citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 233 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Reed Pit #5101 has $4K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$4K
proposed penalties
$4K
current assessed
$4K
paid to date
$0
outstanding
29 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2012-09-06.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Metal and nonmetal contaminants (personal samples)
ⓘMany samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2007-07-10, 19 years ago
3
samples
0
limit-tested
Most sampled contaminants
Respirable dust, <.1mg3
Show the individual readings (3)
Date
Contaminant
Concentration
Limit
Conc / limit
Occupation
2007-07-10
Respirable dust, <.1mg
0
Front-end Loader Operator
2007-07-10
Respirable dust, <.1mg
0
Bulldozer Operator
2007-07-10
Respirable dust, <.1mg
0
Front-end Loader Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Reed Pit #5101 recorded 8.92 reportable injury cases per 100 full-time workers in 2011.
Injury rate, 2011
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
8.92
total case rate
0.00
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 2.56 and the all-US-mining average was 3.08 cases per 100 workers.
In Alabama, metal and nonmetal mining averaged 2.26 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year
total case rate
days-away
fatal
2011 *
8.92
0.00
0.000
2010 *
0.00
0.00
0.000
2008 *
0.00
0.00
0.000
2007 *
0.00
0.00
0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year
Employees
2012
8
2011
9
2010
9
2009
8
2008
10
2007
11
2006
6
2005
2
2004
3
Source: MSHA quarterly employment and production, updated weekly.
Reed Pit #5101 sits in Monroe County, Alabama, where the Census mining category is 0.2% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Monroe County, Alabama · Population 19,580
0.2%
Mining share of county employment
$40,225
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2012 Q4
2,818
0
0
0.0
2012 Q3
3,747
6
0
1601.3
2012 Q2
5,414
0
0
0.0
2012 Q1
4,772
0
0
0.0
2011 Q4
4,635
4
1
863.0
2011 Q3
5,658
0
0
0.0
2011 Q2
5,605
1
1
178.4
2011 Q1
6,535
0
0
0.0
Show 27 earlier quartersHide earlier quarters
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2010 Q4
5,125
0
0
0.0
2010 Q3
4,705
0
0
0.0
2010 Q2
5,765
0
0
0.0
2010 Q1
5,281
1
0
189.4
2009 Q4
6,197
0
0
0.0
2009 Q3
4,841
4
2
826.3
2009 Q2
4,282
0
0
0.0
2009 Q1
3,016
0
0
0.0
2008 Q4
3,588
0
0
0.0
2008 Q3
4,938
0
0
0.0
2008 Q2
7,697
1
0
129.9
2008 Q1
6,145
1
0
162.7
2007 Q4
6,565
0
0
0.0
2007 Q3
6,867
2
1
291.2
2007 Q2
7,494
0
0
0.0
2007 Q1
6,633
0
0
0.0
2006 Q4
7,662
0
0
0.0
2006 Q3
1,314
5
1
3805.2
2006 Q2
1,151
0
0
0.0
2006 Q1
1,350
0
0
0.0
2005 Q4
1,449
0
0
0.0
2005 Q3
448
0
0
0.0
2005 Q2
998
2
2
2004.0
2005 Q1
1,454
0
0
0.0
2004 Q4
1,246
0
0
0.0
2004 Q3
1,185
2
0
1687.8
2004 Q2
1,249
0
0
0.0
No fatalities recorded at this mine.
Reportable incidents
5 on file
2012 · 3 incidents
December 13, 2012AL · Metal/Non-Metalbarge/boat/dredge/towbarge/towboat/leach operator, riverman, deck handSLIP OR FALL OF PERSON
Paddling aluminum boat to retrieve wooden boat, the boats collided and employee fell off of the aluminum onto the wooden boat. Employee has multiple contusions to the left side of body.
August 14, 2012AL · Metal/Non-Metalbulldozer operator, universal operator, heavy equipment operator, operating engineerSLIP OR FALL OF PERSON
Employee was on the dredge cutting a cable when he realized the did not have his hammer. While retrieving his hammer he tripped over a lifting eye that was mounted to the floor of the dredge, falling against the cab injuring his left shoulder.
April 2, 2012AL · Metal/Non-Metalbulldozer operator, universal operator, heavy equipment operator, operating engineerHANDTOOLS (NONPOWERED)
WHILE HANGING A ROOT RAKE ON A DOZER, EMPLOYEE WAS HAMMERING ONE PIN IN WITH ANOTHER PIN SMASHING HIS RIGHT HAND LITTLE FINGER BETWEEN THE TWO PINS, SPLITTING IT OPEN.
2011 · 1 incident
July 21, 2011AL · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
While installing a drive shaft in an off road, shaft slipped pinching little finger on left hand between hydraulic pump and shaft causing a laceration.
2009 · 1 incident
December 18, 2009AL · Metal/Non-Metaloutside foreman, leadmanMACHINERY