Mining Incidents

Pit #2: 24 MSHA citations Metal/Non-Metal

Controlled by Ferroglobe PLC
Haynes, Autauga County, AL  ·  Abandoned
MSHA Mine ID: 0103307

Pit #2 has $3K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Pit #2.

Fatalities
0
Total incidents
9
Years on record
2005–2007
Latest incident
Jul 2007
Compliance record
MSHA citations since 2005
24
citations
5
significant & substantial
$2,795
proposed penalties
$2,795
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2005
9
inspections on record
112
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 112 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Pit #2 has $3K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$3K
proposed penalties
$3K
current assessed
$3K
paid to date
$0
outstanding
23 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2008-05-28.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
21.7%
significant & substantial
0.0%
high negligence or reckless
21.7%
reasonably likely or greater
47.8%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 8.7% low, 91.3% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2005-11-16, 20 years ago
3
samples
0
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg2
  • Unlisted Particulate, respirable, <1% Qtz1
Show the individual readings (3)
Date Contaminant Concentration Limit Conc / limit Occupation
2005-11-16 Unlisted Particulate, respirable, <1% Qtz 0.13 Front-end Loader Operator
2005-11-16 Respirable dust, <.1mg 0 Truck Driver
2005-11-16 Respirable dust, <.1mg 0 Belt Cleaner
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Pit #2 recorded 10.90 reportable injury cases per 100 full-time workers in 2007.

Injury rate, 2007
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
10.90
total case rate
3.63
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 3.30 and the all-US-mining average was 3.77 cases per 100 workers.
In Alabama, metal and nonmetal mining averaged 3.90 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2007 * 10.90 3.63 0.000
2006 * 18.91 11.35 0.000
2005 * 9.03 9.03 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Cash Sand & Gravel, LLC 2004 to 2005
  2. Alabama Sand and Gravel Inc 2005 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2008 15
2007 21
2006 20
2005 10
2004 0
Source: MSHA quarterly employment and production, updated weekly.

Pit #2 sits in Autauga County, Alabama, where the Census mining category is 0.3% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Autauga County, Alabama · Population 59,285
0.3%
Mining share of county employment
$69,841
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2008 Q4 0 0 0
2008 Q2 13,945 4 2 286.8
2008 Q1 13,367 4 0 299.2
2007 Q4 13,452 0 0 0.0
2007 Q3 14,810 1 0 67.5
2007 Q2 13,740 0 0 0.0
2007 Q1 13,024 5 2 383.9
2006 Q4 12,988 0 0 0.0
Show 8 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2006 Q3 12,500 0 0 0.0
2006 Q2 16,400 0 0 0.0
2006 Q1 10,993 0 0 0.0
2005 Q4 7,843 3 0 382.5
2005 Q3 7,151 0 0 0.0
2005 Q2 7,164 3 0 418.8
2005 Q1 0 0 0
2004 Q4 0 0 0
No fatalities recorded at this mine.

Reportable incidents

9 on file

2007 · 3 incidents

July 17, 2007 AL · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDLING OF MATERIALS
Alabama Sand and Gravel Inc · Struck by flying object

While fueling equipment, diesel fuel got into employee's eyes.

February 17, 2007 AL · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Alabama Sand and Gravel Inc · Over-exertion in lifting objects

Pouring up oil from oil shed and hurt back when lifting oil container.

February 16, 2007 AL · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator SLIP OR FALL OF PERSON
Alabama Sand and Gravel Inc · Fall to the walkway or working surface

Working on ground clearing brush to burn and twisted L knee.

2006 · 5 incidents

September 1, 2006 AL · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman OTHER
Alabama Sand and Gravel Inc · Absorption of radiations, caustics, toxic and noxious substances

Spider bite on left arm while cleaning debris from under hopper.

August 10, 2006 AL · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Alabama Sand and Gravel Inc · Fall to the walkway or working surface

Leaving wash plant area, stepped on loose rocks and fell onto right arm (elbow).

July 22, 2006 AL · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator OTHER
Alabama Sand and Gravel Inc · Absorption of radiations, caustics, toxic and noxious substances

Insect bite arm causing swelling and pain

April 6, 2006 AL · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer MACHINERY
Alabama Sand and Gravel Inc · Struck against stationary object

OPERATING DOZER OVER A MOUND OF DIRT CAUSING THE RIGHT ELBOW TO HIT FIRE EXTINGUISHER. CUT ELBOW AND CAUSING SWELLING OF R. ELBOW.

2005 · 1 incident

December 17, 2005 AL · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Alabama Sand and Gravel Inc · Struck by falling object

Doing maintenance on 35 ton Volvo truck, he was laying under truck loosening belly pan; belly pan fell on left shoulder.