Mining Incidents

Tony J Beltramo & Sons Inc: 197 MSHA citations Metal/Non-Metal

Pueblo, Pueblo County, CO  ·  Intermittent
MSHA Mine ID: 0503875

Tony J Beltramo & Sons Inc has $64K in proposed MSHA penalties and $0 outstanding across 16 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Tony J Beltramo & Sons Inc.

Fatalities
0
Total incidents
2
Years on record
2002
Latest incident
Oct 2002
Compliance record
MSHA citations since 2001
197
citations
68
significant & substantial
$63,596
proposed penalties
$46,783
paid to date
74% of proposed penalties paid to date, a $16,813 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
52
inspections on record
755
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 755 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Tony J Beltramo & Sons Inc has $64K in proposed MSHA penalties and $0 outstanding across 16 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$64K
proposed penalties
$47K
current assessed
$47K
paid to date
$0
outstanding
179 assessments are final orders; 16 contested dockets.
Of $47K in penalties contested before the Commission, $29K was upheld in final decisions.
As of the most recent assessment on 2025-11-18.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
38.0%
significant & substantial
17.9%
high negligence or reckless
38.0%
reasonably likely or greater
63.1%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 14.5% low, 67.6% moderate, 17.9% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
98 citations taken to the federal commission · 50% of citations on record
  • Settled 70 · 71%
  • Stood as issued 26 · 27%
  • Vacated or withdrawn 2 · 2%
93%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 46 decided S&S contests · industry: 79%
36%
Penalty reduction in decided contests
$39K proposed, $25K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2015-01-05.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
WEST 2007-207M Settlement Manning 2007 $12K → $3K
WEST 2004-52-M Dismissal Manning 2004 $8K → $4K
WEST 2011-661M Settlement Andrews 2012 $5K → $4K
WEST 2008-898M Settlement Manning 2009 $4K → $2K
WEST 2011-660M Settlement Andrews 2012 $4K → $4K
WEST 2012-230M Default Lesnick 2012 $3K → $3K
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2024-09-11
10
samples
0
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg8
  • Quartz, respirable, >1% Qtz1
  • Unlisted Particulate, respirable, <1% Qtz1
Show the individual readings (10)
Date Contaminant Concentration Limit Conc / limit Occupation
2024-09-11 Respirable dust, <.1mg 0 Front-end Loader Operator
2018-10-30 Respirable dust, <.1mg 0 Crusher Oper/Worker
2018-10-30 Respirable dust, <.1mg 0 Front-end Loader Operator
2018-10-30 Unlisted Particulate, respirable, <1% Qtz 0.26 Front-end Loader Operator
2018-10-30 Quartz, respirable, >1% Qtz 0.21 Bulldozer Operator
2014-04-16 Respirable dust, <.1mg 0 Crusher Oper/Worker
2010-12-08 Respirable dust, <.1mg 0 Crusher Oper/Worker
2010-12-08 Respirable dust, <.1mg 0 Scale Man
2010-03-11 Respirable dust, <.1mg 0 Dry Screen Plant Operator
2010-03-11 Respirable dust, <.1mg 0 Front-end Loader Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Ownership history
  1. Tony J Beltramo & Sons Inc 1983 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 2
2025 2
2024 2
2023 3
2021 3
2020 4
2019 4
2018 4
2017 3
2016 3
2015 3
2014 3
2013 3
2012 3
2011 2
2010 1
2009 2
2008 2
2007 3
2006 2
2005 2
2004 3
2003 4
2002 4
2001 4
2000 2
Source: MSHA quarterly employment and production, updated weekly.

Tony J Beltramo & Sons Inc sits in Pueblo County, Colorado, where the Census mining category is 0.2% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Pueblo County, Colorado · Population 168,726
0.2%
Mining share of county employment
$62,250
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 160 0 0 0.0
2026 Q1 0 0 0
2025 Q4 0 2 2
2025 Q3 104 9 3 86538.5
2025 Q2 340 0 0 0.0
2025 Q1 89 0 0 0.0
2024 Q4 313 0 0 0.0
2024 Q3 260 0 0 0.0
Show 90 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 484 3 2 6198.3
2024 Q1 450 0 0 0.0
2023 Q4 500 0 0 0.0
2023 Q3 173 5 0 28901.7
2023 Q2 197 0 0 0.0
2021 Q2 235 0 0 0.0
2021 Q1 413 0 0 0.0
2020 Q4 712 2 0 2809.0
2020 Q3 195 0 0 0.0
2020 Q2 1,573 0 0 0.0
2020 Q1 1,723 6 1 3482.3
2019 Q4 1,833 0 0 0.0
2019 Q3 356 0 0 0.0
2019 Q2 1,352 0 0 0.0
2019 Q1 948 0 0 0.0
2018 Q4 943 4 2 4241.8
2018 Q3 2,109 0 0 0.0
2018 Q2 1,768 1 0 565.6
2018 Q1 2,712 0 0 0.0
2017 Q4 2,324 3 0 1290.9
2017 Q3 1,576 4 0 2538.1
2017 Q2 1,329 0 0 0.0
2017 Q1 1,215 2 0 1646.1
2016 Q4 250 0 0 0.0
2016 Q3 670 2 1 2985.1
2016 Q2 1,436 7 1 4874.7
2016 Q1 1,548 1 0 646.0
2015 Q4 1,450 0 0 0.0
2015 Q3 1,967 0 0 0.0
2015 Q2 1,383 0 0 0.0
2015 Q1 1,321 0 0 0.0
2014 Q4 1,293 14 4 10827.5
2014 Q3 1,658 0 0 0.0
2014 Q2 1,322 4 2 3025.7
2014 Q1 1,177 2 1 1699.2
2013 Q4 1,145 0 0 0.0
2013 Q3 1,487 2 1 1345.0
2013 Q2 1,115 0 0 0.0
2013 Q1 1,122 0 0 0.0
2012 Q4 1,908 4 2 2096.4
2012 Q3 1,080 0 0 0.0
2012 Q2 1,091 0 0 0.0
2012 Q1 1,671 4 1 2393.8
2011 Q4 1,158 0 0 0.0
2011 Q3 772 12 6 15544.0
2011 Q2 1,158 0 0 0.0
2011 Q1 1,158 0 0 0.0
2010 Q4 0 16 12
2010 Q3 0 0 0
2010 Q2 1,158 0 0 0.0
2010 Q1 1,158 13 5 11226.3
2009 Q4 1,342 0 0 0.0
2009 Q3 1,636 0 0 0.0
2009 Q2 1,153 0 0 0.0
2009 Q1 1,212 0 0 0.0
2008 Q4 1,096 1 0 912.4
2008 Q3 1,144 0 0 0.0
2008 Q2 1,103 0 0 0.0
2008 Q1 1,017 2 1 1966.6
2007 Q4 1,560 0 0 0.0
2007 Q3 1,560 14 1 8974.4
2007 Q2 1,560 0 0 0.0
2007 Q1 1,560 0 0 0.0
2006 Q4 1,040 0 0 0.0
2006 Q3 1,040 43 12 41346.2
2006 Q2 1,040 0 0 0.0
2006 Q1 1,040 0 0 0.0
2005 Q4 1,040 0 0 0.0
2005 Q3 1,040 0 0 0.0
2005 Q2 1,040 0 0 0.0
2005 Q1 1,040 0 0 0.0
2004 Q4 1,040 0 0 0.0
2004 Q3 0 0 0
2004 Q2 2,080 0 0 0.0
2004 Q1 3,680 0 0 0.0
2003 Q4 1,986 0 0 0.0
2003 Q3 2,080 5 2 2403.8
2003 Q2 2,632 0 0 0.0
2003 Q1 2,155 0 0 0.0
2002 Q4 2,101 5 3 2379.8
2002 Q2 2,080 0 0 0.0
2002 Q1 960 0 0 0.0
2001 Q4 2,080 0 0 0.0
2001 Q3 720 3 3 4166.7
2001 Q2 1,315 0 0 0.0
2001 Q1 2,080 0 0 0.0
2000 Q4 1,920 0 0 0.0
2000 Q3 0 0 0
2000 Q2 0 0 0
2000 Q1 1,740 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

2 on file

2002 · 2 incidents

October 18, 2002 CO · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDTOOLS (NONPOWERED)
Tony J Beltramo & Sons Inc · Struck against stationary object

3 EE'S WERE USING A MECHANICAL SCREW JACK TO RAISE A PORTION OF THE CONE CRUSHER & SCREEN DECK FOR LEVELING PURPOSES. JACK BASE PLACEMENT WAS ON A PIECE OF STEEL I-BEAM 5 1/4" WIDE. JACK BASE WAS 6 1/2" CIRCUMFERENCE. JACK BASE NOT SUPPORTED SQUARELY ON A FIRM LIFTING SURFACE. EE'S USED 94" CHEATER BAR TO PUT PRESSURE ON JACK BASE, CAUSING BASE TO BREAK & THROW EE'S AGAINST BARRIER

October 18, 2002 CO · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDTOOLS (NONPOWERED)
Tony J Beltramo & Sons Inc · Struck against stationary object

3 EE'S WERE USING A MECHANICAL SCREW JACK TO RAISE A PORTION OF THE CONE CRUSHER & SCREEN DECK FOR LEVELING PURPOSES. THE JACK FAILED RESULTING IN INJURY TO 2 OF THE EE'S. THE JACK BASE WAS N OT SUPPORTED SQUARELY ON FIRM LIFTING SURFACE. JACK FAILED USING A CHEATER BAR PUTTING PRESSUREON UNSUPPORTED BASE OF THE JACK CAUSING IT TO BREAK. THREW EE'S AGAINST CONCRETE SUPPORT BARRIER