RJC Kohl Inc: 5 MSHA citations operator
Controlled by
Joseph Cunningham; James E Cramer
MSHA operator ID: P22442
Watch this operator
Email me when a new MSHA incident is filed at any RJC Kohl Inc mine.
- Fatalities
- 0
- Total incidents
- 1
- Mines on record
- 1
- Years on record
- 2017
Compliance record
MSHA citations since 2011
5
citations
0
significant & substantial
$432
proposed penalties
$432
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
36
inspections on record
548
inspection hours
n/a
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Rate withheld: 548 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.$432
proposed penalties
$432
current assessed
$432
paid to date
$0
outstanding
4 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2017-09-07.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.0.0%
significant & substantial
0.0%
high negligence or reckless
0.0%
reasonably likely or greater
25.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 25.0% low, 75.0% moderate, 0.0% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2020-02-25, 6 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.100%
within 1.5 mg/m3
84
samples
0.79
dust max (mg/m3)
0
over MSHA ECV
ⓘ
The excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.47 samples taken by MSHA inspectors, 37 by the operator.
Most-sampled occupations
- BULLDOZER OPERATOR41
- HIGHWALL DRILL OPERATOR12
- HIGHLIFT OPERATOR/FRONT END LOADER9
Silica (quartz)
Last sampled: 2001-05-01, 25 years ago12.9
silica avg (%)
1
samples
12.9
silica max (%)
Most-sampled occupations
- HIGHLIFT OPERATOR/FRONT END LOADER1
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2020-03-03, 6 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.4%
over PEL
26
samples
Most-sampled occupations
- BULLDOZER OPERATOR7
- HIGHLIFT OPERATOR/FRONT END LOADER7
- MECHANIC6
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Top causes
- OTHER 1 non-fatal
Incident timeline
2017
1
Mines on record
For insurers, brokers, and safety consultants
Where RJC Kohl Inc stands on silica, penalties, and injury rate
MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.
The federal record itself stays free on this site. What costs money, and why.