SPRECKELS LIMESTONE&AGGREGATE PR has $818 in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at SPRECKELS LIMESTONE&AGGREGATE PR.
Fatalities
0
Total incidents
25
Years on record
1983–1995
Latest incident
May 1995
Compliance record
MSHA citations since 2000
10
citations
4
significant & substantial
$818
proposed penalties
$818
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
5
inspections on record
109
inspection hours
n/a
citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 109 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
SPRECKELS LIMESTONE&AGGREGATE PR has $818 in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$818
proposed penalties
$818
current assessed
$818
paid to date
$0
outstanding
10 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2001-08-22.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
THE DRIVER REPORTED LOSS OF POWER WAS TOLD NOT TO TRY TO CLIMB HILL BUT DID ANYWAY. STALLED ENGINE WHICH CAUSED EUC TO ROLL BACKWARD TO PIT HAUL ROAD WALL THEN SLOWLY TIPPED TO DRIVER'S SIDE.
REFUELING FORD DRILL TRUCK COMPLETED FUELIN GSTEPPED BACK TO REAR OF TRUCK. TRIED TO PLACE LEFT LEG ON LEFT REAR OF TRUCK. LEFT LEG SLIPPED OFF WHEN ON GROUND LEG HURT AND FELL DOWN.
1992 · 3 incidents
May 26, 1992CA · Metal/Non-Metalwarehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operatorHANDLING OF MATERIALS
June 1, 1991CA · Metal/Non-Metalwarehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operatorSLIP OR FALL OF PERSON
EMPLOYEE I.NAME WAS USING THE STATIONARY SHOP GRINDER WITHOUT USING THE FULL FACE SHIELD WHICH WAS AT THE STATION IN FULL VIEW. THUS A PIECE OF METAL FLEW AND STRUCK THE RIGHT EYE.
November 10, 1989CA · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
THE INJURED WAS STRUCK ON THE HARD HAT WITH A ROCK WHILE CLEANING UP UNDER CONVEYORS AND THE PRIMARY CRUSHER.THE INJURED SUFFERED WITH A HEADACHE AND A STIFF NECK.
February 6, 1989CA · Metal/Non-Metallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanHANDTOOLS (NONPOWERED)
EMPLOYEE WAS TRYING TO REMOVE WEDGED PIECE OF STRUCTURE WHEN IT BROKE FREE SPINNING AROUND STRIKING I.NAME IN THE CALF AREA OF RIGHT LEG THROWING HIM TO THE GROUND.
1988 · 1 incident
June 18, 1988CA · Metal/Non-Metaldrill helperMACHINERY
STEERING WHEEL 8PUN OUT OF DRIVERS HAND THRUSTING LEFT ELBOW AGAINST DOOR BRUISING ELBOW
1985 · 3 incidents
December 3, 1985CA · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
EMPLOYEE WAS TENDING CHUCK ON A VCR AIR TRACK DRILL HE WAS IN THE PROCESS OF REMOVING A TWELVE FOOT DRILL STEEL WHICH HAD A COUPLING ATTACHED TO THE TOP UPON REMOVAL THE COUPLING CAME LOOSE AN D FELL ON TO EMPLOYEES LEFT SHOULDER BLADE GIVING HIM A CONTUSION AND LOCAL SWELLING AND TENDERNESS
February 23, 1985CA · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
EMPLOYEE WAS REPAIRING THE BRAKES ON THE TD25 CAT AND WAS PULLING THE LEFT BRAKE FORK OUT WHICH WEIGHS APPROX. 60 LBS. AND HE INJURED HIS BACK.
1984 · 2 incidents
September 11, 1984CA · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techHANDLING OF MATERIALS
MECHANIC CHANGING TIRES ON REAR AXLE OF 65TD EUCLID WHEN A TIRE HE WAS GETTING READY TO SLING FELL ON HIS LEGS BROKEN RIGHT ANKLE & BROKEN LEFT SHOULDER.
March 24, 1984CA · Metal/Non-Metalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techMACHINERY
EMP WAS DRILLING AND THE COLLAR HUNG UP AND HE TRIED TO FREE IT WITH HIS BARE HAND AND IT JERKED HIS LEFT HAND BACK RESULTING IN A FRACTURED LEFT WRIST
For insurers, brokers, and safety consultants
The full compliance file on SPRECKELS LIMESTONE&AGGREGATE PR
A dated report covering the 26-year penalty trail, line-item violation pattern, contest and
docket posture, rate-normalized peer benchmark, and full fatality history. Delivered as a PDF
with the underlying data as CSV.