citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 970 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Purdy Materials has $45K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$45K
proposed penalties
$45K
current assessed
$45K
paid to date
$0
outstanding
177 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2026-04-30.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Metal and nonmetal contaminants (personal samples)
ⓘMany samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2024-12-20
14%
of limit-tested samples over the exposure limit
18
samples
7
limit-tested
Most sampled contaminants
Quartz, respirable, >1% Qtz71 over
Respirable dust, <.1mg10
Unlisted Particulate, respirable, <1% Qtz1
Show the individual readings (18)
Date
Contaminant
Concentration
Limit
Conc / limit
Occupation
2010-06-29
Quartz, respirable, >1% Qtz
0.9
0.85
1.06
Front-end Loader Operator
2024-12-20
Respirable dust, <.1mg
0
Utility Man
2022-09-08
Respirable dust, <.1mg
0
Front-end Loader Operator
2022-09-08
Respirable dust, <.1mg
0
Front-end Loader Operator
2017-09-18
Respirable dust, <.1mg
0
Front-end Loader Operator
2017-09-18
Quartz, respirable, >1% Qtz
0.13
0.89
0.15
Cleanup Man
2017-09-18
Respirable dust, <.1mg
0
Washer Operator
2014-11-04
Respirable dust, <.1mg
0
Crusher Oper/Worker
2014-11-04
Unlisted Particulate, respirable, <1% Qtz
0.12
Crusher Oper/Worker
2010-06-29
Quartz, respirable, >1% Qtz
0.31
0.65
0.48
Crusher Oper/Worker
2010-06-29
Respirable dust, <.1mg
0
Front-end Loader Operator
2007-08-14
Quartz, respirable, >1% Qtz
0.23
0.62
0.37
Washer Operator
2007-08-14
Respirable dust, <.1mg
0
Backhoe Operator
2007-08-14
Respirable dust, <.1mg
0
Front-end Loader Operator
2005-06-22
Quartz, respirable, >1% Qtz
0.18
0.54
0.33
Dry Screen Plant Operator
2003-03-12
Quartz, respirable, >1% Qtz
0.17
0.81
0.21
Crusher Oper/Worker
2003-03-12
Respirable dust, <.1mg
0
Front-end Loader Operator
2003-03-12
Quartz, respirable, >1% Qtz
0.25
0.9
0.28
Crusher Oper/Worker
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Purdy Materials recorded 0.00 reportable injury cases per 100 full-time workers in 2025.
Injury rate, 2025
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
In Indiana, metal and nonmetal mining averaged 1.61 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year
total case rate
days-away
fatal
2025 *
0.00
0.00
0.000
2024 *
0.00
0.00
0.000
2023 *
0.00
0.00
0.000
2022 *
0.00
0.00
0.000
2021 *
0.00
0.00
0.000
2020 *
0.00
0.00
0.000
2019 *
0.00
0.00
0.000
2018 *
0.00
0.00
0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year
Employees
2026
8
2025
10
2024
9
2023
9
2022
9
2021
11
2020
11
2019
12
2018
11
2017
12
2016
12
2015
11
2014
9
2013
8
2012
8
2011
9
2010
9
2009
10
2008
14
2007
14
2006
13
2005
14
2004
11
2003
12
2002
12
2001
10
2000
10
Source: MSHA quarterly employment and production, updated weekly.
Purdy Materials sits in Tippecanoe County, Indiana, where the Census mining category is 0.1% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Tippecanoe County, Indiana · Population 187,399
0.1%
Mining share of county employment
$58,622
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Mechanic was lifting air hammer into position & touched the trigger when not ready to activate. His left hand was forward the bit & the bit pinned his finger. Bit of air hammer fired landing on finger. Finger was between bit & pin being driven out.
2012 · 1 incident
January 10, 2012IN · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanSLIP OR FALL OF PERSON
he was lying on his side using a cutting torch and a hot piece of slag went in right ear Now July 15,2010 had surgery to repair a hole in eardrum will miss 7-10 days
2000 · 1 incident
May 27, 2000IN · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDTOOLS (NONPOWERED)
May 3, 1999IN · Metal/Non-Metalwarehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operatorSLIP OR FALL OF PERSON