Eagle Summit Resources LLC: 7 MSHA citations controller
MSHA controller ID: 0196420
Watch this controller
Email me when a new MSHA incident is filed at any mine Eagle Summit Resources LLC controls.
- Fatalities
- 0
- Total incidents
- 2
- Mines on record
- 2
- Years on record
- 2026
Compliance record
MSHA citations since 2025
7
citations
4
significant & substantial
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2025
19
inspections on record
339
inspection hours
n/a
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Rate withheld: 339 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Imminent-danger orders
ⓘ
A Section 107(a) order removes miners from an area when an inspector finds an imminent danger. Each order is lifted once the condition is corrected, so this counts orders issued, not orders now in effect.1
Section 107(a) orders
Most recent order: 2026-04-29.
On record since 2026.
Source: MSHA imminent-danger order records, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.66.7%
significant & substantial
33.3%
high negligence or reckless
66.7%
reasonably likely or greater
33.3%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 33.3% low, 33.3% moderate, 33.3% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2025
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 3.19 and the all-US-mining average was 1.97 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2026 * | 5.38 | 5.38 | 0.000 |
| 2025 * | 0.00 | 0.00 | 0.000 |
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2026-08-05
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.100%
within 1.5 mg/m3
51
samples
0.66
dust max (mg/m3)
0
over MSHA ECV
ⓘ
The excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.22 samples taken by MSHA inspectors, 29 by the operator.
Most-sampled occupations
- BULLDOZER OPERATOR35
- HIGHWALL DRILL OPERATOR9
- REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE2
Silica (quartz)
Last sampled: 2026-06-108.0
silica avg (%)
5
samples
12.4
silica max (%)
Most-sampled occupations
- BULLDOZER OPERATOR5
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2025-10-16
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.0%
over PEL
5
samples
Most-sampled occupations
- BULLDOZER OPERATOR4
- MINE FOREMAN/MINE MANAGER1
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Top causes
- HANDLING OF MATERIALS 1 non-fatal
- SLIP OR FALL OF PERSON 1 non-fatal
Incident timeline
2026
2
Operators under this controller
Mines on record
For insurers, brokers, and safety consultants
Where Eagle Summit Resources LLC stands on silica, penalties, and injury rate
MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.
The federal record itself stays free on this site. What costs money, and why.