American Engineering & Construction: 157 MSHA citations operator
Controlled by
Timothy P Smith
MSHA operator ID: 0051522
Watch this operator
Email me when a new MSHA incident is filed at any American Engineering & Construction mine.
- Fatalities
- 0
- Total incidents
- 8
- Mines on record
- 3
- Years on record
- 2003
Compliance record
MSHA citations since 2003
157
citations
53
significant & substantial
$11,656
proposed penalties
$10,844
paid to date
93% of proposed penalties paid to date, a $812 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2003
93
inspections on record
2,471
inspection hours
6.4
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.157 citations across 2,471 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.$12K
proposed penalties
$12K
current assessed
$11K
paid to date
$812
outstanding
151 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2005-11-03.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.34.4%
significant & substantial
12.5%
high negligence or reckless
34.2%
reasonably likely or greater
3.9%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 3.3% low, 84.2% moderate, 12.5% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2004
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 5.57 and the all-US-mining average was 4.33 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2004 * | 0.00 | 0.00 | 0.000 |
| 2003 * | 11.75 | 2.94 | 0.000 |
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2003-12-02, 22 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.100%
within 1.5 mg/m3
2
samples
0.39
dust max (mg/m3)
2 samples taken by MSHA inspectors, 0 by the operator.
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Top causes
- FALL OF ROOF OR BACK 3 non-fatal
- HANDTOOLS (NONPOWERED) 2 non-fatal
- HANDLING OF MATERIALS 1 non-fatal
- NO VALUE FOUND 1 non-fatal
- SLIP OR FALL OF PERSON 1 non-fatal
Incident timeline
2003
8
Mines on record
- Pyro Prep Plant KY
- Baker Mine KY
- Dyson Creek Mine KY
For insurers, brokers, and safety consultants
Where American Engineering & Construction stands on silica, penalties, and injury rate
MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.
The federal record itself stays free on this site. What costs money, and why.