Edward A Green: 45 MSHA citations controller
MSHA controller ID: 0096793
Edward A Green has no reportable incidents on file with MSHA. MSHA has proposed $30K in penalties since 2010.
Watch this controller
Email me when a new MSHA incident is filed at any mine Edward A Green controls.
- Fatalities
- 0
- Total incidents
- 0
- Mines on record
- 0
- Years on record
- —
Compliance record
MSHA citations since 2010
45
citations
24
significant & substantial
$29,560
proposed penalties
$25,140
paid to date
85% of proposed penalties paid to date, a $4,420 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2010
11
inspections on record
463
inspection hours
n/a
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.Rate withheld: 463 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.$30K
proposed penalties
$25K
current assessed
$25K
paid to date
$0
outstanding
45 assessments are final orders; 1 contested dockets.
Of $22K in penalties contested before the Commission, $18K was upheld in final decisions.
As of the most recent assessment on 2012-01-11.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.53.3%
significant & substantial
4.4%
high negligence or reckless
53.3%
reasonably likely or greater
15.6%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 0.0% low, 95.6% moderate, 4.4% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2011
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000 and are withheld below 20,000 hours in a year. Employment reports reach back to 1983, but those earlier years come from MSHA's archived file format and are not used in rates.0.00
total case rate
0.00
days-away rate
0.000
fatality rate
No reportable injury cases in any year shown. Employee-hours were reported in each of those years, so these are true zeros rather than missing data. Citations, listed in the compliance record above, are inspector-found violations and are counted separately from worker injuries.
Below average. The US coal mining average was 3.83 and the all-US-mining average was 3.08 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2011 * | 0.00 | 0.00 | 0.000 |
| 2010 * | 0.00 | 0.00 | 0.000 |
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2012-01-05, 14 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.83%
within 1.5 mg/m3
58
samples
20.30
dust max (mg/m3)
46 samples taken by MSHA inspectors, 12 by the operator.
Most-sampled occupations
- CONTINUOUS MINER OPERATOR12
- SHUTTLE CAR OPERATOR (STANDARD SIDE)8
- BULLDOZER OPERATOR6
Silica (quartz)
Last sampled: 2011-05-06, 15 years ago14.3
silica avg (%)
10
samples
45.9
silica max (%)
Most-sampled occupations
- CONTINUOUS MINER OPERATOR3
- BACKHOE OPERATOR1
- BULLDOZER OPERATOR1
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2011-04-29, 15 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.8%
over PEL
12
samples
Most-sampled occupations
- SCOOP CAR OPERATOR2
- BACKHOE OPERATOR1
- BELT CLEANER1
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
When citations were contested
ⓘ
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
2
citations taken to the federal commission · 4% of citations on record
- Settled 2 · 100%
100%
S&S designation survived the contest
ⓘ
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.of 2 decided S&S contests · industry: 79%
20%
Penalty reduction in decided contests
$22K proposed, $18K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2011-08-12. Vacated and withdrawn citations are removed from the file this view attributes through, so that outcome is slightly undercounted here.
Contested penalties
ⓘ
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.Largest penalties this controller contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
| Docket | Decision | Judge | Year | Proposed / upheld |
|---|---|---|---|---|
| VA 2011-627 | Settlement | Lesnick | 2012 | $22K → $18K |
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
No reportable incidents on file.
MSHA has no recorded reportable accidents associated with this controller.
For insurers, brokers, and safety consultants
Where Edward A Green stands on silica, penalties, and injury rate
MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.
The federal record itself stays free on this site. What costs money, and why.