Mining Incidents
Search Operators Mines Alerts Research Controllers Fatalgrams About
English Español
← All controllers

Samuel Walker: 32 MSHA citations controller

MSHA controller ID: 0110683

Watch this controller

Email me when a new MSHA incident is filed at any mine Samuel Walker controls.

Fatalities
0
Total incidents
1
Mines on record
1
Years on record
2016
Compliance record
MSHA citations since 2014
32
citations
22
significant & substantial
$6,187
proposed penalties
$6,187
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2014
15
inspections on record
494
inspection hours
n/a
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 494 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.
Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$6K
proposed penalties
$6K
current assessed
$6K
paid to date
$0
outstanding
31 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2018-12-19.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
71.0%
significant & substantial
3.2%
high negligence or reckless
74.2%
reasonably likely or greater
0.0%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 19.4% low, 77.4% moderate, 3.2% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Injury rate, 2018
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
0.00
total case rate
0.00
days-away rate
0.000
fatality rate
Below average. The US coal mining average was 3.34 and the all-US-mining average was 2.33 cases per 100 workers.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2018 * 0.00 0.00 0.000
2017 * 0.00 0.00 0.000
2016 * 7.63 7.63 0.000
2015 * 0.00 0.00 0.000
2014 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Respirable coal dust
ⓘ Respirable coal dust and silica figures cover coal facilities. Dust compliance is measured against the current 1.5 mg/m3 standard; samples predating the 2014 standard are included, so compliance rates are a coarse historical signal.

Last sampled: 2020-09-08, 5 years ago
99%
within 1.5 mg/m3
84
samples
1.78
dust max (mg/m3)
0
over MSHA ECV
ⓘ The excessive concentration value (ECV) is MSHA's own per-sample enforcement threshold, which builds in measurement uncertainty; a sample over its ECV can trigger a citation. The count covers only samples MSHA assigned an ECV.
63 samples taken by MSHA inspectors, 21 by the operator.
Most-sampled occupations
  • BULLDOZER OPERATOR36
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE21
  • BACKHOE OPERATOR11

Silica (quartz)

Last sampled: 2019-04-08, 7 years ago
6.7
silica avg (%)
5
samples
9.0
silica max (%)
Most-sampled occupations
  • BULLDOZER OPERATOR5
See US coal mines ranked by silica in their dust samples.

Noise
ⓘ The share counts noise samples whose measured dose exceeded the 90 dBA permissible exposure limit. It describes the sampled workplace, not what reached the miner's ear: hearing conservation programs and the hearing protection worn during the shift are recorded separately and are not reflected here.

Last sampled: 2020-09-08, 5 years ago
0%
over PEL
40
samples
Most-sampled occupations
  • REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE14
  • BULLDOZER OPERATOR10
  • HIGHLIFT OPERATOR/FRONT END LOADER7
See US mines ranked by noise samples over the legal limit.
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly.

Top causes

Incident timeline

2016
1

Operators under this controller

Mines on record

For insurers, brokers, and safety consultants

Where Samuel Walker stands on silica, penalties, and injury rate

MSHA's standard limits respirable silica to 50 micrograms per cubic metre, but MSHA publishes dust and quartz as separate files and never the silica figure itself. We derive it per sample, score it against the limit, and set the operator's injury rate against a benchmark built from the full MSHA operator record. With the 26-year penalty trail, contest posture, and fatality history. Delivered as a PDF with the underlying data as CSV.

The federal record itself stays free on this site. What costs money, and why.

See a sample report
Need a different cut of the data? Ask us