Jerry Stacy: 148 MSHA citations controller
MSHA controller ID: 0090633
Jerry Stacy has had no fatalities among 1 reportable incident since 2011. MSHA has proposed $31K in penalties since 2010, with $3 outstanding.
Watch this controller
Email me when a new MSHA incident is filed at any mine Jerry Stacy controls.
- Fatalities
- 0
- Total incidents
- 1
- Mines on record
- 1
- Years on record
- 2011
Compliance record
MSHA citations since 2010
148
citations
38
significant & substantial
$31,158
proposed penalties
$31,155
paid to date
100% of proposed penalties paid to date, a $3 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2010
35
inspections on record
1,061
inspection hours
13.9
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.148 citations across 1,061 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.$31K
proposed penalties
$31K
current assessed
$31K
paid to date
$3
outstanding
147 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2013-08-26.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.25.9%
significant & substantial
6.8%
high negligence or reckless
25.9%
reasonably likely or greater
21.8%
permanently disabling or fatal if injury occurs
Negligence coding: 0.7% none, 28.6% low, 63.9% moderate, 6.8% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2011
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000 and are withheld below 20,000 hours in a year. Employment reports reach back to 1983, but those earlier years come from MSHA's archived file format and are not used in rates.6.64
total case rate
6.64
days-away rate
0.000
fatality rate
Above average. The US coal mining average was 3.83 and the all-US-mining average was 3.08 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2013-06-20, 13 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.92%
within 1.5 mg/m3
186
samples
12.85
dust max (mg/m3)
90 samples taken by MSHA inspectors, 96 by the operator.
Most-sampled occupations
- CONTINUOUS MINER OPERATOR102
- SHUTTLE CAR OPERATOR (STANDARD SIDE)14
- SHUTTLE CAR OPERATOR (OFF STANDARD)11
Silica (quartz)
Last sampled: 2012-12-27, 13 years ago5.5
silica avg (%)
10
samples
13.9
silica max (%)
Most-sampled occupations
- CONTINUOUS MINER OPERATOR8
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2011-12-16, 14 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.0%
over PEL
15
samples
Most-sampled occupations
- ROOF BOLTER (SINGLE HEAD)4
- CONTINUOUS MINER OPERATOR3
- SHUTTLE CAR OPERATOR (OFF STANDARD)3
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Top causes
- POWERED HAULAGE 1 non-fatal
Incident timeline
2011
1
Operators under this controller
Mines on record
For insurers, brokers, and safety consultants
Where Jerry Stacy stands on silica, penalties, and injury rate
MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.
The federal record itself stays free on this site. What costs money, and why.