Mining Incidents
Search Operators Mines Alerts Research Controllers Fatalgrams About
English Español
← All controllers

Jerry Bevins: 233 MSHA citations controller

MSHA controller ID: 0096493

Watch this controller

Email me when a new MSHA incident is filed at any mine Jerry Bevins controls.

Fatalities
0
Total incidents
3
Mines on record
2
Years on record
2011–2013
Compliance record
MSHA citations since 2010
233
citations
37
significant & substantial
$26,458
proposed penalties
$26,458
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2010
99
inspections on record
3,400
inspection hours
6.9
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
233 citations across 3,400 inspection hours.
Source: MSHA inspections data, updated weekly.
Imminent-danger orders
ⓘ A Section 107(a) order removes miners from an area when an inspector finds an imminent danger. Each order is lifted once the condition is corrected, so this counts orders issued, not orders now in effect.
1
Section 107(a) orders
Most recent order: 2016-05-13.
On record since 2016.
Source: MSHA imminent-danger order records, updated weekly.
Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$26K
proposed penalties
$26K
current assessed
$26K
paid to date
$0
outstanding
227 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2016-05-23.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
16.3%
significant & substantial
3.1%
high negligence or reckless
16.3%
reasonably likely or greater
7.9%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 27.8% low, 69.2% moderate, 3.1% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2015
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 3.76 and the all-US-mining average was 2.72 cases per 100 workers.
Year total case rate days-away fatal
2015 0.00 0.00 0.000
2014 0.00 0.00 0.000
2013 0.97 0.97 0.000
2012 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
ⓘ Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2015-11-16, 10 years ago
98%
within 1.5 mg/m3
688
samples
3.61
dust max (mg/m3)
5
over MSHA ECV
ⓘ The excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.
322 samples taken by MSHA inspectors, 366 by the operator.
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR228
  • CUTTING MACHINE OPERATOR107
  • SHUTTLE CAR OPERATOR (STANDARD SIDE)56

Silica (quartz)

Last sampled: 2015-11-25, 10 years ago
6.7
silica avg (%)
37
samples
27.0
silica max (%)
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR20
  • CUTTING MACHINE OPERATOR7
  • ROOF BOLTER (SINGLE HEAD)4
See US coal mines ranked by silica in their dust samples.

Noise
ⓘ The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2016-04-06, 10 years ago
0%
over PEL
95
samples
Most-sampled occupations
  • SCOOP CAR OPERATOR14
  • SHUTTLE CAR OPERATOR (STANDARD SIDE)11
  • CONTINUOUS MINER OPERATOR7
See US mines ranked by noise samples over the legal limit.
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Top causes

Incident timeline

2013
1
2011
2

Operators under this controller

Mines on record

For insurers, brokers, and safety consultants

Where Jerry Bevins stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us