Roger N Bentley: 404 MSHA citations controller
MSHA controller ID: C13662
Watch this controller
Email me when a new MSHA incident is filed at any mine Roger N Bentley controls.
- Fatalities
- 0
- Total incidents
- 58
- Mines on record
- 7
- Years on record
- 1989–2005
Compliance record
MSHA citations since 2000
404
citations
142
significant & substantial
$192,449
proposed penalties
$148,514
paid to date
77% of proposed penalties paid to date, a $43,935 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2000
122
inspections on record
3,124
inspection hours
12.9
citations per 100 inspection hours
ⓘ
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.404 citations across 3,124 inspection hours.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘ
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.$192K
proposed penalties
$149K
current assessed
$149K
paid to date
$10
outstanding
402 assessments are final orders; 4 contested dockets.
Of $154K in penalties contested before the Commission, $110K was upheld in final decisions.
As of the most recent assessment on 2006-02-02.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.35.3%
significant & substantial
2.5%
high negligence or reckless
35.6%
reasonably likely or greater
6.7%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 8.5% low, 89.1% moderate, 2.5% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2005
ⓘ
This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.13.40
total case rate
11.48
days-away rate
0.000
fatality rate
Above average. The US coal mining average was 5.11 and the all-US-mining average was 4.21 cases per 100 workers.
| Year | total case rate | days-away | fatal |
|---|---|---|---|
| 2005 | 13.40 | 11.48 | 0.000 |
| 2004 * | 22.77 | 22.77 | 0.000 |
| 2003 * | 26.52 | 26.52 | 0.000 |
| 2002 * | 3.59 | 3.59 | 0.000 |
| 2001 * | 6.52 | 6.52 | 0.000 |
| 2000 * | 3.86 | 3.86 | 0.000 |
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
ⓘ
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.Respirable coal dust
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.
Last sampled: 2006-02-13, 20 years ago
ⓘ
Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.89%
within 1.5 mg/m3
558
samples
9.72
dust max (mg/m3)
314 samples taken by MSHA inspectors, 244 by the operator.
Most-sampled occupations
- CUTTING MACHINE OPERATOR254
- SCOOP CAR OPERATOR88
- COAL DRILL OPERATOR51
Silica (quartz)
Last sampled: 2006-01-31, 20 years ago2.7
silica avg (%)
41
samples
11.3
silica max (%)
Most-sampled occupations
- CUTTING MACHINE OPERATOR26
Noise
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.
Last sampled: 2005-11-16, 20 years ago
ⓘ
The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.7%
over PEL
44
samples
Most-sampled occupations
- SCOOP CAR OPERATOR12
- ROOF BOLTER (SINGLE HEAD)11
- COAL DRILL OPERATOR9
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.
When citations were contested
ⓘ
Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
9
citations taken to the federal commission · 2% of citations on record
- Settled 9 · 100%
100%
S&S designation survived the contest
ⓘ
Counts a Significant & Substantial citation as surviving when a settlement or judge's decision kept the designation, or the contest was dismissed or defaulted so the citation stands as issued. Vacated and withdrawn citations, and settlements that removed the designation, count against.of 8 decided S&S contests · industry: 79%
29%
Penalty reduction in decided contests
$153K proposed, $110K after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2006-07-06. Vacated and withdrawn citations are removed from the file this view attributes through, so that outcome is slightly undercounted here.
Contested penalties
ⓘ
A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.Largest penalties this controller contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
| Docket | Decision | Judge | Year | Proposed / upheld |
|---|---|---|---|---|
| KENT 2007-84 | Settlement | Weisberger | 2007 | $139K → $99K |
| KENT 2006-235 | Settlement | Weisberger | 2007 | $9K → $6K |
| KENT 2006-398 | Settlement | Weisberger | 2006 | $5K → $5K |
| KENT 2003-382 | Settlement | Lesnick | 2003 | $60 → $60 |
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Top causes
- MACHINERY 16 non-fatal
- FALL OF ROOF OR BACK 10 non-fatal
- POWERED HAULAGE 8 non-fatal
- HANDLING OF MATERIALS 7 non-fatal
- HANDTOOLS (NONPOWERED) 6 non-fatal
- NO VALUE FOUND 2 non-fatal
Incident timeline
2005
7
2004
9
2003
8
2002
1
2001
2
2000
1
1999
2
1998
3
1997
3
1995
5
1994
3
1993
4
1992
6
1990
2
1989
2
Operators under this controller
Mines on record
For insurers, brokers, and safety consultants
Where Roger N Bentley stands on silica, penalties, and injury rate
MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.
The federal record itself stays free on this site. What costs money, and why.