EE stated he was placing a conveyor belt tail roll in place. Come-a-long chain came loose- caught both hands between tail roller & steel plate. Fracture to little finger left hand, ring finger, r. hand, both fingers required stitches from lacerations. Started missing work 6/8/07.
Pleasant View Washer Plant: 101 MSHA citations Coal
Pleasant View Washer Plant has $12K in proposed MSHA penalties and $0 outstanding across 1 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Pleasant View Washer Plant.
- Fatalities
- 0
- Total incidents
- 8
- Years on record
- 1993–2007
- Latest incident
- Jun 2007
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Pleasant View Washer Plant has $12K in proposed MSHA penalties and $0 outstanding across 1 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.ⓘ
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.- Settled 18 · 100%
ⓘ
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.ⓘ
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.| Docket | Decision | Judge | Year | Proposed / upheld |
|---|---|---|---|---|
| KENT 2010-1382 | Settlement | Lesnick | 2011 | $3K → $2K |
MSHA sampling at Pleasant View Washer Plant shows 100% of 22 respirable coal dust samples met the 1.5 mg/m3 standard.
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2009-12-11, 16 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.- HIGHLIFT OPERATOR/FRONT END LOADER13
- TIPPLE OPERATOR4
- BULLDOZER OPERATOR1
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2008-10-02, 17 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.- HIGHLIFT OPERATOR/FRONT END LOADER7
- TIPPLE OPERATOR3
- CLEANING PLANT OPERATOR1
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.| Year | within 1.5 mg/m3 | samples |
|---|---|---|
| 2009 | 100% | 5 |
| 2008 | 100% | 6 |
| 2007 | 100% | 8 |
| 2006 | 100% | 3 |
| Year | over PEL | samples |
|---|---|---|
| 2008 | 0% | 2 |
| 2007 | 0% | 6 |
| 2006 | 0% | 3 |
- Kentucky Processing & Equipment LLC 1993 to present
| Year | Employees |
|---|---|
| 2016 | 0 |
| 2015 | 0 |
| 2014 | 0 |
| 2013 | 0 |
| 2011 | 0 |
| 2010 | 5 |
| 2009 | 7 |
| 2008 | 6 |
| 2007 | 6 |
| 2006 | 5 |
| 2005 | 4 |
| 2001 | 0 |
| 2000 | 0 |
Pleasant View Washer Plant sits in Hopkins County, Kentucky, where the Census mining category is 2.7% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2016 Q3 | 0 | 0 | 0 | |
| 2016 Q2 | 0 | 0 | 0 | |
| 2016 Q1 | 0 | 0 | 0 | |
| 2015 Q4 | 0 | 0 | 0 | |
| 2015 Q3 | 0 | 0 | 0 | |
| 2015 Q2 | 0 | 0 | 0 | |
| 2015 Q1 | 0 | 0 | 0 | |
| 2014 Q4 | 0 | 0 | 0 |
Show 33 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2014 Q3 | 0 | 0 | 0 | |
| 2014 Q2 | 0 | 0 | 0 | |
| 2014 Q1 | 0 | 0 | 0 | |
| 2013 Q4 | 0 | 0 | 0 | |
| 2013 Q3 | 0 | 0 | 0 | |
| 2011 Q4 | 0 | 0 | 0 | |
| 2011 Q3 | 0 | 0 | 0 | |
| 2011 Q2 | 0 | 0 | 0 | |
| 2011 Q1 | 0 | 11 | 3 | |
| 2010 Q4 | 660 | 0 | 0 | 0.0 |
| 2010 Q3 | 824 | 1 | 0 | 1213.6 |
| 2010 Q2 | 3,271 | 18 | 9 | 5502.9 |
| 2010 Q1 | 3,318 | 4 | 0 | 1205.5 |
| 2009 Q4 | 4,487 | 1 | 0 | 222.9 |
| 2009 Q3 | 4,309 | 0 | 0 | 0.0 |
| 2009 Q2 | 4,301 | 1 | 0 | 232.5 |
| 2009 Q1 | 3,702 | 1 | 0 | 270.1 |
| 2008 Q4 | 3,820 | 1 | 0 | 261.8 |
| 2008 Q3 | 3,199 | 9 | 7 | 2813.4 |
| 2008 Q2 | 3,186 | 7 | 5 | 2197.1 |
| 2008 Q1 | 3,677 | 0 | 0 | 0.0 |
| 2007 Q4 | 3,575 | 3 | 2 | 839.2 |
| 2007 Q3 | 3,894 | 0 | 0 | 0.0 |
| 2007 Q2 | 3,946 | 5 | 0 | 1267.1 |
| 2007 Q1 | 3,895 | 4 | 0 | 1027.0 |
| 2006 Q4 | 2,328 | 1 | 1 | 429.6 |
| 2006 Q3 | 2,710 | 0 | 0 | 0.0 |
| 2006 Q2 | 1,812 | 4 | 1 | 2207.5 |
| 2006 Q1 | 2,537 | 10 | 2 | 3941.7 |
| 2005 Q4 | 1,751 | 7 | 0 | 3997.7 |
| 2001 Q4 | 0 | 0 | 0 | |
| 2000 Q2 | 0 | 0 | 0 | |
| 2000 Q1 | 0 | 0 | 0 |
Reportable incidents
8 on file2007 · 1 incident
1997 · 1 incident
IT WAS REALLY MUDDY THAT DAY. HIS FEET BECAME TANGLED. HE LOST BALANCE AND FELL OFF THE TRUCK BREAKING HIS HIP(RT).
1996 · 1 incident
EE STATED HE WAS CUTTING A SKIRT RUBBER WITH A BELT KNIFE, KNIFE SLIPPED, CUT EE'S THUMB ON LEFT HAND, REQUIRING 7 SUTURES.
1995 · 2 incidents
YEMPLOYEE STATED HE WAS CARRYING A DRIER SCREEN FOR COAL BASKET, SLIPPED ON A PIECE OF RUBBER BELT CAUSING EMPLOYEE TO FALL, EMPLOYEE'S MIDDLE FINGER ON LEFT HAND WAS CAUGHT BETWEEN SCREEN AND GROUND CAUSING LACERATION REQUIRING 10 STITCHES.
A 4 FT LIGHT BULB LEANING UP IN A CORNER AND IT GOT KNOCKED OVER.
1994 · 2 incidents
INJURED PARTY WAS PUTTING BATTERY CABLE ON LOADER, WHILE DRIVING END DOWN ON POST, RUST OFF OF BRASS TERMINAL END FLEW INTO EYE.
INJURED PARTY WAS WORKING ON A PUMP WHEN WRENCH SLIPPED OFF THE BOLT PINNING HIS LEFT HAND AGAINST THE BASE OF THE PUMP CAUSIGN HIS INJURY.
1993 · 1 incident
INJURED PARTY WAS DRILLING A HOLE IN A METAL BRACE TO PUT A WIPER ON THE BELT WHEN THE DRILL DRILLED THRU THE METAL BRACE AND GOT CAUGHT CAUSING THE DRILL TO TURN IN HIS HAND CATCHING HIS LEFT HAND AND RING FINGER PULLING HIS FINGER NAIL OFF