citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 258 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Yeshic Mine has $5K in proposed MSHA penalties and $0 outstanding across 0 contested dockets.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$5K
proposed penalties
$5K
current assessed
$5K
paid to date
$0
outstanding
23 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2011-04-06.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
MSHA sampling at Yeshic Mine shows 100% of 37 respirable coal dust samples met the 1.5 mg/m3 standard.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust
ⓘRespirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2011-12-14, 14 years ago
100%
within 1.5 mg/m3
37
samples
0.46
dust max (mg/m3)
35 samples taken by MSHA inspectors, 2 by the operator.
Noise
ⓘThe share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Health sampling trend
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust by year
ⓘRespirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Yeshic Mine recorded 0.00 reportable injury cases per 100 full-time workers in 2011.
Injury rate, 2011
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 3.83 and the all-US-mining average was 3.08 cases per 100 workers.
In Alabama, coal mining averaged 4.75 cases per 100 workers that year.
Year
total case rate
days-away
fatal
2011
0.00
0.00
0.000
2010 *
4.38
4.38
0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Source: MSHA controller and operator history, updated weekly.
Workforce and production
ⓘCoal production is reported quarterly and lags the current period; the most recent quarters may be incomplete.
Year
Employees
Coal produced (tons)
2019
0
2018
0
2017
0
2016
0
2015
0
2014
0
2013
0
2012
0
2011
40
256,824
2010
46
216,050
2009
50
60,657
Source: MSHA quarterly employment and production, updated weekly.
Yeshic Mine sits in Shelby County, Alabama, where the Census mining category is 0.5% of county employment.
Local economic context
ⓘCounty figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Shelby County, Alabama · Population 226,955
0.5%
Mining share of county employment
$93,543
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘCitations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2019 Q3
0
0
0
2019 Q2
0
0
0
2019 Q1
0
0
0
2018 Q4
0
0
0
2018 Q3
0
0
0
2018 Q2
0
0
0
2018 Q1
0
0
0
2017 Q4
0
0
0
Show 32 earlier quartersHide earlier quarters
Quarter
Hours worked
Citations
S&S
Per 1M hrs
2017 Q3
0
0
0
2017 Q2
0
0
0
2017 Q1
0
0
0
2016 Q4
0
0
0
2016 Q3
0
0
0
2016 Q2
0
0
0
2016 Q1
0
0
0
2015 Q4
0
0
0
2015 Q2
0
0
0
2015 Q1
0
0
0
2014 Q4
0
0
0
2014 Q3
0
0
0
2014 Q2
0
0
0
2014 Q1
0
0
0
2013 Q4
0
0
0
2013 Q3
0
0
0
2013 Q2
0
0
0
2013 Q1
0
0
0
2012 Q4
0
0
0
2012 Q3
0
0
0
2012 Q2
0
0
0
2012 Q1
0
0
0
2011 Q4
25,744
0
0
0.0
2011 Q3
30,260
0
0
0.0
2011 Q2
26,357
5
1
189.7
2011 Q1
21,161
6
5
283.5
2010 Q4
23,511
0
0
0.0
2010 Q3
24,001
0
0
0.0
2010 Q2
21,215
2
0
94.3
2010 Q1
22,521
9
3
399.6
2009 Q4
25,071
0
0
0.0
2009 Q3
20,081
0
0
0.0
No fatalities recorded at this mine.
Reportable incidents
7 on file
2011 · 1 incident
April 23, 2011AL · Coallaborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitmanSLIP OR FALL OF PERSON
Employee was using a rope to pull the hood open on the service truck. While pulling the rope, slipped causing the employee to fall backwards, landing on his rear-end.
April 22, 2010AL · Coalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techSLIP OR FALL OF PERSON
Employee was changing a fuel filter on a CAT D10 dozer, when his foot slipped on the track, causing him to fall to the ground on his left arm. Jammed his arm around the elbow.
November 5, 2009AL · Coalbulldozer operator, universal operator, heavy equipment operator, operating engineerMACHINERY
Employee was putting discharge hose on pump in pit. He cranked pump and it blew off the discharge hose at the pump. The hose struck employee in the chest.
October 13, 2009AL · Coalmaintenance man, mechanic, repair/serviceman, boilermaker, fueler, tire tech, field service techSLIP OR FALL OF PERSON
Employee was cleaning coal in the pit, he got off of his trackhoe to move a pump hose. When he moved the hose it caused a rock to slide off the dig face and roll down and struck him in the lower left leg and foot.