Mining Incidents

MDM HOLDING INCORPORATED: 298 MSHA citations controller

MSHA controller ID: 0040746

MDM HOLDING INCORPORATED has had no fatalities among 14 reportable incidents since 2002. MSHA has proposed $28K in penalties since 2002.

Watch this controller

Email me when a new MSHA incident is filed at any mine MDM HOLDING INCORPORATED controls.

Fatalities
0
Total incidents
14
Mines on record
2
Years on record
2002
Compliance record
MSHA citations since 2002
298
citations
81
significant & substantial
$27,705
proposed penalties
$27,594
paid to date
100% of proposed penalties paid to date, a $111 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2002
57
inspections on record
1,997
inspection hours
14.9
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
298 citations across 1,997 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$28K
proposed penalties
$28K
current assessed
$28K
paid to date
$0
outstanding
286 assessments are final orders; 1 contested dockets.
Of $224 in penalties contested before the Commission, $113 was upheld in final decisions.
As of the most recent assessment on 2002-10-03.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
27.6%
significant & substantial
0.3%
high negligence or reckless
27.6%
reasonably likely or greater
31.7%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 1.7% low, 98.0% moderate, 0.3% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2002
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000 and are withheld below 20,000 hours in a year. Employment reports reach back to 1983, but those earlier years come from MSHA's archived file format and are not used in rates.
8.30
total case rate
8.30
days-away rate
0.000
fatality rate
Above average. The US coal mining average was 6.89 and the all-US-mining average was 5.05 cases per 100 workers.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
ⓘ Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2002-10-08, 24 years ago
78%
within 1.5 mg/m3
152
samples
5.26
dust max (mg/m3)
72 samples taken by MSHA inspectors, 80 by the operator.
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR85
  • SHUTTLE CAR OPERATOR (STANDARD SIDE)37
  • ROOF BOLTER (TWIN HEAD) (RETURN SIDE)8

Silica (quartz)

Last sampled: 2002-09-23, 24 years ago
3.0
silica avg (%)
13
samples
8.1
silica max (%)
Most-sampled occupations
  • CONTINUOUS MINER OPERATOR10

Noise
ⓘ The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2002-09-30, 24 years ago
12%
over PEL
17
samples
Most-sampled occupations
  • SHUTTLE CAR OPERATOR (STANDARD SIDE)6
  • BULLDOZER OPERATOR3
  • CONTINUOUS MINER OPERATOR2
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
Contested penalties
ⓘ A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this controller contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
LAKE 2004-16 Settlement Bulluck 2004 $224 → $113
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.

Top causes

Incident timeline

2002
14

Operators under this controller

Mines on record

For insurers, brokers, and safety consultants

Where MDM HOLDING INCORPORATED stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us