Mining Incidents

The Standard Mine: 94 MSHA citations Metal/Non-Metal

Double D Mining LLC · Surface
Controlled by Santokh Toor
Blythe, Riverside County, CA  ·  Active
MSHA Mine ID: 0405663

The Standard Mine has $62K in proposed MSHA penalties and $45K outstanding across 4 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at The Standard Mine.

Fatalities
0
Total incidents
2
Years on record
2012–2017
Latest incident
Jun 2017
Compliance record
MSHA citations since 2006
94
citations
37
significant & substantial
$62,436
proposed penalties
$17,673
paid to date
28% of proposed penalties paid to date, a $44,763 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2006
57
inspections on record
836
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 836 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

The Standard Mine has $62K in proposed MSHA penalties and $45K outstanding across 4 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$62K
proposed penalties
$62K
current assessed
$18K
paid to date
$45K
outstanding
92 assessments are final orders; 4 contested dockets.
Of $17K in penalties contested before the Commission, $17K was upheld in final decisions.
As of the most recent assessment on 2026-02-19.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
39.8%
significant & substantial
28.0%
high negligence or reckless
39.8%
reasonably likely or greater
40.9%
permanently disabling or fatal if injury occurs
Negligence coding: 2.2% none, 11.8% low, 58.1% moderate, 28.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
5 citations taken to the federal commission · 5% of citations on record
  • Settled 3 · 60%
  • Stood as issued 2 · 40%
67%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 3 decided S&S contests · industry: 79%
0%
Penalty reduction in decided contests
$17K proposed, $17K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2019-07-30.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
WEST 2008-1491M Default Lewis 2011 $17K → $17K
WEST 2019-0478 Settlement Miller 2019 $121 → $121
WEST 2009-1009M Settlement Bulluck 2012 $108 → $108
WEST 2009-479M Settlement Lesnick 2010 $100 → $100
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2020-06-03, 6 years ago
0%
of limit-tested samples over the exposure limit
6
samples
2
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg4
  • Nuisance dust, respirable, <1% Qtz1
  • Quartz, respirable, >1% Qtz1
Show the individual readings (6)
Date Contaminant Concentration Limit Conc / limit Occupation
2020-06-03 Respirable dust, <.1mg 0 Dry Screen Plant Operator
2020-06-03 Respirable dust, <.1mg 0 Truck Driver
2017-03-29 Respirable dust, <.1mg 0 Front-end Loader Operator
2009-02-10 Quartz, respirable, >1% Qtz 0.44 2.73 0.16 Cutting Mach Operator
2009-02-10 Respirable dust, <.1mg 0 Dry Screen Plant Operator
2006-03-29 Nuisance dust, respirable, <1% Qtz 0.29 10 0.03 Mechanic
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

The Standard Mine recorded 0.00 reportable injury cases per 100 full-time workers in 2020.

Injury rate, 2020
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US metal and nonmetal mining average was 1.77 and the all-US-mining average was 2.08 cases per 100 workers.
In California, metal and nonmetal mining averaged 1.80 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2020 * 0.00 0.00 0.000
2019 * 0.00 0.00 0.000
2018 * 0.00 0.00 0.000
2017 * 7.01 7.01 0.000
2012 * 7.64 7.64 0.000
2010 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. Sun Services Inc 2006 to 2013
  2. Double D Mining LLC 2014 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 4
2025 3
2024 3
2023 3
2022 7
2021 11
2020 15
2019 22
2018 22
2017 14
2016 12
2013 6
2012 13
2011 10
2010 12
2009 10
2008 6
2007 7
2006 5
Source: MSHA quarterly employment and production, updated weekly.

The Standard Mine sits in Riverside County, California, where the Census mining category is 0.1% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Riverside County, California · Population 2,449,909
0.1%
Mining share of county employment
$89,672
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 595 0 0 0.0
2026 Q1 275 3 2 10909.1
2025 Q4 520 0 0 0.0
2025 Q3 500 0 0 0.0
2025 Q2 400 0 0 0.0
2025 Q1 550 0 0 0.0
2024 Q4 580 1 0 1724.1
2024 Q3 875 0 0 0.0
Show 58 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 908 0 0 0.0
2024 Q1 594 2 0 3367.0
2023 Q4 1,106 0 0 0.0
2023 Q3 1,015 3 0 2955.7
2023 Q2 1,349 0 0 0.0
2022 Q3 2,933 0 0 0.0
2022 Q2 2,442 1 0 409.5
2022 Q1 2,302 2 0 868.8
2021 Q4 2,857 0 0 0.0
2021 Q3 3,970 0 0 0.0
2021 Q2 4,451 0 0 0.0
2021 Q1 3,789 1 0 263.9
2020 Q4 4,851 0 0 0.0
2020 Q3 5,029 0 0 0.0
2020 Q2 7,236 1 0 138.2
2020 Q1 8,332 0 0 0.0
2019 Q4 9,848 1 0 101.5
2019 Q3 10,030 0 0 0.0
2019 Q2 10,292 4 1 388.7
2019 Q1 11,213 2 0 178.4
2018 Q4 11,674 0 0 0.0
2018 Q3 9,389 0 0 0.0
2018 Q2 10,917 1 0 91.6
2018 Q1 9,950 1 0 100.5
2017 Q4 10,508 2 1 190.3
2017 Q3 6,892 0 0 0.0
2017 Q2 5,261 4 3 760.3
2017 Q1 5,865 1 0 170.5
2016 Q4 5,659 2 0 353.4
2013 Q2 0 0 0
2013 Q1 5,377 3 1 557.9
2012 Q4 8,695 0 0 0.0
2012 Q3 7,233 0 0 0.0
2012 Q2 6,070 0 0 0.0
2012 Q1 4,169 0 0 0.0
2011 Q4 4,121 2 0 485.3
2011 Q2 4,975 0 0 0.0
2011 Q1 5,238 4 2 763.7
2010 Q4 4,979 0 0 0.0
2010 Q3 5,014 1 0 199.4
2010 Q2 4,163 7 4 1681.5
2010 Q1 5,938 0 0 0.0
2009 Q4 5,858 6 4 1024.2
2009 Q3 4,126 0 0 0.0
2009 Q2 4,902 1 0 204.0
2009 Q1 4,376 1 0 228.5
2008 Q4 3,021 7 2 2317.1
2008 Q3 3,060 1 1 326.8
2008 Q2 2,831 9 4 3179.1
2008 Q1 2,440 0 0 0.0
2007 Q4 3,269 9 6 2753.1
2007 Q3 4,216 0 0 0.0
2007 Q2 3,080 1 1 324.7
2007 Q1 1,858 0 0 0.0
2006 Q4 2,520 3 2 1190.5
2006 Q3 2,760 1 0 362.3
2006 Q2 3,240 1 0 308.6
2006 Q1 3,240 1 1 308.6
No fatalities recorded at this mine.

Reportable incidents

2 on file

2017 · 1 incident

June 7, 2017 CA · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer MACHINERY
Double D Mining LLC · Struck against a moving object

While preparing the pad to load hauling trucks; the side wall gave out causing the excavator to slide down approximately 12 to 15 feet; once the excavator got to the bottom, it tipped on it's side.

2012 · 1 incident

October 19, 2012 CA · Metal/Non-Metal welder (shop) MACHINERY
Sun Services Inc · Contact with hot objects or substances

Clear night, no wind. Employee was welding when a hot piece of slag fell and burned threw the tongue of his boot burning into his foot.