87% of proposed penalties paid to date, a $18,871 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
340
inspections on record
7,940
inspection hours
7.6
citations per 100 inspection hours
ⓘThis rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
606 citations across 7,940 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘDifferences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$27K
proposed penalties
$16K
current assessed
$16K
paid to date
$0
outstanding
109 assessments are final orders; 4 contested dockets.
Of $12K in penalties contested before the Commission, $1K was upheld in final decisions.
As of the most recent assessment on 2025-06-20.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘShares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2025
ⓘThis rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
3.80
total case rate
3.80
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 1.65 and the all-US-mining average was 1.97 cases per 100 workers.
Year
total case rate
days-away
fatal
2026 *
0.00
0.00
0.000
2025
3.80
3.80
0.000
2024 *
2.08
2.08
0.000
2023 *
0.00
0.00
0.000
2022 *
2.36
2.36
0.000
2021 *
2.79
2.79
0.000
2020
1.96
0.00
0.000
2019 *
4.13
2.07
0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
ⓘA sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.
Respirable coal dust
ⓘRespirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2026-06-23
99%
within 1.5 mg/m3
386
samples
4.45
dust max (mg/m3)
0
over MSHA ECV
ⓘThe excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.
334 samples taken by MSHA inspectors, 52 by the operator.
Noise
ⓘThe share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Metal and nonmetal contaminants (personal samples)
ⓘMany samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.
Last sampled: 2026-06-24
11%
of limit-tested samples over the exposure limit
82
samples
38
limit-tested
Most sampled contaminants
Quartz, respirable, >1% Qtz264 over
Respirable dust, <.1mg35
Arsenic fumes6
Beryllium fumes6
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
When citations were contested
ⓘContesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
15citations taken to the federal commission · 2% of citations on record
Settled
14 · 93%
Stood as issued
1 · 7%
75%
S&S designation survived the contest
ⓘCounts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.
of 12 decided S&S contests · industry: 79%
72%
Penalty reduction in decided contests
$25K proposed, $7K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2022-09-01. Vacated and withdrawn citations are removed from the file this view attributes through, so that outcome is slightly undercounted here.
Contested penalties
ⓘA reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this operator contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
May 30, 1986OH · Metal/Non-Metalbulldozer operator, universal operator, heavy equipment operator, operating engineerFatality · POWERED HAULAGE
Kimble Company · Struck by falling object
DRIVER WAS HAUL3NG MATERIAL ON A ROAD WITH APPROX. 17 GRADE, LOST CONTROL OF VEHICLE AND JUMPED FROM CAB.
For insurers, brokers, and safety consultants
Where Kimble Company stands on silica, penalties, and injury rate
MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes
dust and quartz as separate files and never the silica figure itself. We derive it per sample,
score it against the limit, and set the operator's injury rate against a benchmark built from
the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality
history. Delivered as a PDF with the underlying data as CSV.