EMPLOYEE WAS ATTEMPTING TO REPAIR A BROKEN CHAINON THE DM 45 INGERSOL DRILL. WHILE STANDING ON THE ROTARY HEAD WHICH WAS APPROX 15' ABOVE THE GROUND THE OPPOSITE CHAIN BROKE AND ALLOWED THE ROTARY HEAD TO FREE FALL APPROX 12' WHILE HE WAS STANDING ON IT. THE IMPACT OF THE FALL CAUSED HIS INJURY.
Tiger Mine: 48 MSHA citations Coal
Tiger Mine has $17K in proposed MSHA penalties and $11K outstanding across 0 contested dockets, plus health sampling and the full incident record.
Watch this mine
Email me when a new MSHA incident is filed at Tiger Mine.
- Fatalities
- 0
- Total incidents
- 26
- Years on record
- 1998–2001
- Latest incident
- Sep 2001
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Tiger Mine has $17K in proposed MSHA penalties and $11K outstanding across 0 contested dockets.
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.MSHA sampling at Tiger Mine shows 95% of 42 respirable coal dust samples met the 1.5 mg/m3 standard.
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2001-11-13, 24 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.- BULLDOZER OPERATOR16
- REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE16
- HIGHLIFT OPERATOR/FRONT END LOADER8
Silica (quartz)
Last sampled: 2001-05-21, 25 years ago- REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE4
- BULLDOZER OPERATOR3
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2001-05-09, 25 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.- REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE8
- HIGHLIFT OPERATOR/FRONT END LOADER6
- BULLDOZER OPERATOR4
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.| Year | within 1.5 mg/m3 | samples |
|---|---|---|
| 2001 | 88% | 17 |
| 2000 | 100% | 25 |
| Year | silica avg (%) | samples |
|---|---|---|
| 2001 | 4.2 | 4 |
| 2000 | 5.5 | 3 |
| Year | over PEL | samples |
|---|---|---|
| 2001 | 0% | 10 |
| 2000 | 13% | 8 |
Tiger Mine recorded 36.85 reportable injury cases per 100 full-time workers in 2001.
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2001 * | 36.85 | 10.53 | 0.000 |
| 2000 * | 9.06 | 9.06 | 0.000 |
- Midwest Coal Llc 1997 to present
ⓘ
Coal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.| Year | Employees | Coal produced (tons) |
|---|---|---|
| 2001 | 31 | 176,708 |
| 2000 | 35 | 248,754 |
Tiger Mine sits in Bates County, Missouri, where the Census mining category is 0.4% of county employment.
ⓘ
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.ⓘ
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.| Quarter | Hours worked | Citations | S&S | Per 1M hrs |
|---|---|---|---|---|
| 2001 Q4 | 2,722 | 8 | 2 | 2939.0 |
| 2001 Q3 | 21,707 | 4 | 4 | 184.3 |
| 2001 Q2 | 27,058 | 3 | 3 | 110.9 |
| 2001 Q1 | 24,496 | 0 | 0 | 0.0 |
| 2000 Q4 | 21,158 | 3 | 1 | 141.8 |
| 2000 Q3 | 18,007 | 7 | 2 | 388.7 |
| 2000 Q2 | 24,174 | 6 | 4 | 248.2 |
| 2000 Q1 | 24,997 | 15 | 12 | 600.1 |
Reportable incidents
26 on file2001 · 14 incidents
HE CLAIMS HE HIT BUMP IN ROAD & HURT BACK. WENT TO DOCTOR WHO FOUND NOTHING WRONG. CLAIM WAS MADE 2 HRS AFTER EE WAS FIRED FOR MISUSE OF TRUCK &GETTING IN FIGHT WITH ANOTHER EMPLOYEE.
PRYING ON BAR WHILE WORKING ON TRUCK. BAR SLIPPED THROWING HIM INTO THE TRUCK.
WELDING ON 777, TRIPPED OVER WELDING LEADS LANDING ON BACK. CRACKED LEFT WRIST.
WAS LOADING HOLES GOT TOO HOT AND HAD A HEAT STROKE.
UNLOADING METAL.
WELDING ON D9 PIECE OF METAL HIT EYE.
MOVING BATTERY TO GET BOOSTER CABLE WHEN BATTERY BLEW UP.
GETTING OFF D7 DOZER.
CUTTING WIRE TO THE AIR HOSE UP KEEP FROM DRAGGING.
CLIMBING OFF D9 WHEN FELL HIT RIGHT KNEE ON TRACK.
THE WIPERS WERE STUCK IN UP POSITION, WAS TRYING TO BRAKE LOOSE, WIPER CAME LOOSE A METAL PIECE CUT HIS HAND.
WAS PATCHING CRACK ON LOADER, WHEN METAL FELL INTO EYES.
WAS WALKING UP STEPS, SLIPPED AND HIT HIT ELBOW ON STEPS.
2000 · 4 incidents
WAS PUTTING BELT ON CRUSHER WHEN WRIST POPPED.
WAS USING POWER WASHER ON MECHANICS TRUCK, SLIPPED ON MUD. POWER WASHER TIP HIT TOP OF FOOT, WATER & STEAM WENT THROUGH BOOT AND BURNT FOOT.
EE BACKED UP TO EDGE UNSQUARE AND RIGHT SIDE TIRES DROPPED OFF FILL. NOTHING GAVEWAY, EE APPEARED TO HAVE MISJUDGED WHERE HE WAS AT. TRUCK DID A 180 DEGREE TURN LANDING WITH ALL SIX TIRES IN THE AIR.
WAS ATTEMPTING TO BREAK LOOSE BOLTS OUT OF REAR END WHEN PULLED MUSCLE IN CHEST.
1999 · 7 incidents
CHANGING OIL ON DRILL, HE SLIPPED AND HIT RIGHT ELBOW.
LOADER DROPPED BIG ROCK IN BED OF TRUCK AND JAMMED HIS BACK.
EE STEPPED OFF LOADER INTO HOLE FILLED WITH WATER AND TWISTED LEFT ANKLE.
EE WAS CARRYING 1/2 SHEET METAL AND SLIPPED ON MUD AND STRAINED UPPER BACK.
EE WAS CLIMBING LADDER TO WORK ON 992 LOADER AND SLIPPED ON LADDFER AND FELL STRIKING LEFT ELBOW.
EE WAS WORKING ON COAL SCREENING UNIT & SCREEN FELL ON RT ARM & WRIST
WORKING ON DOZER BLADE, WAS HIT IN LEFT ARM WITH SLEDGE HAMMER WHEN HEAD CAME OFF.
1998 · 1 incident
EE WORKING ON BULLDOZER, REPAIRING HYD LEAK SLIPPED AND FELL ON ELBOW CAUSING ELBOW TO SWELL.