Mining Incidents

SPRINGVALLEY: 63 MSHA citations Metal/Non-Metal

Cemstone Ready Mix · Surface
SPRINGVALLEY, Pierce County, WI  ·  Intermittent
MSHA Mine ID: 4703528

SPRINGVALLEY has $14K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at SPRINGVALLEY.

Fatalities
0
Total incidents
10
Years on record
2009–2023
Latest incident
Jul 2023
Compliance record
MSHA citations since 2008
63
citations
18
significant & substantial
$13,651
proposed penalties
$13,651
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2008
25
inspections on record
365
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 365 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Imminent-danger orders
A Section 107(a) order removes miners from an area when an inspector finds an imminent danger. Each order is lifted once the condition is corrected, so this counts orders issued, not orders now in effect.
1
Section 107(a) orders
Most recent order: 2015-06-04.
On record since 2015.
Source: MSHA imminent-danger order records, updated weekly.

SPRINGVALLEY has $14K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$14K
proposed penalties
$14K
current assessed
$14K
paid to date
$0
outstanding
61 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2025-06-04.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
29.0%
significant & substantial
3.2%
high negligence or reckless
29.0%
reasonably likely or greater
53.2%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 35.5% low, 61.3% moderate, 3.2% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2021-05-25, 5 years ago
0%
of limit-tested samples over the exposure limit
8
samples
4
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg4
  • Nuisance dust, total, <1% Qtz2
  • Quartz, respirable, >1% Qtz2
Show the individual readings (8)
Date Contaminant Concentration Limit Conc / limit Occupation
2021-05-25 Nuisance dust, total, <1% Qtz 3.03 10 0.30 Crusher Oper/Worker
2021-05-25 Nuisance dust, total, <1% Qtz 0.72 10 0.07 Washer Operator
2018-06-20 Respirable dust, <.1mg 0 Washer Operator
2018-06-20 Respirable dust, <.1mg 0 Dry Screen Plant Operator
2018-06-20 Respirable dust, <.1mg 0 Front-end Loader Operator
2009-04-22 Quartz, respirable, >1% Qtz 0.31 1.94 0.16 Backhoe Operator
2009-04-22 Respirable dust, <.1mg 0 Front-end Loader Operator
2009-04-22 Quartz, respirable, >1% Qtz 0.63 0.84 0.75 Truck Driver
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Ownership history
  1. COUNTY MATERIALS CORP 2008 to 2024
  2. Cemstone Ready Mix 2024 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 3
2025 4
2024 3
2023 4
2022 4
2021 4
2020 5
2019 4
2018 4
2017 4
2016 7
2015 5
2014 4
2013 3
2012 3
2011 4
2010 4
2009 4
2008 3
Source: MSHA quarterly employment and production, updated weekly.

SPRINGVALLEY sits in Pierce County, Wisconsin, where the Census mining category is 0.1% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Pierce County, Wisconsin · Population 42,351
0.1%
Mining share of county employment
$88,802
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 2,599 0 0 0.0
2026 Q1 488 0 0 0.0
2025 Q4 2,591 0 0 0.0
2025 Q3 3,488 0 0 0.0
2025 Q2 2,073 3 1 1447.2
2025 Q1 413 0 0 0.0
2024 Q4 2,463 0 0 0.0
2024 Q3 2,067 0 0 0.0
Show 65 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 1,733 0 0 0.0
2024 Q1 0 0 0
2023 Q4 1,942 1 0 514.9
2023 Q3 3,344 3 1 897.1
2023 Q2 2,546 0 0 0.0
2023 Q1 0 0 0
2022 Q4 2,509 0 0 0.0
2022 Q3 3,527 4 0 1134.1
2022 Q2 2,413 0 0 0.0
2022 Q1 0 0 0
2021 Q4 2,360 0 0 0.0
2021 Q3 2,863 0 0 0.0
2021 Q2 2,710 3 2 1107.0
2021 Q1 0 0 0
2020 Q4 2,151 0 0 0.0
2020 Q3 2,930 1 0 341.3
2020 Q2 2,423 0 0 0.0
2020 Q1 957 0 0 0.0
2019 Q4 2,304 0 0 0.0
2019 Q3 2,991 0 0 0.0
2019 Q2 2,727 1 0 366.7
2019 Q1 0 0 0
2018 Q4 2,369 0 0 0.0
2018 Q3 3,234 0 0 0.0
2018 Q2 2,718 1 0 367.9
2018 Q1 0 0 0
2017 Q4 2,000 0 0 0.0
2017 Q3 2,958 2 0 676.1
2017 Q2 2,615 1 0 382.4
2017 Q1 0 0 0
2016 Q4 2,599 0 0 0.0
2016 Q3 3,239 0 0 0.0
2016 Q2 3,418 7 1 2048.0
2016 Q1 1,805 0 0 0.0
2015 Q4 2,926 0 0 0.0
2015 Q3 3,377 0 0 0.0
2015 Q2 2,853 12 9 4206.1
2015 Q1 771 0 0 0.0
2014 Q4 1,743 0 0 0.0
2014 Q3 2,312 1 0 432.5
2014 Q2 2,317 0 0 0.0
2014 Q1 0 0 0
2013 Q4 1,671 0 0 0.0
2013 Q3 2,162 3 0 1387.6
2013 Q2 2,148 0 0 0.0
2013 Q1 189 0 0 0.0
2012 Q4 2,210 0 0 0.0
2012 Q3 1,965 0 0 0.0
2012 Q2 1,821 0 0 0.0
2012 Q1 1 0 0 0.0
2011 Q4 1,229 3 1 2441.0
2011 Q3 2,499 5 0 2000.8
2011 Q2 1,516 0 0 0.0
2011 Q1 290 0 0 0.0
2010 Q4 1,518 0 0 0.0
2010 Q3 2,207 2 1 906.2
2010 Q2 2,202 0 0 0.0
2010 Q1 250 0 0 0.0
2009 Q4 1,871 0 0 0.0
2009 Q3 1,865 0 0 0.0
2009 Q2 63 3 1 47619.0
2009 Q1 54 0 0 0.0
2008 Q4 1,076 0 0 0.0
2008 Q3 1,414 2 0 1414.4
2008 Q2 1,299 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

10 on file

2023 · 1 incident

July 12, 2023 WI · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer MACHINERY
COUNTY MATERIALS CORP · Struck against a moving object

EE was in haul truck being loaded. The excavator scooped the 4th bucket, swung around to dump in truck but didn't have bucket high enough and hit left hand corner of haul truck box.

2022 · 1 incident

September 19, 2022 WI · Metal/Non-Metal miner, prospector, nec HANDTOOLS (NONPOWERED)
COUNTY MATERIALS CORP · Over-exertion in pulling or pushing objects

While pulling on a wrench to loosen a rusty bolt on a conveyor, EE felt a sharp pain in their back and front groin.

2017 · 1 incident

September 22, 2017 WI · Metal/Non-Metal miner, prospector, nec HANDTOOLS (NONPOWERED)
COUNTY MATERIALS CORP · Fall onto or against objects

EE Pulling on a wrench to tighten a bolt when the wrench slipped off the bolt and EE bumped their back on a rail as they moved backwards with the momentum. **Employee did not report this injury until 10-20-17**

2015 · 4 incidents

November 13, 2015 WI · Metal/Non-Metal beltman, conveyor man, conveyor belt worker, mobile bridge carrierman, feeder operator, conveyor rider HANDLING OF MATERIALS
COUNTY MATERIALS CORP · Over-exertion in lifting objects

Working on a conveyor, went to lift the guard when he felt pain in his lower back. Didn't treat until 11/16/2015.

November 7, 2015 WI · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman MACHINERY
COUNTY MATERIALS CORP · Struck by... (Not Elsewhere Classified)

Using a cutting torch to cut off a seized bearing a spark or piece of slag popped into his right ear. Did not seek medical attention until 11-13-15.

October 10, 2015 WI · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman MACHINERY
COUNTY MATERIALS CORP · Struck by... (Not Elsewhere Classified)

Working on the dual screener tightening a bolt using an impact gun when he pulled the trigger the bolt spun out and he cut his finger on the sharp edge of the bolt.

May 29, 2015 WI · Metal/Non-Metal drill operator HANDLING OF MATERIALS
COUNTY MATERIALS CORP · Over-exertion in lifting objects

Employee strained his lower back on 5/29/15 while changing a hydraulic hose on a drill. He did not seek treatment until 6/2/15. He has been taken off of work.

2012 · 1 incident

June 15, 2012 WI · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator POWERED HAULAGE
COUNTY MATERIALS CORP · Over-exertion (Not Elsewhere Classified)

Repetitive use of break pedal in pay loader caused left foot pain and swelling. Left foot injury.

2011 · 1 incident

November 10, 2011 WI · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
COUNTY MATERIALS CORP · Over-exertion (Not Elsewhere Classified)

To our knowledge, employee was getting out of a piece of equipment when he twisted his lower back and felt pain.

2009 · 1 incident

April 16, 2009 WI · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
COUNTY MATERIALS CORP · Struck by... (Not Elsewhere Classified)

Employee was cutting a rubber mat with a utility knife when the utility knife slipped off of the rail cutting the employee s lower right leg.