Mining Incidents

Red Bluff-Waugh Plant: 17 MSHA citations Metal/Non-Metal

Waugh, Montgomery County, AL  ·  Abandoned
MSHA Mine ID: 0103099

Red Bluff-Waugh Plant has $2K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Red Bluff-Waugh Plant.

Fatalities
0
Total incidents
3
Years on record
1997–2002
Latest incident
May 2002
Compliance record
MSHA citations since 2000
17
citations
6
significant & substantial
$1,724
proposed penalties
$1,724
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
17
inspections on record
179
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 179 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Red Bluff-Waugh Plant has $2K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$2K
proposed penalties
$2K
current assessed
$2K
paid to date
$0
outstanding
17 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2010-05-10.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
35.3%
significant & substantial
5.9%
high negligence or reckless
35.3%
reasonably likely or greater
52.9%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 17.6% low, 76.5% moderate, 5.9% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2010-05-11, 16 years ago
4
samples
0
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg4
Show the individual readings (4)
Date Contaminant Concentration Limit Conc / limit Occupation
2010-05-11 Respirable dust, <.1mg 0 Washer Operator
2010-05-11 Respirable dust, <.1mg 0 Front-end Loader Operator
2010-05-11 Respirable dust, <.1mg 0 Truck Driver
2010-05-11 Respirable dust, <.1mg 0 Backhoe Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Ownership history
  1. Apac Alabama Inc 1997 to 2007
  2. Red Bluff Sand & Gravel LLC 2007 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2010 4
2009 5
2008 5
2005 0
2004 0
2003 2
2002 7
2001 7
2000 6
Source: MSHA quarterly employment and production, updated weekly.

Red Bluff-Waugh Plant sits in Montgomery County, Alabama, where the Census mining category is 0.0% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Montgomery County, Alabama · Population 227,197
0.0%
Mining share of county employment
$58,153
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2010 Q4 50 0 0 0.0
2010 Q3 2,337 0 0 0.0
2010 Q2 3,195 3 2 939.0
2010 Q1 2,944 1 1 339.7
2009 Q4 3,170 0 0 0.0
2009 Q3 3,352 0 0 0.0
2009 Q2 3,133 1 0 319.2
2009 Q1 2,566 1 0 389.7
Show 25 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2008 Q4 3,532 0 0 0.0
2008 Q3 3,437 0 0 0.0
2008 Q2 3,288 2 1 608.3
2008 Q1 3,316 1 0 301.6
2005 Q1 0 0 0
2004 Q4 0 0 0
2004 Q3 0 0 0
2004 Q2 0 0 0
2004 Q1 0 0 0
2003 Q4 0 0 0
2003 Q3 0 0 0
2003 Q2 0 0 0
2003 Q1 880 0 0 0.0
2002 Q4 3,189 0 0 0.0
2002 Q3 4,103 0 0 0.0
2002 Q2 4,325 1 1 231.2
2002 Q1 3,714 0 0 0.0
2001 Q4 3,511 2 0 569.6
2001 Q3 4,391 2 0 455.5
2001 Q2 4,694 0 0 0.0
2001 Q1 4,345 0 0 0.0
2000 Q4 3,872 2 1 516.5
2000 Q3 3,021 0 0 0.0
2000 Q2 3,296 0 0 0.0
2000 Q1 3,846 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

3 on file

2002 · 1 incident

May 29, 2002 AL · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Apac Alabama Inc · Over-exertion in lifting objects

EMPLOYEE WHILE SHOVELING ATTEMPTED TO SHOVEL AND LIFT TOO MUCH MATERIAL AT ONE TIME AND TWISTED BACK TO COMPENSATE THUS STRAINING HIS LUMBAR.

1997 · 2 incidents

December 17, 1997 AL · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman IGNITION OR EXPLOSION OF GAS OR DUST
Apac Alabama Inc · Contact with hot objects or substances

EMPLOYEE CUTTING HOLE IN OVERSIZE CHUTE TO UNCLOG IT USING A WELDING/CUTTING TORCH. THE O-RING FAILED CAUSING ACETYLENE TO ESCAPE AND IGNITE BURNING TOP OF LEFT HAND.

August 5, 1997 AL · Metal/Non-Metal prep plant foreman, supervisor, mill plant supervisor, kiln supervisor MACHINERY
Apac Alabama Inc · Struck by... (Not Elsewhere Classified)

EMPLOYEE REMOVING SCREEN USING AIR WRENCH WHEN A NUT BECAME LODGED IN THE SOCKET OF THE TOOL.WITH THE TOOL STILL IN HAND AND NOT DE-ENERGIZED EMPLOYEE STUCK FINGER IN SOCKET, ACCIDENTLY HIT TR IGGER SCREWING NUT ONTO FINGER. REQUIRED 4 STITCHES FOR TREATMENT OF LACERATION.