TWO EMPLOYEES WERE CHANGING HAMMERS INSIDE A SPOKANE CRUSHER. ONE SWUNG HIS SLEDGE HAMMER TO LOOSEN AN ANVIL BUT INSTEAD HIT THE OTHER'S FINGER AGAINST A PIN WITH THE HAMMER HEAD.
Portable Crusher #1: 47 MSHA citations Metal/Non-Metal
Portable Crusher #1 has $6K in proposed MSHA penalties and $120 outstanding across 2 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Portable Crusher #1.
- Fatalities
- 0
- Total incidents
- 13
- Years on record
- 1987–2001
- Latest incident
- May 2001
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Portable Crusher #1 has $6K in proposed MSHA penalties and $120 outstanding across 2 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.ⓘ
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.- Settled 4 · 80%
- Stood as issued 1 · 20%
ⓘ
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.ⓘ
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.| Docket | Decision | Judge | Year | Proposed / upheld |
|---|---|---|---|---|
| WEST 2006-151M | Settlement | Manning | 2006 | $809 → $585 |
| WEST 2007-83M | Settlement | Manning | 2007 | $425 → $120 |
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Metal and nonmetal contaminants (personal samples)
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2005-06-08, 21 years ago
ⓘ
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.- Quartz, respirable, >1% Qtz2
Show the individual readings (2)
| Date | Contaminant | Concentration | Limit | Conc / limit | Occupation |
|---|---|---|---|---|---|
| 2005-06-08 | Quartz, respirable, >1% Qtz | 0.22 | 0.33 | 0.67 | Crusher Oper/Worker |
| 2005-06-08 | Quartz, respirable, >1% Qtz | 0.55 | 0.66 | 0.83 | Front-end Loader Operator |
- Asphalt Paving Company 1987 to present
| Year | Employees |
|---|---|
| 2009 | 0 |
| 2008 | 3 |
| 2007 | 4 |
| 2006 | 3 |
| 2005 | 4 |
| 2004 | 1 |
| 2003 | 5 |
| 2002 | 3 |
| 2001 | 6 |
| 2000 | 9 |
Portable Crusher #1 sits in Jefferson County, Colorado, where the Census mining category is 0.8% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2009 Q1 | 0 | 0 | 0 | |
| 2008 Q4 | 188 | 0 | 0 | 0.0 |
| 2008 Q3 | 1,050 | 3 | 2 | 2857.1 |
| 2008 Q2 | 863 | 16 | 7 | 18540.0 |
| 2008 Q1 | 139 | 0 | 0 | 0.0 |
| 2007 Q4 | 536 | 0 | 0 | 0.0 |
| 2007 Q3 | 921 | 3 | 0 | 3257.3 |
| 2007 Q2 | 1,766 | 0 | 0 | 0.0 |
Show 29 earlier quarters Hide earlier quarters
| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2007 Q1 | 1,217 | 0 | 0 | 0.0 |
| 2006 Q4 | 1,849 | 0 | 0 | 0.0 |
| 2006 Q3 | 745 | 3 | 0 | 4026.8 |
| 2006 Q2 | 628 | 0 | 0 | 0.0 |
| 2006 Q1 | 171 | 0 | 0 | 0.0 |
| 2005 Q4 | 68 | 0 | 0 | 0.0 |
| 2005 Q3 | 61 | 0 | 0 | 0.0 |
| 2005 Q2 | 2,244 | 7 | 1 | 3119.4 |
| 2005 Q1 | 1,541 | 0 | 0 | 0.0 |
| 2004 Q4 | 429 | 0 | 0 | 0.0 |
| 2004 Q3 | 0 | 0 | 0 | |
| 2004 Q2 | 0 | 0 | 0 | |
| 2004 Q1 | 872 | 0 | 0 | 0.0 |
| 2003 Q4 | 2,601 | 0 | 0 | 0.0 |
| 2003 Q3 | 2,870 | 2 | 0 | 696.9 |
| 2003 Q2 | 2,689 | 0 | 0 | 0.0 |
| 2003 Q1 | 997 | 0 | 0 | 0.0 |
| 2002 Q4 | 1,010 | 0 | 0 | 0.0 |
| 2002 Q3 | 2,704 | 0 | 0 | 0.0 |
| 2002 Q2 | 1,397 | 0 | 0 | 0.0 |
| 2002 Q1 | 3 | 0 | 0 | 0.0 |
| 2001 Q4 | 3,488 | 0 | 0 | 0.0 |
| 2001 Q3 | 2,370 | 5 | 3 | 2109.7 |
| 2001 Q2 | 3,082 | 0 | 0 | 0.0 |
| 2001 Q1 | 2,163 | 0 | 0 | 0.0 |
| 2000 Q4 | 6,191 | 0 | 0 | 0.0 |
| 2000 Q3 | 4,434 | 0 | 0 | 0.0 |
| 2000 Q2 | 4,247 | 8 | 5 | 1883.7 |
| 2000 Q1 | 2,656 | 0 | 0 | 0.0 |
Reportable incidents
13 on file2001 · 1 incident
1999 · 1 incident
THE CRUSHER OPERATOR WAS CLIMBING ONTO THE CONE USING THE FEEDER CONVEYOR FRAMEWORK FOR ACCESS. THE OPERATOR SLIPPED, FALLING APPROX. 6' ONTO THE TOOLBOX MOUNTED ON A WELDING TRUCK PARKED BELO W, FCRACTURING HIS 7TH RIB.
1996 · 3 incidents
EE WAS ASSITING WITH INSTALLING A BOOM LIFTING OGNICE ON LOADE 4-239 BUCKET. EE WA SHOLDING UP TOPBOOM BAR TO PLACE THE PIN. AS SCRAPED THE TOP OF EE LAST FOOT. CONTUSION TO TOP OF LEFT FOOT.
EE AND OTHER WHERE PLACING RAILROAD TIE UNDER CONVEYOR CO WORKER PUSHED BE RAILROAD TIMBER FOREWARD CATCHING EE FINGER BETWEEN A PIECE OF IRON AND RAILROAD TIE.
EE WAS WELDING IN THE MAIN FRAME CONE CRUSHER AND DIDN'T DROP HIS WELDING HOOD QUICK ENOUGH PRIOR TO ARCING THE WELDING RODS.
1995 · 3 incidents
EE WHILE OPERATING LOADER FELT SOME DISCOMFORT JUST ABOVE AND TO THE RIGHT SIDE OF THE TESTICULAR AREA. EE WAS CONCERNED THAT IT MAY BE A HERNIA
EE WAS PRYING UP FROZEN CHUNCKS OF DIRT BESIDE BFEEDER TAIL PULLEY. THE BAR BROKE LOOSE FROM THEGROUND & FLIPPED UP & BUMPED EE ON THE RIGHT SIDE OF THE FOREHEAD. COUPLE OF STITCHES.
EE INDICATED HIS HAND, WHERE SORE MADE ALSO FOREARM FROM OPERATING BUCKET LOADER LEVERS. EE WILL SEE HAND SPELIST ON 12-22-95 TO FIND OUT 17 THERE IS A PROBLEM. DR APT ON 12-22-95 WITH B.J. PA RKS MD OF HAND SPECIALIST PA
1993 · 2 incidents
EE WHEN STEPPING OUT OF THE CONTROL SLIPPED ON THE STEPS AND TRADE TO CATCH HIMSELF WITH HIS LAEFT ARM.
INJURED & ASSISTANT WERE TRYING TO MOVE HYDRAULIC CYLINDER OFF A BELT ON GROUND ONTO OR INTO LOADER BUCKET WHILE STARTING THE CONVEYOR BELT ON GROUND FLOOR. LIFTING & PUSHING TWISTED HIS BACK.
1992 · 2 incidents
EE WAS SHOVELING UNDER THE CONVEYOR TAIL PULLEY-EE WAS TRYING TO HELP EE BY PULLING SAME OF THE DIRT BACK FROM UNDER CONVEYOR WITH THE CASE SKID LOADER. BUT, THE CASE LOADER BUMPED THE CONVEYO R, KNOCKING IT OFF ITS BLOCKS, FENCING THE HANDLE OF THE SHOVEL TO STRICK HIM ON THE LEFT WRIST-EE TAKEN TO DR NO BROKEN BONE SPLINT WILL BE USED FOR SHORT PERIOD.
EE WAS CUTTING A CONVEYOR BELT ON THE GROUND, BEHIND QUARRY SHOP LOST HIS BALANCE SLIPPED WITH THE KNIFE AND CUT HIS RIGHT LEG ABOVE THE KNEE. EE WAS TAKEN TO WARD RD CLINIC OR DR SIMON FOR RE VIEW AND 4 TOP SITITCHES.
1987 · 1 incident
HE WAS OPERATIN1 A CUTTING TORCH TO MAKE SPACES FOR CONE CRUSHER WHEN SOME SLAG FLEW OVER THE TOP OF HIS SAFETY GLASSES INTO HIS LEFT EYE