Mining Incidents

UNIT NO. 249: 21 MSHA citations Metal/Non-Metal

Fairmont, Martin County, MN  ·  Abandoned
MSHA Mine ID: 2102715

UNIT NO. 249 has $4K in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at UNIT NO. 249.

Fatalities
0
Total incidents
4
Years on record
1990–2003
Latest incident
Sep 2003
Compliance record
MSHA citations since 2000
21
citations
4
significant & substantial
$4,094
proposed penalties
$4,094
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
5
inspections on record
72
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 72 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

UNIT NO. 249 has $4K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$4K
proposed penalties
$4K
current assessed
$4K
paid to date
$0
outstanding
21 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2003-12-15.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
19.0%
significant & substantial
4.8%
high negligence or reckless
19.0%
reasonably likely or greater
76.2%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 4.8% low, 90.5% moderate, 4.8% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2000-07-26, 26 years ago
33%
of limit-tested samples over the exposure limit
4
samples
3
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz31 over
  • Respirable dust, <.1mg1
Show the individual readings (4)
Date Contaminant Concentration Limit Conc / limit Occupation
2000-07-26 Quartz, respirable, >1% Qtz 1.09 0.88 1.24 Crusher Oper/Worker
2000-07-26 Quartz, respirable, >1% Qtz 0.36 2.98 0.12 Bulldozer Operator
2000-07-26 Respirable dust, <.1mg 0 Crusher Oper/Worker
2000-07-26 Quartz, respirable, >1% Qtz 0.58 3.28 0.18 Bulldozer Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Ownership history
  1. Duininck Brothers & Gilchrist 1979 to 1980
  2. W Hodgman & Sons Inc 1980 to 1999
  3. W Hodgman & Sons Inc 1999 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2004 1
2003 6
2002 5
2001 5
2000 8
Source: MSHA quarterly employment and production, updated weekly.

UNIT NO. 249 sits in Martin County, Minnesota, where the Census mining category is 0.0% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Martin County, Minnesota · Population 19,864
0.0%
Mining share of county employment
$62,969
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2004 Q1 150 0 0 0.0
2003 Q4 2,760 1 0 362.3
2003 Q3 5,880 8 1 1360.5
2003 Q2 4,380 0 0 0.0
2003 Q1 1,280 0 0 0.0
2002 Q3 3,780 0 0 0.0
2002 Q2 4,320 0 0 0.0
2002 Q1 60 0 0 0.0
Show 8 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2001 Q4 2,760 0 0 0.0
2001 Q3 4,840 7 1 1446.3
2001 Q2 4,020 0 0 0.0
2001 Q1 50 0 0 0.0
2000 Q4 2,100 0 0 0.0
2000 Q3 4,080 5 2 1225.5
2000 Q2 3,960 0 0 0.0
2000 Q1 2,440 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

4 on file

2003 · 1 incident

September 11, 2003 MN · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler SLIP OR FALL OF PERSON
W Hodgman & Sons Inc · Over-exertion (Not Elsewhere Classified)

EE WAS WORKING ON A CONVEYOR, WHEN HE SLIPPED TWISTING HIS KNEE.

2001 · 1 incident

August 1, 2001 MN · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
W Hodgman & Sons Inc · Caught in, under or between (Not Elsewhere Classified)

EE WAS TIGHTENING A NUT W/ HIS 3/4" DRIVE WHEN IT SLIPPED AND SMASHED HIS FINGER BETWEEN THE WRENCH AND A METAL CRUSHER, CUTTING HIS FINGER.

1990 · 2 incidents

August 6, 1990 MN · Metal/Non-Metal greaser, grease man, oiler, lube man, dragline oiler HANDTOOLS (NONPOWERED)
W Hodgman & Sons Inc · Struck by... (Not Elsewhere Classified)

HE WAS DOING SOME REPAIR WORK USING A HAMMER, WHEN HE MISCALCULATED AND HIT HIS FINGER. SPLITTING IT OPEN.