYEE WAS OFF FROM 10-1-84 TIL 3-18-85 AT WHICH TIME HE RETURNE D AND WORK UP T3L 10-23-86. HE HAS BEEN RECEIVING MEDICAL ATTENTION SINCE HIS ACCIDENT ON 10-1-84. THERE IS NO NEW INJURY JUST A CONTINUANCE OF HIS BACK PROBLEM. AS STATE
EMPLOYEE WAS CL9ANING GASKETS IN MACHINERY AND CUT HIS LEFT INDEX FINGER.EMPLOYEE WENT TO THE DOCTOR AND RETURN TO WORK THE NEXT WORK SHIFT.GOT HURT ON A FRIDAY AND RETURN TO WORK ON MONDAY.
1985 · 1 incident
EE WAS RUINNING ROADER AT THE END OF T HE SHIFT HE STEPPED OUT OF LOADER ON TO STEPS & SLIPPED & FELL TO GROUND.
1984 · 5 incidents
EMPLOYEE WAS WORKING ON DRILL, WHEN A PIN FLEW OUT HITTING EMPLOYEE ON LEFT KNEE.
EMPLOYEE WAS DRIVING TRUCK HE STARTED TO GET OFF OF HIS TRUCK WHEN HIS FOOT SLIPPED ON STEP CAUSING HIM TO FALL TO THE GROUND.
EMPLOYEE STATES THAT HE HURT HIS BACK WHILE DRIVING HIS TRUCK. PER A COPY ATTACHED, PLEASE NOTE THAT OUR WORKMEN\S COMPENSATION CARRIER HAS DENIED COVEREGE OR PAYMENT OF THIS CLAIM.
EMPLOYEE LEFT HIS TRUCK TO GET SUPPLIES, THERE WAS SNOW & ICE ON THE GROUND. HE SLIPPED AND FELL ON THE GROUND HITTING ON HIS BACK.
RUNNING DOZER AND HURT BACK.
1983 · 1 incident
EMPLOYEE WAS DRIVING THE TRUCK AND THE BRAKES FAILED TO WORK AND THE DRIVER JUMPED FROM THE TRUCK HITTING THE GROUND.