citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 675 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Wiley Area 80 has $5K in proposed MSHA penalties and $72 outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$5K
proposed penalties
$5K
current assessed
$5K
paid to date
$72
outstanding
55 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2006-11-28.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
MSHA sampling at Wiley Area 80 shows 99% of 70 respirable coal dust samples met the 1.5 mg/m3 standard.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust
ⓘRespirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2006-05-19, 20 years ago
99%
within 1.5 mg/m3
70
samples
2.27
dust max (mg/m3)
48 samples taken by MSHA inspectors, 22 by the operator.
Noise
ⓘThe share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Health sampling trend
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
ⓘRespirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Wiley Area 80 recorded 0.00 reportable injury cases per 100 full-time workers in 2006.
Injury rate, 2006
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 4.87 and the all-US-mining average was 3.91 cases per 100 workers.
In Kentucky, coal mining averaged 5.96 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year
total case rate
days-away
fatal
2006 *
0.00
0.00
0.000
2005 *
4.29
0.00
0.000
2004 *
0.00
0.00
0.000
2003 *
0.00
0.00
0.000
2002 *
0.00
0.00
0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
ⓘCoal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year
Employees
Coal produced (tons)
2007
0
2006
21
222,827
2005
39
485,473
2004
22
349,782
2003
49
376,605
2002
65
384,929
2001
10
Source: MSHA quarterly employment and production, updated weekly.
Wiley Area 80 sits in Knott County, Kentucky, where the Census mining category is 2.8% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Knott County, Kentucky · Population 14,046
2.8%
Mining share of county employment
$37,736
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2007 Q1
0
0
0
2006 Q4
3,971
2
2
503.7
2006 Q3
6,915
3
2
433.8
2006 Q2
15,014
0
0
0.0
2006 Q1
25,164
4
4
159.0
2005 Q4
22,239
0
0
0.0
2005 Q3
23,393
0
0
0.0
2005 Q2
23,827
3
0
125.9
Show 14 earlier quartersHide earlier quarters
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2005 Q1
23,877
0
0
0.0
2004 Q4
18,748
0
0
0.0
2004 Q3
15,793
0
0
0.0
2004 Q2
12,666
3
1
236.9
2004 Q1
13,472
1
1
74.2
2003 Q4
16,476
0
0
0.0
2003 Q3
18,392
2
1
108.7
2003 Q2
20,124
0
0
0.0
2003 Q1
23,193
2
0
86.2
2002 Q4
20,270
0
0
0.0
2002 Q3
18,586
4
2
215.2
2002 Q2
17,668
0
0
0.0
2002 Q1
18,751
3
0
160.0
2001 Q4
2,458
0
0
0.0
No fatalities recorded at this mine.
Reportable incidents
3 on file
2005 · 2 incidents
September 7, 2005KY · Coalcrane operator, mobile equipment operator (meo), dragline operator, dropball operator, riggerMACHINERY
OPERATING BULLDOZER. DOZER ROLLED OVER WHEN EE LOST CONTROL WHILE RECLAIMING STEEP SLOPE. THE DOZER GOT ONTO A TREE TRUNK WHICH CAUSED IT TO SLIDE. EE WAS WEARING HIS SEAT BELT; HOWEVER, HE STRUCK A HARD SURFACE INSIDE CAB, CAUSING AN INJURY (LACERATIONS TO FACE).
April 4, 2005KY · Coalbulldozer operator, universal operator, heavy equipment operator, operating engineerDISORDERS (REPEATED TRAUMA)
WHILE WORKING ON A PICK-UP THAT HAD A FLAT, EE PICKED UP A ROCK TO SCOTCH THE WHEEL, HE PICKED UP THE ROCK & TURNED HIS BODY AT THE WAIST & FELT A SHARP PAIN IN HIS BACK.