What are Redlands Rock Plant's MSHA penalties?

Redlands Rock Plant has $19K in proposed MSHA penalties on record, with $0 currently outstanding across 5 contested dockets.

← Back to search

Redlands Rock Plant Metal/Non-Metal

Matich Corporation · Surface

Controlled by Matich Corp

San Bernardino, San Bernardino County, CA · Abandoned

MSHA Mine ID: 0405614

Redlands Rock Plant has $19K in proposed MSHA penalties and $0 outstanding across 5 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Redlands Rock Plant.

Fatalities: 1
Total incidents: 5
Years on record: 2006–2009
Latest incident: Jan 2009

Compliance record

MSHA citations since 2004

citations

significant & substantial

$19,384

proposed penalties

$46,921

paid to date

242% of proposed penalties paid to date, a $0 gap.

Source: MSHA violations data, updated weekly.

Inspection activity

MSHA inspections since 2004

inspections on record

426

inspection hours

n/a

citations per 100 inspection hours

ⓘ

This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.

Rate withheld: 426 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.

Source: MSHA inspections data, updated weekly.

Penalty disposition

ⓘ

Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.

$19K

proposed penalties

$47K

current assessed

$47K

paid to date

outstanding

43 assessments are final orders; 5 contested dockets.

As of the most recent assessment on 2009-07-01.

Source: MSHA assessed-violations and conference/litigation data, updated weekly.

See also the operator's enforcement record

Quarterly safety rates

ⓘ

Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.

Citations per million employee-hours, as reported to MSHA

Quarter	Hours worked	Citations	S&S	Per 1M hrs
2009 Q3	1,574	3	3	1906.0
2009 Q2	2,405	0	0	0.0
2009 Q1	1,980	10	4	5050.5
2008 Q4	2,107	4	2	1898.4
2008 Q3	2,475	0	0	0.0
2008 Q2	2,857	0	0	0.0
2008 Q1	4,051	2	1	493.7
2007 Q4	4,265	1	0	234.5

Show 12 earlier quarters

Quarter	Hours worked	Citations	S&S	Per 1M hrs
2007 Q3	4,186	0	0	0.0
2007 Q2	2,040	1	0	490.2
2007 Q1	4,095	2	1	488.4
2006 Q4	3,240	0	0	0.0
2006 Q3	3,600	1	0	277.8
2006 Q2	3,600	1	0	277.8
2006 Q1	4,330	0	0	0.0
2005 Q4	4,320	5	0	1157.4
2005 Q3	4,316	4	1	926.8
2005 Q2	4,056	3	0	739.6
2005 Q1	4,680	0	0	0.0
2004 Q4	3,150	7	1	2222.2

Fatalities at this mine

1 recorded

January 6, 2009 CA · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator Fatality · FALLING/SLIDING/ROLLING MATERIALS

Matich Corporation · Struck by falling object

The victim was operating a skid steer loader underneath a belt conveyor that was being dismantled. A co-worker was in an elevated manlift & was using a cutting torch to remove a piece of 4" metal tubing attached to the leg supports of the belt conveyor. The tubing fell to the ground, tipped over into the front of the loader & struck the victim. He was hospitalized & died on 1/9/09.

Reportable incidents

4 on file (excluding fatalities above)

2008 · 1 incident

August 2, 2008 CA · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)

Matich Corporation · Struck by... (Not Elsewhere Classified)

Injury was using a 200 Lbs battering hammer which was suspended in air by the crane. while trying to loosen the large nut for the mantle liner on the short head cone crusher. his hand was pinched inbetween the front of the crane and the battering ram hammer. This caused a cut to his right hand.

2006 · 3 incidents

March 23, 2006 CA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman MACHINERY

Matich Corporation · Struck by flying object

EMPLOYEE HAD HIS FOOT IN BETWEEN THE GUARDRAIL AND THE JAW CRUSHER WHEN A ROCK SHOT UP AND HIT HIS FOOT - FRACTURED HIS TOE.

March 9, 2006 CA · Metal/Non-Metal outside foreman, leadman HANDLING OF MATERIALS

Matich Corporation · Caught in, under or between (Not Elsewhere Classified)

WHILE CHANGING V-BELT ON #1 SCREEN DECK, EMPLOYEE'S RIGHT FOREARM WAS CAUGHT BETWEEN GUARD AND THE BELT, CAUSING A LACERATION.

February 2, 2006 CA · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman MACHINERY

Matich Corporation · Over-exertion (Not Elsewhere Classified)

DURING EMPLOYEE'S NORMAL JOB ACTIVITIES (RUNNING JAW CRUSHER) HE SOMEHOW INJURED HIMSELF. HE STATED THAT HE DID NOT KNOW HOW HE SUSTAINED HIS INJURY.

For insurers, brokers, and safety consultants

The full compliance file on Redlands Rock Plant

A dated report covering the 26-year penalty trail, line-item violation pattern, contest and docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF with the underlying data as CSV.

Get the report ($149) See a sample report Monitor a whole book of operators, $99/mo