Mining Incidents

Surface No 2: 54 MSHA citations Coal

Controlled by Billy Wright
Moon, Morgan County, KY  ·  Abandoned
MSHA Mine ID: 1514015

Surface No 2 has $6K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Surface No 2.

Fatalities
0
Total incidents
2
Years on record
2003–2005
Latest incident
Sep 2005
Compliance record
MSHA citations since 2000
54
citations
30
significant & substantial
$5,770
proposed penalties
$5,770
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
40
inspections on record
592
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 592 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Surface No 2 has $6K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$6K
proposed penalties
$6K
current assessed
$6K
paid to date
$0
outstanding
54 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2005-11-28.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
55.6%
significant & substantial
0.0%
high negligence or reckless
55.6%
reasonably likely or greater
13.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 1.9% low, 98.1% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.

MSHA sampling at Surface No 2 shows 100% of 32 respirable coal dust samples met the 1.5 mg/m3 standard.

Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2006-06-01, 20 years ago
100%
within 1.5 mg/m3
32
samples
0.68
dust max (mg/m3)
32 samples taken by MSHA inspectors, 0 by the operator.
Most-sampled occupations
  • BULLDOZER OPERATOR18
  • HIGHLIFT OPERATOR/FRONT END LOADER8
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE2

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2006-06-06, 20 years ago
18%
over PEL
17
samples
Most-sampled occupations
  • BULLDOZER OPERATOR10
  • HIGHLIFT OPERATOR/FRONT END LOADER4
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE2
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Health sampling trend
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Year within 1.5 mg/m3 samples
2006 100% 3
2005 100% 6
2004 100% 3
2003 100% 7
2002 100% 4
2001 100% 5
2000 100% 4
Noise by year
Year over PEL samples
2006 0% 4
2005 0% 3
2003 29% 7
2001 33% 3
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Surface No 2 recorded 0.00 reportable injury cases per 100 full-time workers in 2006.

Injury rate, 2006
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US coal mining average was 4.87 and the all-US-mining average was 3.91 cases per 100 workers.
In Kentucky, coal mining averaged 5.96 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Mine Rite Coal Co Inc 1983 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year Employees Coal produced (tons)
2007 4 15,276
2006 10 68,762
2005 7 54,976
2004 7 54,605
2003 7 57,599
2002 5 36,389
2001 5 41,343
2000 5 40,253
Source: MSHA quarterly employment and production, updated weekly.

Surface No 2 sits in Morgan County, Kentucky, where the Census mining category is 0.6% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Morgan County, Kentucky · Population 13,938
0.6%
Mining share of county employment
$47,493
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2007 Q4 0 0 0
2007 Q3 875 0 0 0.0
2007 Q2 1,574 0 0 0.0
2007 Q1 5,661 0 0 0.0
2006 Q4 7,800 0 0 0.0
2006 Q3 6,198 0 0 0.0
2006 Q2 6,527 0 0 0.0
2006 Q1 5,084 0 0 0.0
Show 24 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2005 Q4 4,917 6 4 1220.3
2005 Q3 4,897 0 0 0.0
2005 Q2 4,797 3 0 625.4
2005 Q1 4,110 0 0 0.0
2004 Q4 4,420 0 0 0.0
2004 Q3 4,440 0 0 0.0
2004 Q2 4,966 19 15 3826.0
2004 Q1 4,450 0 0 0.0
2003 Q4 4,550 13 6 2857.1
2003 Q3 4,258 0 0 0.0
2003 Q2 4,259 1 0 234.8
2003 Q1 3,750 0 0 0.0
2002 Q4 3,608 0 0 0.0
2002 Q3 3,179 0 0 0.0
2002 Q2 2,465 1 0 405.7
2002 Q1 2,383 0 0 0.0
2001 Q4 2,980 2 1 671.1
2001 Q3 2,657 1 0 376.4
2001 Q2 3,506 0 0 0.0
2001 Q1 2,658 0 0 0.0
2000 Q4 2,963 0 0 0.0
2000 Q3 3,064 2 0 652.7
2000 Q2 3,210 0 0 0.0
2000 Q1 3,068 1 0 325.9
No fatalities recorded at this mine.

Reportable incidents

2 on file

2005 · 1 incident

September 29, 2005 KY · Coal maintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service tech HANDLING OF MATERIALS
Mine Rite Coal Co Inc · Struck by falling object

LOWERING THUMB ON EXCAVATOR REMOVING PIN ON THUMB FELL ON END OF THUMB TIP.

2003 · 1 incident

March 28, 2003 KY · Coal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Mine Rite Coal Co Inc · HANDLING OF MATERIALS

HE CAME DOWN LADDER FORWARD AND HUNG RING FINGER ON CAT WALK AND CUT SKIN OFF FINGER AND CUT TIP OF FINGER.