Mining Incidents
Abandoned mine inventory

Abandoned mines in New York

New York has 6,998 mine and prospect features on USGS topographic maps published 1892–1999, including 88 mine openings (shafts, adits and air shafts), across 59 counties. MSHA's register carries 1,986 New York mines with status Abandoned or Abandoned and Sealed.

Every mine and prospect feature the USGS digitized from historical topographic maps of New York, every OSMRE abandoned mine land problem, and every MSHA-registered mine with status Abandoned, by county. Each county page lists the named features and links every MSHA mine to its own record.

Mapped mine features (USGS)
6,998
Mine openings
88
OSMRE problems unreclaimed
0
MSHA mines marked abandoned
1,986
59 counties with mapped features54 features carry a name0 prospect pitsmaps published 1892–1999 0 MSHA mines abandoned and sealed The state program's own inventory estimate: ~1,600 sites (IMCC-NAAMLP Hardrock AML Report 2025, Table 5, page 46).
By countyranked by mapped USGS features
County USGS features Openings OSMRE problems MSHA abandoned
St. Lawrence County
622 20 0 69
Oswego County
292 0 0 51
Clinton County
246 13 0 53
Onondaga County
227 0 0 31
Cattaraugus County
223 0 0 31
Franklin County
221 0 0 43
Jefferson County
214 0 0 59
Essex County
195 29 0 82
Delaware County
187 0 0 83
Otsego County
179 0 0 41
Ulster County
169 3 0 50
Steuben County
167 0 0 71
Oneida County
166 0 0 60
Suffolk County
165 0 0 56
Dutchess County
162 0 0 70
Saratoga County
158 0 0 50
Allegany County
158 0 0 19
Madison County
147 0 0 29
Fulton County
146 0 0 22
Schoharie County
137 0 0 8
Chautauqua County
132 0 0 34
Albany County
132 0 0 29
Ontario County
130 0 0 57
Sullivan County
130 3 0 29
Wayne County
123 0 0 36
Orange County
122 1 0 32
Herkimer County
115 0 0 21
Monroe County
110 1 0 19
Erie County
107 3 0 23
Warren County
105 3 0 36
Lewis County
101 0 0 25
Rensselaer County
99 0 0 50
Columbia County
99 0 0 26
Genesee County
91 2 0 16
Hamilton County
90 1 0 7
Cayuga County
89 0 0 19
Tompkins County
88 0 0 36
Greene County
83 0 0 21
Wyoming County
78 0 0 29
Livingston County
69 3 0 30
Broome County
65 0 0 81
Washington County
61 2 0 91
Yates County
56 0 0 17
Seneca County
54 0 0 2
Chenango County
52 0 0 63
Westchester County
50 0 0 11
Nassau County
46 0 0 4
Schenectady County
45 0 0 14
Niagara County
45 0 0 3
Montgomery County
44 0 0 17
Cortland County
44 0 0 13
Chemung County
40 0 0 32
Schuyler County
30 0 0 20
Tioga County
27 0 0 33
Putnam County
23 4 0 11
Rockland County
22 0 0 6
Richmond County
9 0 0 0
Orleans County
7 0 0 9
Queens County
3 0 0 0
New York County
0 0 0 4
Bronx County
0 0 0 1
Kings County
0 0 0 1
What the features are
  1. Mine openings
    shafts, adits, air shafts, portals and vertical openings: the ways into underground workings
    88 1.3%
  2. Mines and surface workings
    labelled mines, open pits, strip mines, placer and hydraulic workings
    2,589 37.0%
  3. Quarries, gravel and borrow pits
    construction-material and industrial-mineral extraction
    4,283 61.2%
  4. Dumps, tailings, spoil and gob
    what mining left above ground
    37 0.5%
  5. Mills, tipples and facilities
    processing plants and hazardous structures
    1 0.0%
By source vocabularythe publishers' own terms
Feature type Features
Gravel Pit 2,093
Open Pit Mine or Quarry 1,772
Gravel Pit 593
Disturbed Surface 551
Gravel/Borrow Pit - Undifferentiated 540
Quarry 396
Sand Pit 227
Open Pit Mine or Quarry 192
Quarry 98
Sand Pit 80
Sand and Gravel Pit 72
Mine Shaft 61
Shale Pit 47
Open Pit Mine 47
Sand and Gravel Pit 38
Gravel/Borrow Pit - Undifferentiated 38
Adit 26
Borrow Pit 20
Mine Dump 14
Shale Pit 13
Mine 12
Tailings - Undifferentiated 11
Quarry - Rock 9
Clay Pit 8
Open Pit Mine 8
Tailings - Pond 8
Quarry - Rock 7
Strip Mine 4
Clay Pit 4
Settling Pond 2
Mine Dump 2
Disturbed Surface - Pit 2
Tipple 1
Air Shaft 1
Strip Mine 1
How to read these numbers

A USGS feature is a symbol on a historical topographic map, there when the map was surveyed; it may since have been sealed, reclaimed, built over or reopened, and the map does not say which. An OSMRE row is a problem the abandoned mine land program tracks, not a mine, and several problems make one problem area (PAD), which is the unit a state program counts and reports; the public extract can also hold more problem areas than a state's live inventory, because areas since merged or ruled ineligible stay in the published file, so a state figure that differs from this one is not a contradiction. An MSHA mine is a registered operation whose operator reported abandonment, a record that starts in the 1970s; that is a regulatory status rather than a physical one, and it also holds operations merely between jobs, portable crushers above all, which is why over a thousand mines carrying it have been inspected in the last two years. The three overlap and are never added together. Counties are assigned from each feature's coordinates against the Census 2023 county boundaries. The full method and every source are on the national page.

Sources
  1. USGS, Consolidated Prospect- and Mine-Related Features from 7.5- and 15-Minute Topographic Quadrangle Maps of the United States (USMIN)
    597,612 point and area features digitized from about 106,350 historical topographic maps published 1886–2006; public domain (CC0). A feature is a map symbol, not a field-verified site, and the map does not say whether it was still worked.
  2. USGS Fact Sheet 2025–3003, The Abandoned Mine Inventory of the United States
    States that as of 2025 there is no comprehensive national inventory of abandoned mine features, and that the detailed national database now being built will not be published.
  3. OSMRE, Abandoned Mine Land Inventory System (e-AMLIS), public Problems layer
    One row per abandoned mine land problem in a problem area, with its type, funding program and reclamation status; mostly coal mined before the 1977 Surface Mining Control and Reclamation Act. Coordinates are the problem area's.
  4. MSHA, Mines dataset (Mine Data Retrieval System)
    Every mine registered with MSHA since the 1970s; a mine reads Abandoned or Abandoned and Sealed when its operator reported that status. Refreshed weekly.
  5. US Census Bureau, 2023 cartographic county boundaries (1:500,000)
    Each feature's county is assigned by its coordinates against these boundaries, not copied from the source file.
  6. GAO-20-238, Abandoned Hardrock Mines (March 2020)
    Federal agencies had identified at least 140,000 abandoned hardrock mine features on federal land and estimated more than 390,000 more not yet captured in their databases.
  7. Abandoned Hardrock Mine Reclamation (AHMR) Program, US Department of the Interior
    The program the USGS inventory is compiled for. Its appropriations and the 674,000 field-confirmed feature count on this page were provided by the program manager, Office of Environmental Policy and Compliance, and are cited with permission (2026-09-08).
  8. IMCC-NAAMLP Hardrock AML Report
    Page 48 carries the two figures this page leans on: USGS estimates 633,181 of the 725,690 mine features it recorded from historic topographic maps, 87 percent, are hardrock; and state and federal agencies have submitted more than 724,000 AML features to the national database being built, already more than the historic maps hold. Year-by-year AHMR funding is on page 35.