Mining Incidents

Big Mack Leasing Co Inc: 1 recorded fatality operator

Controlled by Terry L Schall
MSHA operator ID: P22284

Watch this operator

Email me when a new MSHA incident is filed at any Big Mack Leasing Co Inc mine.

Fatalities
1
Total incidents
4
Mines on record
2
Years on record
1998–2002
Compliance record
MSHA citations since 2000
63
citations
39
significant & substantial
$8,401
proposed penalties
$7,850
paid to date
93% of proposed penalties paid to date, a $551 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
73
inspections on record
971
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 971 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$8K
proposed penalties
$8K
current assessed
$8K
paid to date
$0
outstanding
61 assessments are final orders; 9 contested dockets.
Of $4K in penalties contested before the Commission, $3K was upheld in final decisions.
As of the most recent assessment on 2015-01-07.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
62.9%
significant & substantial
9.7%
high negligence or reckless
62.9%
reasonably likely or greater
8.1%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 22.6% low, 67.7% moderate, 9.7% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2002
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
3.61
total case rate
3.61
days-away rate
3.610
fatality rate
Below average. The US coal mining average was 6.89 and the all-US-mining average was 5.05 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2002 * 3.61 3.61 3.610
2001 * 0.00 0.00 0.000
2000 * 5.23 5.23 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2015-01-07, 11 years ago
100%
within 1.5 mg/m3
103
samples
1.34
dust max (mg/m3)
0
over MSHA ECV
The excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.
76 samples taken by MSHA inspectors, 27 by the operator.
Most-sampled occupations
  • BULLDOZER OPERATOR45
  • HIGHLIFT OPERATOR/FRONT END LOADER21
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE19

Silica (quartz)

Last sampled: 2002-07-29, 24 years ago
17.1
silica avg (%)
9
samples
48.9
silica max (%)
Most-sampled occupations
  • BULLDOZER OPERATOR7
  • HIGHLIFT OPERATOR/FRONT END LOADER1
  • HIGHWALL DRILL OPERATOR1

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2015-01-07, 11 years ago
18%
over PEL
39
samples
Most-sampled occupations
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE12
  • HIGHLIFT OPERATOR/FRONT END LOADER10
  • MECHANIC8
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
When citations were contested
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
3 citations taken to the federal commission · 5% of citations on record
  • Settled 3 · 100%
67%
S&S designation survived the contest
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 3 decided S&S contests · industry: 79%
6%
Penalty reduction in decided contests
$216 proposed, $204 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2004-09-02. Vacated and withdrawn citations are removed from the file this view attributes through, so that outcome is slightly undercounted here.
Contested penalties
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this operator contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
PENN20010013 Settlement Zielinski 2001 $1K → $912
PENN20020145 Settlement Barbour 2002 $720 → $525
PENN20020202 Settlement Barbour 2002 $610 → $482
PENN20000138 Settlement Barbour 2000 $300 → $200
PENN20030022 Settlement Barbour 2002 $244 → $207
PENN20030023 Settlement Barbour 2002 $228 → $216
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

Top causes

Incident timeline

2002
1 (1f)
2001
1
2000
1
1998
1

Mines on record

Fatalities under this operator

1 recorded
August 13, 2002 PA · Coal driller, highwall operator, highwall drill operator Fatality · SLIP OR FALL OF PERSON
Big Mack Leasing Co Inc · Fall to lower level, (Not Elsewhere Classified)

EMPLOYEE STEPPED OFF 23 FT HIGHWALL ONTO ROCKS WAS STILL CONSCIENCE AFTER THE FALL, WAS TAKEN BY AMBULANCE TO KITTANNING HOSPITAL.

For insurers, brokers, and safety consultants

Where Big Mack Leasing Co Inc stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us