Mining Incidents
Search Operators Mines Alerts Research Controllers Fatalgrams About
English Español
← All operators

Blair Coal Co Inc.: 190 MSHA citations operator

Controlled by Ricky Blair
MSHA operator ID: P23622

Watch this operator

Email me when a new MSHA incident is filed at any Blair Coal Co Inc. mine.

Fatalities
0
Total incidents
27
Mines on record
6
Years on record
1998–2011
Compliance record
MSHA citations since 2000
190
citations
73
significant & substantial
$21,224
proposed penalties
$21,224
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
158
inspections on record
4,227
inspection hours
4.5
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
190 citations across 4,227 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$21K
proposed penalties
$21K
current assessed
$21K
paid to date
$0
outstanding
183 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2012-10-23.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
39.9%
significant & substantial
2.7%
high negligence or reckless
39.9%
reasonably likely or greater
20.2%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 13.1% low, 84.2% moderate, 2.7% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2007
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
9.67
total case rate
9.67
days-away rate
0.000
fatality rate
Above average. The US coal mining average was 4.71 and the all-US-mining average was 3.77 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2007 * 9.67 9.67 0.000
2005 * 19.92 19.92 0.000
2004 * 7.87 7.87 0.000
2003 * 7.31 7.31 0.000
2002 * 34.89 20.94 0.000
2001 * 7.22 7.22 0.000
2000 * 7.80 7.80 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
ⓘ Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2012-10-25, 13 years ago
95%
within 1.5 mg/m3
673
samples
6.96
dust max (mg/m3)
348 samples taken by MSHA inspectors, 325 by the operator.
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR317
  • SHUTTLE CAR OPERATOR (STANDARD SIDE)81
  • SCOOP CAR OPERATOR51

Silica (quartz)

Last sampled: 2012-01-19, 14 years ago
11.3
silica avg (%)
62
samples
42.2
silica max (%)
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR33
See US coal mines ranked by silica in their dust samples.

Noise
ⓘ The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2012-01-12, 14 years ago
7%
over PEL
61
samples
Most-sampled occupations
  • SHUTTLE CAR OPERATOR (STANDARD SIDE)14
  • CONTINUOUS MINER OPERATOR11
  • SCOOP CAR OPERATOR10
See US mines ranked by noise samples over the legal limit.
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Top causes

Incident timeline

2011
2
2010
1
2009
1
2008
1
2007
1
2005
2
2004
2
2003
3
2002
5
2001
1
2000
1
1999
5
1998
2

Mines on record

For insurers, brokers, and safety consultants

Where Blair Coal Co Inc. stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us