Mining Incidents

Childers Spencer & Wesley: 16 reportable incidents controller

MSHA controller ID: C00802

Watch this controller

Email me when a new MSHA incident is filed at any mine Childers Spencer & Wesley controls.

Fatalities
0
Total incidents
16
Mines on record
2
Years on record
1984–1992
Injury rate, 2008
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US coal mining average was 4.41 and the all-US-mining average was 3.61 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2008 * 0.00 0.00 0.000
2007 0.00 0.00 0.000
2006 0.00 0.00 0.000
2005 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2008-10-09, 17 years ago
96%
within 1.5 mg/m3
383
samples
4.62
dust max (mg/m3)
184 samples taken by MSHA inspectors, 199 by the operator.
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR214
  • SHUTTLE CAR OPERATOR (STANDARD SIDE)57
  • ROOF BOLTER (TWIN HEAD) (RETURN SIDE)22

Silica (quartz)

Last sampled: 2008-05-30, 18 years ago
5.5
silica avg (%)
28
samples
7.1
silica max (%)
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR22

Noise
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2008-10-14, 17 years ago
6%
over PEL
53
samples
Most-sampled occupations
  • SHUTTLE CAR OPERATOR (STANDARD SIDE)16
  • CONTINUOUS MINER OPERATOR8
  • ROOF BOLTER (TWIN HEAD) (INTAKE SIDE)7
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Top causes

Incident timeline

1992
2
1991
4
1990
7
1989
2
1984
1

Operators under this controller

Mines on record

For insurers, brokers, and safety consultants

Where Childers Spencer & Wesley stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us